[1] Li Wenyin. Characterization of signal transfer performance of a through glass via (TGV) substrate with silicon vertical feedthroughs[J]. Microelectronic Engin., 2016(165): 52-56.
[2] Ryu S K, Lu K H, Zhang Xuefeng, et al. Impact of near-surface thermal stresses on interfacial reliability of through-silicon vias for 3-D interconnects[J]. Trans. on Device and Materials Reliability, 2011, 11(1): 35-43.
[3] Lee S W, Lee S K, Park J H. High-density through-wafer copper via array in insulating glass mold using reflow process[J]. Jap. J. of Appl. Phys., 2015, 54(4): 047202.
[4] Kuang Yunbin, Xiao Dingbang, Zhou Jian, et al. Theoretical model of glass reflow process for through glass via (TGV) wafer fabrication[J]. J. of Micromechanics and Microengin., 2018, 28(9): 095004.
[5] Wensink H, Berenschot J W, Jansen H V, et al. High resolution powder blast micromaching[C]// Proc. of IEEE Thirteenth Annual Inter. Conf. on Micro Electro Mechanical Systems, 2000: 769-774.
[6] Diepold T, Obermeier E. Smoothing of ultrasonically drilled holes in borosilicate glass by wet chemical etching[J]. J. of Micromechanics and Microeng.,1996, 6(1): 29-32.
[7] Fascio V, Wuthrich R, Viquerat D, et al. 3D microstructuring of glass using electrochemical discharge machining (ECDM)[C]// Proc. of 1999 Inter. Symp. on Micromechatronics and Human Science, 1999: 179-183.
[8] Abe T, Li Xinghua, Esashi M. Endpoint detectable plating through femtosecond laser drilled glass wafers for electrical interconnections[J]. Sensor and Actuators A: Physical, 2003, 108(1/3): 234-238.
[9] Li Xinghua, Abe T, Esashi M. Deep reactive ion etching of Pyrex glass using SF6 plasma[J]. Sensor and Actuators A: Physical, 2001, 8(3): 139-145.
[10] Haque R M, Wise K D. A glass-in-silicon reflow process for three-dimensional microsystems[J]. J. of Microelectromechanical Systems, 2013, 22(6): 1470-1477.
[11] Jin J Y, Yoo S, Yoo B W, et al. Characterisation of silicon through-vias for wafer-level interconnection with glass reflows[J]. Electron. Lett., 2012, 48(21): 1354-1355.
