[2] Breede F, Hofmann S, Jain N, et al. Design, manufacture, and characterization of a carbon fiber-reinforced silicon carbide nozzle extension［J］. Int. J. Appl. Ceram. Technol., 2016, 13(1): 3-16.
[3] Zhao G L, Huang C Z, He N, et al. Preparation and cutting performance of reactively hot pressed TiB2-SiC ceramic tool when machining Invar36 alloy［J］. Int. J. Adv. Manuf. Technol., 2016, 86: 2679-2688.
[7] Wang H J, Lin H T, Wang C Y, et al. Laser drilling of structural ceramics—A review［J］. J. Eur. Ceram. Soc., 2017, 37(4): 1157-1173.
[8] Kim S H, Balasubramani T, Sohn I B, et al. Precision microfabrication of AlN and Al2O3 ceramics by femtosecond laser ablation［J］. Proc. of SPIE, 2008, 6879: 68791O.
[9] Ren N F, Xia K B, Yang H Y, et al. Water-assisted femtosecond laser drilling of alumina ceramics［J］. Ceramics International, 2021, 47(8): 11465-11473.
[10] Zhang Y, Wang Y Q, Zhang J Z, et al. Micromachining features of TiC ceramic by femtosecond pulsed laser［J］. Ceram. Int., 2015, 41(5): 6525-6533.
[11] Lee H M, Choi J H, Moon S J. Determining the machining parameters for femtosecond laser helical drilling of aluminosilicate glass substrate［J］. Int. J. Precis. Eng. Manuf., 2017, 18(7): 923-930.
[12] Liu Y S, Wang C H, Li W N, et al. Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser［J］. J. Mater. Process. Tech., 2014, 214(12): 3131-3140.
[13] Sankaranarayanan S, Emminger H, Kar A. Energy loss in the plasma during laser drilling［J］. J. Phys. D: Appl. Phys., 1999, 32: 1605-1611.
[14] Liu Y S, Wang J, Li W N, et al. Effect of energy density and feeding speed on micro-holes drilling in SiC/SiC composites by picosecond laser［J］. Int. J. Adv. Manuf. Technol., 2016, 84: 1917-1925.
[15] Fornaroli C, Holtkamp J, Gillner A. Laser-beam helical drilling of high quality micro holes［J］. Phys. Proc., 2013, 41: 661-669.
[16] Wang H J, Chen Q, Lin D T, et al. Effect of scanning pitch on nanosecond laser micro-drilling of silicon nitride ceramic［J］. Ceram. Int., 2018, 44(12): 14925-14928.
[17] Wu B, Tao S, Lei S. The interactions of microhole sidewall with plasma induced by femtosecond laser ablation in high-aspect-ratio microholes［J］. J. Manuf. Sci. Eng., 2012, 134: 011007.
[18] Shigematsu I, Kanayama K, Tsuge A, et al. Analysis of constituents generated with laser machining of Si3N4 and SiC［J］. J. Mater. Sci. Lett., 1998, 17: 737-739.
