[1] Ohyama T, Maruyama H. Traction and slip at higher rolling speeds: Some experiments under dry friction and water lubrication[C]. The 1st International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 1983: 395-418.
[2] Ohyama T. Tribological studies on adhesion phenomena between wheel and rail at high speeds[J]. Wear, 1991, 144(1-2): 263-275.
[3] Zhang W H, Chen J Z, Wu X J, et al.. Wheel/rail adhesion and analysis by using full scale roller rig[J]. Wear, 2002, 253(1-2): 82-88.
[4] Chen H, Ban T, Ishida M, et al.. Adhesion between rail/wheel under water lubricated contact[J]. Wear, 2002, 253(1-2): 75-81.
[5] Patir N, Cheng H S. An average flow model for determining effects of three- dimensional roughness on partial hydrodynamic lubrication[J]. J Lubri Technol Trans ASME, 1978, 100(1): 12-17.
[6] Chen H, Ishida M, Nakahara T. Analysis of adhesion under wet conditions for three- dimensional contact considering surface roughness[J]. Wear, 2005, 258(7-8): 1209-1216.
[7] Krupka I, Vrbka M,Hartl M. Effect of surface texturing on mixed lubricated non-conformal contacts[J]. Tribology International, 2008, 41(11): 1063-1073.
[8] Nanbu T, Yasuda Y, Ushijima K, et al.. Increase of traction coefficient due to surface micro texture[J]. Tribol Lett, 2008, 29(2): 105-118.
[9] Akbarzadeh S, Khonsari M M. On the prediction of running-in behavior in mixed-lubrication line contact[J]. J Tribol Trans ASME, 2010, 132(3): 032102.
[10] Akbarzadeh S, Khonsari M M. Experimental and theoretical investigation of running-in[J]. Tribology International, 2011, 44 (2): 92-100.
[11] Chen H, Ban T, Ishida M, et al.. Experimental investigation of influential factors on adhesion between wheel and rail under wet conditions[J]. Wear, 2008, 265(9-10): 1504-1511.
[12] Hu Y Z, Zhu D. A full numerical solution to the mixed lubrication in point contacts[J]. J Lubri Technol Trans ASME, 1999, 122(1): 1-9.
[13] Zhu X D, Hu Y Z. Effects of rough surface topography and orientation on the characteristics of EHD and mixed lubrication in both circular and elliptical contacts[J]. Tribol Trans, 2001, 44(3): 391-398.
[14] Zhu D. Effect of surface roughness on mixed EHD lubrication characteristics[J]. Tribol Trans, 2003, 46(1): 44-48.
[15] Lin Ziguang. Lasertex and tribologic design[J]. Journal of Machine Design, 2000, 17(4): 24-27.
[16] Zhan Jian, Yang Mingjiang, Wang Hongcai. Effect of YAG laser pulse waveform to laser etching crater morphology on cylinder wall [J]. Chinese J Lasers, 2011, 38(6): 0603032.
[17] Xing Xuhui, Li Zhengyang, Yang Mingjiang, et al.. Rolling wear properties of CL60 steel after pulsed Nd:YAG laser surface melting [J]. Chinese J Lasers, 2013, 40(3): 0303006.
[18] Wang Baoan, Cai Baochun, Yang Bing, et al.. Effect of laser dispersed melting on contact fatigue with Low slip ratio[J]. Applied Laser, 2014, 34(6): 518-523.
[20] Izhak Etsion. State of the art in laser surface texturing[J]. J Tribol Trans ASME, 127(1): 248-253.
[21] Deng Meng, Wang Yiqiang, Gu Yan, et al.. Microstructure and wear behaviour of laser hardened gray cast iron guideway[J]. Chinese J Lasers, 2014, 41(4): 0403009.
[22] Zhong Jinshan, Lu Jinzhong, Luo Kaiyu, et al.. Influence of laser shock processing on tensile properties and tribological behaviours of AISI304 stainless steel[J]. Chinese J Lasers, 2013, 40(5): 0503002.
[23] Evans C R, Johnson K L. Regimes of friction in elastohydrodynamic lubrication[J]. Proc IMechE, Part C: J Mech Eng Sci, 1986, 200(5): 313-324.
[24] Zhu D. On some aspects of numerical solutions of thin-film and mixed[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007, 221(5): 561-579.
[25] Timoshenko S P, Goodier J N. Theory of Elasticity[M]. New York: McGraw-Hill Colleye, 1970: 409-420.