Research on Suppression Strategy of Plane Distortion in Laser Bending Forming of Specialty‑Shaped Corrugated Sheet

Zhehe Yao; Jinyuan Hong; Weixin Fan; Yunfeng Liu; Deqing Mei; Jianhua Yao

doi:10.3788/CJL230533

[1] Zhou W, Li X Y, Zhong Y C et al. Research progress of methanol steam reforming microreactors for hydrogen production[J]. Journal of Xiamen University (Natural Science), 60, 598-613(2021).

[2] Li J L. Nanostructure control and transfer characteristics enhancement of proton transport channels in proton exchange membranes[D](2022).

[3] Hua R S, Zhang W Q, Cheng L D et al. Review on design and forming technology of metallic bipolar plates for fuel cells[J]. Journal of Netshape Forming Engineering, 14, 25-33(2022).

[4] Zhou W, Yu W, Pei P C et al. Performances of a methanol reforming microreactor with gradient porosity fiber support for hydrogen production[J]. Journal of Automotive Safety and Energy, 9, 85-92(2018).

[5] Zhang X L. Study on heat and mass transfer characteristics of heat exchanger surface with special-shaped channel[D](2017).

[6] Khatir F A, Elyasi M, Ghadikolaee H T et al. Evaluation of effective parameters on stamping of metallic bipolar plates[C], 322-329.

[7] Guo Y K, Shi Y J, Wang X G et al. An analytical model of laser bending angle under preload[J]. The International Journal of Advanced Manufacturing Technology, 108, 2569-2577(2020).

[8] Ding L, Liu H X, Wang H J et al. Experimental study of thin aluminum-lithium alloy sheet metal laser forming with semiconductor laser[J]. Chinese Journal of Lasers, 37, 2143-2148(2010).

[9] Chi S S, Wang X Y, Xu W J. Numerical simulation on stainless steel-carbon steel laminated sheet considering interface during pulsed laser bending[J]. Chinese Journal of Lasers, 41, 1103002(2014).

[10] Vollertsen F, Komel I, Kals R. The laser bending of steel foils for microparts by the buckling mechanism-a model[J]. Modelling and Simulation in Materials Science and Engineering, 3, 107-119(1995).

[11] Woizeschke P. Approach for bidirectional laser bending of sheet metal with one-sided accessibility[J]. CIRP Annals, 68, 277-280(2019).

[12] Zhang B Y, Lu X F, Zhang L Y et al. Analysis of complex warping deformation for cold-rolled strip[J]. Journal of Mechanical Engineering, 54, 184-192(2018).

[13] Wang X G, Shi Y J, Guo Y K et al. Laser bending and edge effect control of laminated metal composite plate[J]. Chinese Journal of Lasers, 47, 0302004(2020).

[14] Shi Y J, Zhang C, Sun G D et al. Study on reducing edge effects by using assistant force in laser forming[J]. Journal of Materials Processing Technology, 227, 169-177(2016).

[15] Shen H, Hu J, Yao Z Q. Analysis and control of edge effects in laser bending[J]. Optics and Lasers in Engineering, 48, 305-315(2010).

[16] Zhang Y J, Dong W B, Yang T Y et al. Edge effect reduction in laser bending of DP980 high-strength steel[J]. The International Journal of Advanced Manufacturing Technology, 119, 1965-1973(2022).

[17] Li Z H. Numerical simulation and technological basis of laser bending of stainless steel-carbon steel laminates[D](2020).

[18] Gu J Y, Yan C J, Zhang C C et al. Study on error compensation for laser bending of single-curved surface[J]. Chinese Journal of Lasers, 48, 1002108(2021).

[19] Wang G F, Wang X Y, Wang H J. Analysis of curved surface deformation in laser circular scanning of rectangular metal laminated plates[J]. Infrared and Laser Engineering, 48, 149-156(2019).

[20] Shi Y J, Yao Z Q, Shen H et al. Research on the mechanisms of laser forming for the metal plate[J]. International Journal of Machine Tools and Manufacture, 46, 1689-1697(2006).

[21] Hu L L, Zhou J Z, Yang X D et al. Numerical simulation of laser bending of Al2O3 ceramic slice[J]. Chinese Journal of Lasers, 37, 1631-1635(2010).

[22] Li Z H, Wang X Y. Numerical simulation of warping deformation on laminated plate during reciprocating laser bending[J]. Infrared and Laser Engineering, 47, 56-63(2018).

[23] Yang K. Experimental study and numerical simulation of laser bending for 304 stainless steel[D](2014).

[24] Arnet H, Vollertsen F. Extending laser bending for the generation of convex shapes[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 209, 433-442(1995).

[25] Geiger M, Vollertsen F. The mechanisms of laser forming[J]. CIRP Annals, 42, 301-304(1993).