Influence of Loop Gain on Measurement Accuracy of Fiber Optical Current Transformer

Yu Jia; Zhang Chunxi; Wang Xiaxiao; Li Chuansheng; Zhang Yuning

doi:10.3788/cjl201643.0910002

[1] Ziegler S, Woodward R C, Iu H C, et al. Current sensing techniques: A review[J]. IEEE Sensors Journal, 2009, 9(4): 354-376.

[2] Ortiz V H, Flores J L, Garcia-Torales G. A review on optical current transducers for power system metering[C]. SPIE, 2007, 6770: 677018.

[3] Wang Zhi, Chu Fenghong. Research advances in optical fiber current sensor technology[J]. Laser & Optoelectronics Progress, 2014, 51(10): 100002.

[4] Fan Yan′en, Wu Shuai, He Shengnan, et al. Research on current sensing technology using fiber Bragg grating demodulated by fiber Michelson interferometer[J]. Laser & Optoelectronics Progress, 2015, 52(8): 080602.

[5] Li Chuansheng, Zhang Chunxi, Wang Xiaxiao, et al. Key techniques of reflective Sagnac interferometer-type fiber optic current transformers[J]. Automation of Electric Power Systems, 2013, 37(12): 104-127.

[6] Wang Zhi, Chu Fenghong, Wu Jianping.Progress in all-fiber current sensor temperature compensation[J]. Laser & Optoelectronics Progress, 2014, 51(12): 120005.

[7] Li Xuyou, Hao Jinhui, Yang Hanrui, et al. Research on the compensating fiber loop for eliminating vibration in Sagnac optic current sensor[J]. Chinese J Lasers, 2012, 39(2): 0205005.

[8] Niewczas P, Madden W I, Michie W C, et al. Magnetic crosstalk compensation for an optical current transducer[J]. IEEE Transactions on Instrumentation and Measurement, 2001, 50(5): 1071-1075.

[9] GB/T 20840. 8-2007[S]. Transformer Part 8: Electronic Current Transformer, 2007.

[10] Zhang Chaoyang, Zhang Chunxi, Wang Xiaxiao, et al. Frequency characteristics of reflecting fiber-optic current transducer[J]. Opto-Electronic Engineering, 2007, 34(7): 88-92.

[11] Wang Xiaxiao, Wang Ye, Wang Xichen, et al. Experimental research on dynamic characteristics of fiber optical current transformer[J]. Power System Protection and Control, 2014, 42(3): 9-13.

[12] Li Chuansheng, Zhang Chaoyang, Sun Haijiang, et al. Effect of polarization crosstalk of polarization-maintaining delay optical fiber coil on the fiber-optic current sensor[J]. Chinese J Lasers, 2014, 41(11): 1105008.

[13] Gao Jinzhan. Weak signal detection[M]. Beijing: Tsinghua University Press, 2011: 171-182.

[14] Zhang Xi, Zhang Chunxi, Du Xinzheng. Design of digital lock-in amplifier in fiber optic gyroscope[J]. Journal of Chinese Inertial Technology, 2001, 9(4): 70-73.

[15] Han Junliang, Ge Shengmin, Shen Yi. Research on modeling and simulation of digital closed-loop FOG[J]. Journal of System Simulation, 2008, 20(4): 833-836, 838.

[16] Wang Xichen. Study of small signal errors in optic fiber current sensor[D]. Beijing: Beihang University, 2013: 21-30.

[17] Wang Xiaxiao, Zhang Meng, Li Chuansheng, et al. Research on dynamic model of digital closed-loop fiber optic gyroscope[J]. Chinese J Lasers, 2013, 40(2): 0205002.

[18] Paviath G A. Closed-loop fiber optic gyros[C]. SPIE, 1996, 2837: 46-60.

[19] Zhang Chaoyang, Zhang Chunxi, Wang Xiaxiao, et al. Influence of SLD′s power attenuation on scale factor of closed-loop fiber optic current transformer[J]. Acta Photonica Sinica, 2007, 37(12): 2458-2461.