Microstructure and Sealing Performance of Al2O3/Cu Brazed Joint

FAN Binbin; ZHAO Lin; XIE Zhipeng; KANG Dinghua; LIU Xihai

[7] LIU G H, ZHONG X Q, XING Y, et al. Surface resistivity and bonding strength of atmosphere plasma sprayed copper-coated alumina substrate［J］. Journal of the American Ceramic Society, 2021, 104(3): 1193-1197.

[8] KABAAR A B, BUTTAY C, DEZELLUS O, et al. Characterization of materials and their interfaces in a direct bonded copper substrate for power electronics applications［J］. Microelectronics Reliability, 2017, 79: 288-296.

[11] YANG S H, KANG S. Fracture behavior and reliability of brazed alumina joints via Mo-Mn process and active metal brazing［J］. Journal of Materials Research, 2000, 15(10): 2238-2243.

[13] ZHANG J, HE Y M, SUN Y, et al. Microstructure evolution of Si3N4/Si3N4 joint brazed with Ag-Cu-Ti+SiCp composite filler［J］. Ceramics International, 2010, 36(4): 1397-1404.

[15] WANG L, KANG W T, GAO P Z, et al. Influence of ceramic substrate porosity and glass phase content on the microstructure and mechanical properties of metallized ceramics via an activated Mo-Mn method［J］. Ceramics International, 2020, 46(6): 8244-8254.

[16] ALI M, KNOWLES K M, MALLINSON P M, et al. Microstructural evolution and characterisation of interfacial phases in Al2O3/Ag-Cu-Ti/Al2O3 braze joints［J］. Acta Materialia, 2015, 96: 143-158.

[17] LIN K L, SINGH M, ASTHANA R. Interfacial characterization of alumina-to-alumina joints fabricated using silver-copper-titanium interlayers［J］. Materials Characterization, 2014, 90: 40-51.

[18] ALI M, KNOWLES K M, MALLINSON P M, et al. Interfacial reactions between sapphire and Ag-Cu-Ti-based active braze alloys［J］. Acta Materialia, 2016, 103: 859-869.

[19] QIU Q W, WANG Y, YANG Z W, et al. Microstructure and mechanical properties of Al2O3 ceramic and Ti6Al4V alloy joint brazed with inactive Ag-Cu and Ag-Cu+B［J］. Journal of the European Ceramic Society, 2016, 36(8): 2067-2074.

[20] ANWAR S, ANWAR S, NAYAK P. Multilayer composite ceramic-metal thin film: structural and mechanical properties［J］. Surfaces and Interfaces, 2018, 10: 110-116.

[21] KUO D H, YEH K T, SHIUE R K, et al. Microstructural characterizations of the 316 stainless steel-alumina joining by a modified moly-manganese process and brazing［J］. Advanced Materials Research, 2011, 189/190/191/192/193: 3339-3344.