[1] GONALVES H M R, DUARTEB A J, ESTEVES da SILVA J C G. Optical fiber sensor for Hg (II) based on carbon dots ［J］. Biosensors and Bioelectronics, 2010, 26: 1302-1306.
[2] PERROTTON C, JAVAHIRALY N, Slaman M, et al.. Fiber optic surface plasmon resonance sensor based on wavelength modulation for hydrogen sensing ［J］. Optics Express, 2011, 19(23): A1175-A1183.
[3] ZHAO M F, ZHONG N B, LUO B B, et al.. Optical fiber attenuated total reflection sensor for on-line measurement of biomass concentration ［J］. Opt. Precision Eng., 2010, 18(8): 1707-1714. (in Chinese)
[4] GONG Y, GUO Y, RAO Y J, et al.. Fiber-optic Fabry-Pérot sensor based on periodic focusing effect of graded-index multimode fibers ［J］. IEEE Photonics Technology Letters, 2010, 22(23): 1708-1710.
[5] QUERO G, CRESCITELLI A, PALADINO D, et al.. Evanescent wave long-period fiber grating within D-shaped optical fibers for high sensitivity refractive index detection ［J］. Sensors and Actuators B: Chemical, 2011,2(152): 196-205.
[7] CORRES J M, MATIAS I R, BRAVO J, et al.. Tapered optical fiber biosensor for the detection of anti-gliadin antibodies ［J］. Sensors and Actuators B: Chemical, 2008,1(135): 166-171.
[8] MACHAVARAM V R, BADCOCK R A, FERNANDO G F. Fabrication of intrinsic fibre Fabry-Perot sensors in silica fibres using hydrofluoric acid etching ［J］. Sens. Actuators A, 2007, 138: 248-260.
[9] LU P, MEN L Q, CHEN Q Y. Polymer-coated fiber Bragg grating sensors for simultaneous monitoring of soluble analytes and temperature ［J］. Sensors Journal, IEEE, 2009, 4(9): 340-345.
[10] GEHRIG S M, KOOPMAN R, NAIM T, et al.. Making fast-twitch dystrophic muscles bigger protects them from contraction injury and attenuates the dystrophic pathology ［J］. The American Journal of Pathology, 2010,176(1): 29-33.
[11] ZHONG N B, LIAO Q, WANG Y Z, et al.. High-quality fiber fabrication in buffered HF solution with ultrasonic agitation ［J］. Applied Optics, 2013,6(52): 1432-1440.
[12] SCHWARTZ B, ROBBINS H. Chemical etching of silicon 4. etching technology ［J］. Journal of the Electrochemical Society, 1976, 12(123): 1903-1909.
[13] BARANSKI M, ALBERO J, GORECKI C. A numerical model of wet isotropic etching of silicon molds for microlenses fabrication ［J］. Journal of the Electrochemical Society, 2011, 11(158): D681-D688.
[14] SCHIMMEL D G. Comparison of chemical etches for revealing (100) silicon crystal defects ［J］. Journal of the Electrochemical Society, 1976, 5(123): 734-741.
[15] JOHN J P, CDONALD J. Spray etching of silicon in the HNO3/HF/H2O system ［J］. Journal of the Electrochemical Society, 1993, 9(140): 2622-2625.
[16] LIPPOLD M, PATZIG-KLEIN S, KROKE E. HF-HNO(3)-H(2)SO(4)/H(2)O mixtures for etching multicrystalline silicon surfaces: formation of NO(2)(+), reaction rates and surface morphologies ［J］. Zeitschrift Fur Naturforschung Section B-A Journal of Chemical Sciences, 2011, 2(66): 155-163.
[17] MACKAY R E, LIONIS N, LE H R. 3D surface topography and reflectivity of anisotropic etched silicon micromirrors for BioMEMS ［J］. Microsyst Technol., 2011, (17): 1763-1770.
[18] MILIND S K, HENRY F E. Acid-based etching of silicon wafers: mass-transfer and kinetic effects ［J］. Journal of the Electrochemical Society, 2000, 1(147): 176-188.
[19] LEE M T. Reaction of high-silica optical fibers with hydrofluoric acid ［J］. J. Am. Cer. Soc., 1984,67: C21-C22.
[20] LI L, XIAO Z Y, ZHANG ZH B, et al.. Mass transfer kinetics of pervaporation by using composite silicone rubber membrane (I): convective transport on membrane surface ［J］. Journal of Chemical Industry and Engineering (China), 2002,11(53): 1169-1174.(in Chinese)
[21] OSSEO-ASARE K. Surface chemical processes in chemical mechanical polishing ［J］. J. Electrochem. Soc., 2002,12(149): G651-G655.
