[1] CHEN Z W, LI Z Y, LI J J, et al. 3D printing of ceramics: a review［J］. Journal of the European Ceramic Society, 2019, 39(4): 661-687.
[2] BAI X J, DING G J, ZHANG K Q, et al. Stereolithography additive manufacturing and sintering approaches of SiC ceramics［J］. Open Ceramics, 2021.
[3] LI W, CUI C C, BAO J X, et al. Properties regulation of SiC ceramics prepared via stereolithography combined with reactive melt infiltration techniques［J］. Ceramics International, 2021, 47(24): 33997-34004.
[4] DURIF C, FRMDER C, AFFOLTER C, et al. Aquacasting: a new shaping concept for water based reactive tape casting［J］. Journal of the European Ceramic Society, 2015, 35(13): 3633-3640.
[7] LI T, CHEN H D, ZHANG Y B, et al. A comprehensive evaluation of vat-photopolymerization resins and alumina slurries for ceramic stereolithography［J］. Ceramics International, 2022
[8] LASGORCEIX M, CHAMPION E, CHARTIER T. Shaping by microstereolithography and sintering of macro-micro-porous silicon substituted hydroxyapatite［J］. Journal of the European Ceramic Society, 2016, 36(4): 1091-1101.
[9] ZANCHETTA E, CATTALDO M, FRANCHIN G, et al. Stereolithography of SiOC ceramic microcomponents［J］. Advanced Materials, 2016, 28(2): 370-376.
[10] LI K H, ZHAO Z. The effect of the surfactants on the formulation of UV-curable SLA alumina suspension［J］. Ceramics International, 2017, 43(6): 4761-4767.
[11] LI X Y, HU K H, LU Z G. Effect of light attenuation on polymerization of ceramic suspensions for stereolithography［J］. Journal of the European Ceramic Society, 2019, 39(7): 2503-2509.
