• Journal of the European Optical Society-Rapid Publications
  • Vol. 20, Issue 1, 2024043 (2024)
Patrick Pfuhl* and Markus Degünther
DOI: 10.1051/jeos/2024043 Cite this Article
Patrick Pfuhl, Markus Degünther. Additively manufactured structures for precise and robust mounting of optical elements[J]. Journal of the European Optical Society-Rapid Publications, 2024, 20(1): 2024043 Copy Citation Text show less
References

[1] A Zolfaghari, T Chen, AY Yi. Additive manufacturing of precision optics at micro and nanoscale. Int. J. Extreme Manuf., 1, 012005(2019).

[2] A Heinrich. 3D Printing of Optical Components, vol. 233(2021).

[3] T Aderneuer, O Fernández, R Ferrini. Two-photon grayscale lithography for free-form micro-optical arrays. Opt. Exp., 29, 39511-39520(2021).

[4] A Toulouse, J Drozella, P Motzfeld, N Fahrbach, V Aslani, S Thiele, H Giessen, AM Herkommer. Ultra-compact 3D-printed wide-angle cameras realized by multi-aperture freeform optical design. Opt. Exp., 30, 707-720(2022).

[5] A Kubec, M-C Zdora, UT Sanli, A Diaz, J Vila-Comamala, C David. An achromatic X-ray lens. Nature Commun., 13, 1305(2022).

[6] T Blachowicz, G Ehrmann, A Ehrmann. Optical elements from 3D printed polymers. e-Polymers, 21, 549-565(2021).

[7] M Roulet, C Atkins, E Hugot, R Snell, B Van de Vorst, K Morris, M Marcos, I Todd, C Miller, J Dufils, S Farkas, G Mezo, F Tenegi, A Vega-Moreno, H Schnelter. Use of 3D printing in astronomical mirror fabrication. 3D Printed Optics and Additive Photonic Manufacturing II, vol. 11349, 33-44(2020).

[8] K Zhang, H Qu, H Guan, J Zhang, X Zhang, X Xie, L Yan, C Wang. Design and fabrication technology of metal mirrors based on additive manufacturing: a review. Appl. Sci., 11, 10630(2021).

[9] X Chen, W Liu, B Dong, J Lee, HOT Ware, HF Zhang, C Sun. High-speed 3D printing of millimeter-size customized aspheric imaging lenses with sub 7 nm Surface roughness. Adv. Mater., 30, 1705683(2018).

[10] M Delmans, J Haseloff. Cube: A framework for 3D printable optomechanics. J. Open Hardware, 2, 2(2018).

[11] B Diederich, R Lachmann, S Carlstedt, B Marsikova, H Wang, X Uwurukundo, AS Mosig, R Heintzmann. A versatile and customizable low-cost 3D-printed open standard for microscopic imaging. Nature Commun., 11, 5979(2020).

[12] A Elías-García, CA Hernandez-Martinez, R Esqueda-Almanza, A Rojas-Santana, I Sánchez-Osorio. Fast fabrication of optomechanical mounts using additive manufacturing. Optical Design and Fabrication 2021(2021).

[13] I Nuñez, T Matute, R Herrera, J Keymer, T Marzullo, T Rudge, F Federici. Low cost and open source multi-fluorescence imaging system for teaching and research in biology and bioengineering. PLoS ONE, 12, e0187163(2017).

[14] S Yang, Y Tang, YF Zhao. A new part consolidation method to embrace the design freedom of additive manufacturing. J.Manufac. Process., 20, 444-449(2015).

[15] A Alfaify, M Saleh, FM Abdullah, AM Al-Ahmari. Design for additive manufacturing: a systematic review. Sustainability, 12, 7936(2020).

[16] B Praveena, L Lokesh, A Buradi, N Santhosh, B Praveena, R Vignesh. A comprehensive review of emerging additive manufacturing (3D printing technology): Methods, materials, applications, challenges, trends and future potential. Mater. Today: Proc., 52, 1309-1313(2022).

[17] JT Collins, J Knapper, J Stirling, J Mduda, C Mkindi, V Mayagaya, GA Mwakajinga, PT Nyakyi, VL Sanga, D Carbery, L White, S Dale, ZJ Lim, JJ Baumberg, P Cicuta, S McDermott, B Vodenicharski, R Bowman. Robotic microscopy for everyone: The OpenFlexure microscope. Biomed. Opt. Exp., 11, 2447-2460(2020).

[18] F Rothermel, S Thiele, C Jung, H Giessen, A Herkommer. Towards magnetically actuated 3D-printed micro-optical elements. Optomechanics and Optical Alignment, 11816, 134-142(2021).

[19] F Kranert, M Hinkelmann, R Lachmayer, J Neumann, D Kracht. Function-integrated laser system based on 3D-printed optomechanics. Components and packaging for laser systems VIII, 11982, 98-104(2022).

[20] K Erdil, O Gürcüoğlu, O Ferhanoğlu. Electromagnetically actuated 3D-printed tunable optical slit device. Appl. Opt., 62, 5244-5250(2023).

[21] F Li, NP Macdonald, RM Guijt, MC Breadmore. Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing. Lab Chip., 19, 35-49(2019).

[22] AH Espera, JRC Dizon, Q Chen, RC Advincula. 3D-printing and advanced manufacturing for electronics. Prog. Add. Manuf., 4, 245-267(2019).

[23] R Hai, G Shao, HOT Ware, EH Jones, C Sun. 3D printing a low-cost miniature accommodating optical microscope. Adv. Mater., 35, 2208365(2023).

[24] P Pfuhl, M Degünther. Compensation of the position errors of optical elements by adapting their additively manufactured mounting structure. Opt. Instrum. Sci. Technol. Appl. II, Vol. 11876, 30-36(2021).

[25] KM Schwertz, JH Burge. Field guide to optomechanical design and analysis, vol. FG26(2012).

[26] P Yoder, D Vukobratovich. Opto-mechanical systems design: design and analysis of opto-mechanical assemblies, Vol. 1(2015).

[27] RE Fischer, B Tadic-Galeb, PR Yoder. Optical System Design(2008).

Patrick Pfuhl, Markus Degünther. Additively manufactured structures for precise and robust mounting of optical elements[J]. Journal of the European Optical Society-Rapid Publications, 2024, 20(1): 2024043
Download Citation