[1] Antoun T,Seaman L,Curran D,et al.Spall fracture[M].New York :Springer,2002:3-4.

[2] HoPkinson B.A method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets[J].Philosophical Transactions of the Royal Society of London,1914,213(A):437-456.

[3] Davison Lee,Stevens A L.Continuum measures of spall damage [J].Journal of Applied Physics,1972,43(3):988-994.

[4] Seaman L,Curran D R,Shockey D A.Computational models for ductile and brittle fracture [J].Journal of Applied Physics,1976,47(11):4814-4826.

[5] Grady D E.The spall strength of condensed matter[J].J Mech Phys Solids,1988,36(3):353-384.

[6] Arad B,Moshe E,Eliezer S,et al.Spall strength measurements in aluminum,copper and metallic glass at strain rates of ~10 7 s-1[C]//AIP Conference Proceedings,1998,429(1):459-462.

[7] Armstrong R W,Walley S M.High strain rate properties of metals and alloys[J].International Materials Reviews,2008,53(3):105 -128.

[8] Razorenov S V,Kanel G I,Baumung K,et al.Hugoniot elastic limit and spall strength of aluminum and copper single crystals over a wide range of strain rates and temperatures[C]// AIP Conference Proceedings,2002,620(1):503-506.

[9] Kanel G.I,Razorenov S V,Bogatch A,et al.Spall fracture properties of aluminum and magnesium at high temperatures[J].Journal of Applied Physics,1996,79:8310-8317.

[10] Wagner S,Kahraman D,Kungl H,et al.Effect of temperature on grain size,phase composition,and electrical properties in the relaxor-ferroelectric-system Pb( Ni1/3Nb2/3)O3 - Pb( Zr,Ti )O3[J].Journal of Applied Physics,2005,98:024102.

[18] Shu Hua,Fu Sizu,Huang Xiuguang,et al.Plastic behavior of aluminum in high strain rate regime[J].Journal of Applied Physics,2014,116:033506.

[19] Kanel G I,Razorenov S V,Zaretsky E B,et al.Thermal “Softening” and “Hardening” of titanium and its alloy at high strain rates of shock-wave deforming[J].Physics of the Solid State,2003,45(4):656-661.

[20] Kumar A,Kumble R G.Viscous drag on dislocations at high strain rates in copper [J].Journal of Applied Physics,1969,40:3475-3480.

[21] Zaretsky E B,Kanel G I.Effect of temperature,strain,and strain rate on the flow stress of aluminum under shock-wave compression[J].Journal of Applied Physics,2012,112:073504.

[22] Trivedi P B,Asay J R,Gupta Y M,et al.Influence of grain size on the tensile response of aluminum under plate-impact loading[J].Journal of Applied Physics,2007,102:083513.

[23] Escobedo J P,Dennis-Koller D,Cerreta E K,et al.Effects of grain size and boundary structure on the dynamic tensile response of copper[J].Journal of Applied Physics,2011,110:033513.

[24] Pedrazas N A,Worthington D L,Dalton D A,et al.Effects of microstructure and composition on spall fracture in aluminum[J].Materials Science and Engineering A,2012,536:117-123.