[1] WANG J M. Study on aspheric surface measurement using coordinate contour measuring machine ［D］. Suzhou:Soochow University, 2013. (in Chinese)
[2] LI SH Y. New Technology for Manufacturing and Measurement of Large and Middle-Scale Aspheric Surfaces ［M］. Beijing:Changsha:National Defend Industry Press ,2011. (in Chinese)
[3] LIN X J,WANG Z Q,SAN CH W. Method of probe radius compensation for free surface measurement by CMM ［J］. Aeronautical Manufacturing Techonglogy,2011(10):68-70,78. (in Chinese)
[4] QUAN R,WENG L.The influence of probe radius on the test data in three-coordinate measuring machine and its eliminating method ［J］. Acta Metrologica Sinica ,1993(4):251-255. (in Chinese)
[5] LIANG S R, LIN A C. Probe-radius compensation for 3D data points in reverse engineering ［J］. Computers in Industry, 2002, 48(3):241-251.
[6] MAYER J R R, MIR Y A, TROCHU F, et al.. Touch probe radius compensation for coordinate measurement using kriging interpolation ［J］. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 1997, 211(1):11-18.
[7] LIN Y C, SUN W I. Probe radius compensated by the multi-cross product method in freeform surface measurement with touch trigger probe CMM ［J］. The International Journal of Advanced Manufacturing Technology, 2003, 21(10):902-909.
[8] GUO Y B,GUO J,WANG ZH ZH. Study on measuring path and high-precision curve fitting algorithm for axisymmetric aspheric optics ［J］. China Mechanical Engineering, 2008, 19(10):1201-1204. (in Chinese)
[9] WANG H M. Compensation technology and application for probe radius of coordinate measuring machine ［J］. Technology and Test,2010(6):109-112,115. (in Chinese)
[11] XIE CH Y,CHEN SH K. A new method of the CMM probe radius compensation ［J］. Modular Machine Tool & Automatic Manufacturing Technique,2006(1):50-52.(in Chinese)
[12] YOU Y,WANG Q F, ZI ZH H. A test technique of surface shape aspheric optics parameters based on matlab ［J］. Infrared Technology, 2014(4):331-335.(in Chinese)
