[1] TANG Y, WANG J, LI X D, et al. Polymer-derived SiBN fiber for high-temperature structural/functional applications[J]. Chemistry-A European Journal, 2010, 16(22): 6458-6462.
[4] QI G, ZHANG C, HU H, et al. Three-dimensional silica fiber reinforced silicon nitride-based composites fabricated via different polysilazanes[J]. Advanced Engineering Materials, 2005, 7(11): 1043-1046.
[7] HU X, SHAO C W, WANG J, et al. Characterization and high-temperature degradation mechanism of continuous silicon nitride fibers[J]. Journal of Materials Science, 2017, 52(12): 1-12.
[9] TOURY B, MIELE P, CORNU D, et al. Boron nitride fibers prepared from symmetric and asymmetric alkylaminoborazines[J]. Advanced Functional Materials, 2002, 12(3): 228-234.
[10] YANG X J, LI B, LI D, et al. High-temperature properties and interface evolution of silicon nitride fiber reinforced silica matrix wave-transparent composite materials[J]. Journal of the European Ceramic Society, 2019, 39(2/3): 240-248.
[11] LI B, LIU K, ZHANG C R, et al. Fabrication and properties of borazine derived boron nitride bonded porous silicon aluminum oxynitride wave-transparent composite[J]. Journal of the European Ceramic Society, 2014, 34(15): 3591-3595.
[15] SONG M, YAN L W, LI Y F, et al. Thermal insulated C/SiC nanofiber aerogel with high thermal stability and superior electromagnetic wave absorption performance[J]. Ceramics International, 2024, 50(16): 28907-28917.
[16] WEI C C, ZHANG Z Y, XUE Y L, et al. Toughening and ablation mechanism of Si3N4 short fiber toughened ZrB2-based ceramics[J]. Journal of the European Ceramic Society, 2023, 43(13): 5425-5435. 2023
[17] BERNARD S, CORNU D, MIELE P, et al. Pyrolysis of poly［2, 4, 6-tri(methylamino)borazine］and its conversion into BN fibers[J]. Journal of Organometallic Chemistry, 2002, 657(1/2): 91-97.
[19] LIU Y, PAN Y C, YIN D Q, et al. Mechanical properties and thickness-determined fracture mode of hexagonal boron nitride nanosheets under nanoindentation simulations[J]. Computational Materials Science, 2021, 186: 110047.
[25] SHI Y, YUAN S, TER-OVANESSIAN B, et al. Enhancing the barrier effect of sol-gel derived inorganic coating by doping h-BN nanosheet[J]. Applied Surface Science, 2021, 544: 148849.
[26] WANG W, DENG P Y, LIU X Q, et al. A CsPbBr3 quantum dots/ultra-thin BN fluorescence sensor for stability and highly sensitive detection of tetracycline[J]. Microchemical Journal, 2020, 162(22): 105876.
[27] LEI Y, WANG Y D, SONG Y C, et al. Nearly stoichiometric BN fiber with low dielectric constant derived from poly［(alkylamino)borazine］[J]. Materials Letters, 2011, 65(2): 157-159.
[28] DU Z, FENG L, GUO Z, et al. Ultrathin h-BN/Bi2MoO6 heterojunction with synergetic effect for visible-light photocatalytic tetracycline degradation[J]. Journal of Colloid and Interface Science, 2021, 589(1): 545-555.
[30] LONG X, WU Z Y, SHAO C, et al. High-temperature oxidation behavior of SiBN fibers in air[J]. Journal of Advanced Ceramics, 2021, 10(4): 768-777.
[32] CORNU D, BERNARD S, DUPERRIER S, et al. Alkylaminoborazine-based precursors for the preparation of boron nitride fibers by the polymer-derived ceramics (PDCs) route[J]. Journal of the European Ceramic Society, 2005, 25(2/3): 111-121.
[33] AHMAD P, KHANDAKER M U, MUHAMMAD N, et al. Synthesis of multilayered hexagonal boron nitride microcrystals as a potential hydrogen storage element[J]. Ceramics International, 2017, 43(9): 7358-7361.
[35] BERNARD S, WEINMANN M, GERSTEL P, et al. Boron-modified polysilazane as a novel single-source precursor for SiBCN ceramic fibers: synthesis, melt-spinning, curing and ceramic conversion[J]. Journal of Materials Chemistry, 2005, 15(2): 289-299.
