[1] Lowdermilk W H. Status of the National Ignition Facility project[C]. SPIE, 1996, 3047:16-37.
[2] Li Yangshuai, Zhu Jianqiang, Pang Xiangyang, et al. Numerical simulation of debris removal trajectories on transport mirrors in high power laser system[J]. Chinese J Lasers, 2015, 42(1): 0102010.
[3] Horvath J A. NIF/LMJ prototype amplifier mechanical design[R]. California: LLNL, 1996.
[4] Yu Haiwu, Zheng Wanguo, Tang Jun, et al. Investigation of slab cavity cleanliness of high power laser amplifiers [J]. High Power Laser and Particle Beams, 2001, 13(3): 272-276.
[5] Stowers I F, Horvath J A, Menapace J A, et al. Achieving and maintaining cleanliness in NIF amplifier[R]. California: LLNL, 1998.
[6] Cheng Xiaofeng, Wang Hongbin, Miao Xinxiang, et al. Contamination control for high-power solid-state laser driver and improvement of cleanliness in slab amplifiers[J]. High Power Laser and Particle Beams, 2013, 25(5): 1147-1151.
[7] Ren Z Y, Zhu J Q. Evaluation method of thermal recovery uniformity for high energy amplifier[C]. SPIE, 2012, 8551: 855109.
[8] Ren Z Y, Zhu J Q, Liu Z G, et al. Analysis of convective heat transfer coefficient for SG II prototype[J]. Chinese Optics Letters, 2012, 10(s2): s21410.
[9] Ren Z Y, Zhu J Q, Huang H B, et al. Numerical research and optimization of convective heat transfer for multi-segment amplifiers[J]. Optics & Laser Technology, 2013, 47: 189-193.
[10] Li Yanju, Wu Jinhui, Zhang Jinming, et al. Application of CFD in airflow study for biosafety laboratories[J]. Contamination Control & Air-conditioning Technology, 2007, 1: 15-17.
[11] Geng Wenqing, Ma Zonghu, Shang Hong, et al. Influence of BSL-3 laboratory ventilation pattern and location of contaminant source on distribution of aerosol particles by numerical method[J]. Chinese Medical Equipment Journal, 2011, 32(1): 7-11.
[12] Zhao Minqi. Numerical simulation of air distribution mode and optimization on biological safety cabinet[D]. Shanghai: Donghua University, 2006.
[13] Jiang Shengnan. The simulation and analysis of airflow in biological safety cabinet[D]. Shanghai: Donghua University, 2008.
[14] Meng shaoxian. Amplified medium surface damage induced by particulate in high power laser systems[J]. Laser & Optoelectronics Progress, 2000, 37(8): 28-31.
[15] Xu Zhonglin, Zhang Yizhao, Zhang Yangguo, et al. Discussion on the place of supply air outlet and return air inlet in biosafety laboratories[J]. Contamination Control & Air-conditioning Technology, 2005, 4: 15-20.
