Research on the Method of Determining the Optical Axis Based on Equivalent Nodal Point Theory

Zhiying LIU; Guiyuan JIA; Tianxiang QIN; Yunhan HUANG; Han ZHANG

doi:10.3788/gzxb20215009.0912004

[1] Daoyin YU, Hengying TAN. Engineering optics, 27(2016).

[2] Xiarui GUO, Zhibo LIAO, Chunyu WANG等. Aberration and alignment quality investigation of space transmission optical system with centering error of optical axes. Infrared and Laser Engineering, 41, 436-441(2012).

[3] H J PARK, S W LEE, D S LEE. Computer aided measurement and compensation system for focal length of lenses in camera manufacture based on the MTF performance using the line CCD sensor. International Journal of Machine Tools and Manufacture, 40, 1493-1511(2000).

[4] Zijian LIU, Guangwei YI. Research on alignment of coaxial optical system based on global optimization alignment method. Journal of Hunan University （Natural Sciences）, 45, 42-52(2018).

[5] Danhui XU, Xiahui TANG, Guoming FANG等. Method for calibration of optical axis parallelism based on interference fringes. Acta Optica Sinica, 40, 1712005(2020).

[6] Yang DU, Zhishan GAO. Lens centering using high-precision three coordinate measuring machine. Optics and Precision Engineering, 23, 639-644(2015).

[7] Zhibin CHEN, Wenjian XIAO, Dongxi MA等. A method for large distance multi-optical axis parallelism online detection. Acta Optica Sinica, 37(2017).

[8] Zhijian WANG, Peng WANG, Quan LIU. Dynamic optics, 19-22(2015).

[9] Zhiying LIU, Yulong SONG, Yuegang FU等. Tolerance analysis of stitching system based on equivalent nodal point. Acta Photonica Sinica, 40, 1261-1265(2011).

[10] Liude TIAN, Zhaohui LIU, Jianke ZHAO等. Analysis the influence of pyramidal error on the encoder accuracy test by using coordinate transformation. Acta Optica Sinica, 35(2015).

[11] Guifang QIAO, Dalin SUN, Guangming SONG等. A rapid coordinate transformation method for serial robot calibration system. Journal of Mechanical Engineering, 56, 1-8(2020).

[12] Guoying SU, Fumin ZHANG, Yong HAN等. Coaxiality error measurement technology for GNSS antenna connector. Acta Photonica Sinica, 49(2020).

[13] Lizhi XU, Changxiang YAN, yi LI等. Image motion calculation and error distribution for aerial whisk-broom imaging. Optics and Precision Engineering, 27, 2071-2079(2019).

[14] Changming LU, Xin GAO, Xiyu LI等. A method for evaluating medium and high-earth orbit object telescope's precision by Beidou's precise ephemeris. Acta Photonica Sinica, 49, 1012001(2020).

[15] Hengxiang ZHAO, Libo LI, Yutao FENG等. Techniques for on-orbit calibration of space optical imaging systems based on auto-collimation. Acta Photonica Sinica, 50(2021).

[16] Xiaokai MU, Qingchao SUN, Kepeng SUN等. Three-dimensional tolerance modeling and precision analysis of flexible body based on the assembly load. Journal of Mechanical Engineering, 54, 39-48(2018).

[17] Zhaoqiang WU. Stimulated tolerances modeling based on small displacement torsors and tolerances analysis. Machinery Design & Manufacture, 205-207(2010).