[1] Liu L M, Xu H F, Xiao J K et al. Effect of heat treatment on structure and property evolutions of atmospheric plasma sprayed NiCrBSi coatings[J]. Surface and Coatings Technology, 325, 548-554(2017). http://www.sciencedirect.com/science/article/pii/S0257897217306989
[2] Liu L M, Xiao J K, Wei X L et al. Effects of temperature and atmosphere on microstructure and tribological properties of plasma sprayed FeCrBSi coatings[J]. Journal of Alloys and Compounds, 753, 586-594(2018). http://www.sciencedirect.com/science/article/pii/S0925838818315706
[3] Johansson S, Frennfelt C, Killinger A et al. Frictional evaluation of thermally sprayed coatings applied on the cylinder liner of a heavy duty diesel engine: pilot tribometer analysis and full scale engine test[J]. Wear, 273, 82-92(2011). http://www.sciencedirect.com/science/article/pii/S0043164811004765
[4] Fu X S, Yao W Z, Zhang L H et al[J]. The current status and development trend of additives in lubricating oils Automobile Technology & Material, 2005, 1-6.
[5] Li S, Qin H J, Zuo R F et al. Tribological performance of Mg/Al/Ce layered double hydroxides nanoparticles and intercalated products as lubricant additives[J]. Applied Surface Science, 353, 643-650(2015). http://www.sciencedirect.com/science/article/pii/S0169433215012106
[6] Li S, Qin H J, Zuo R F et al. Friction properties of La-doped Mg/Al layered double hydroxide and intercalated product as lubricant additives[J]. Tribology International, 91, 60-66(2015). http://www.sciencedirect.com/science/article/pii/S0301679X15002509
[7] Aucélio R Q, de Souza R M, de Campos R C et al. . The determination of trace metals in lubricating oils by atomic spectrometry[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 62, 952-961(2007). http://www.sciencedirect.com/science/article/pii/S0584854707001528
[8] Zmozinski A V, de Jesus A, Vale M G R et al. . Determination of calcium, magnesium and zinc in lubricating oils by flame atomic absorption spectrometry using a three-component solution[J]. Talanta, 83, 637-643(2010). http://europepmc.org/abstract/MED/21111185
[9] Zali M A. Ahmad W K W, Retnam A, et al. Concentration of heavy metals in virgin, used, recovered and waste oil: a spectroscopic study[J]. Procedia Environmental Sciences, 30, 201-204(2015).
[10] Duyck C, Miekeley N. Portoda Silveira C L, et al. Trace element determination in crude oil and its fractions by inductively coupled plasma mass spectrometry using ultrasonic nebulization of toluene solutions[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 57, 1979-1990(2002).
[11] He Y M, Zhao F F, Zhou Y et al. Extraction induced by emulsion breaking as a tool for simultaneous multi-element determination in used lubricating oils by ICP-MS[J]. Analytical Methods, 7, 4493-4501(2015).
[12] Mello P A. Pereira J S F, Mesko M F, et al. Sample preparation methods for subsequent determination of metals and non-metals in crude oil: a review[J]. Analytica Chimica Acta, 746, 15-36(2012).
[13] Zheng P C, Liu H D, Wang J M et al. Online mercury determination by laser-induced breakdown spectroscopy with the assistance of solution cathode glow discharge[J]. Journal of Analytical Atomic Spectrometry, 30, 867-874(2015).
[14] Wang J M, Zheng P C, Liu H D et al. Classification of Chinese tea leaves using laser-induced breakdown spectroscopy combined with the discriminant analysis method[J]. Analytical Methods, 8, 3204-3209(2016). http://pubs.rsc.org/-/content/articlepdf/2016/ay/c5ay03260a
[15] Guo Y M, Deng L M, Yang X Y et al. Wavelet-based interference correction for laser-induced breakdown spectroscopy[J]. Journal of Analytical Atomic Spectrometry, 32, 2401-2406(2017). http://pubs.rsc.org/en/content/articlepdf/2017/ja/c7ja00204a
[16] Zhu Z H, Li J M, Guo Y M et al. Accuracy improvement of boron by molecular emission with a genetic algorithm and partial least squares regression model in laser-induced breakdown spectroscopy[J]. Journal of Analytical Atomic Spectrometry, 33, 205-209(2018). http://pubs.rsc.org/en/content/articlelanding/2017/ja/c7ja00356k
[17] Jia J W, Fu H B, Wang H D et al. Improvement of beam shape modification on stability of laser induced breakdown spectroscopy[J]. Chinese Journal of Lasers, 46, 0311004(2019).
[18] Fichet P, Mauchien P, Wagner J F et al. Quantitative elemental determination in water and oil by laser induced breakdown spectroscopy[J]. Analytica Chimica Acta, 429, 269-278(2001). http://www.sciencedirect.com/science/article/pii/S0003267000012770
[19] Yaroshchyk P. Morrison R J S, Body D, et al. Quantitative determination of wear metals in engine oils using laser-induced breakdown spectroscopy: a comparison between liquid jets and static liquids[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 60, 986-992(2005).
[20] Xiu J S, Bai X S, Motto-Ros V et al. Characteristics of indirect laser-induced plasma from a thin film of oil on a metallic substrate[J]. Frontiers of Physics, 10, 231-239(2015). http://d.wanfangdata.com.cn/Periodical_zggdxxxswx-wlx201502012.aspx
[21] Xiu J S, Liu Y Y, Dong L L et al. The detection of trace wear elements in engine oil using indirect ablation-laser induced breakdown spectroscopy[J]. Spectroscopy and Spectral Analysis, 37, 2885-2890(2017).
[22] Wang J M, Xue S W, Zheng P C et al. Determination of lead and copper in ligusticum wallichii by laser-induced breakdown spectroscopy[J]. Analytical Letters, 50, 2000-2011(2017). http://www.tandfonline.com/doi/ref/10.1080/00032719.2016.1254223
[23] Wang J, Shi M, Zheng P et al. Quantitative analysis of Ca, Mg, and K in the roots of angelica pubescens f. biserrata by laser-induced breakdown spectroscopy combined with artificial neural networks[J]. Journal of Applied Spectroscopy, 85, 190-196(2018).
[24] Wang J M, Yan H Y, Zheng P C et al. Quantitative detection of nutrient elements in soil based on laser induced breakdown spectroscopy[J]. Chinese Journal of Lasers, 44, 1111002(2017).