[1] Barrau E, Riviere N, Poupot C, et al. Single and double optical probes in air-water two-phase flows : real time signal processing and sensor performance[J]. Inter. J. of Multiphase Flow, 1999, 25(2): 229-256.
[2] Yazdian F, Shojaosadati S, Nosrati M, et al. Study of geometry and operational conditions on mixing time, gas hold up, mass transfer, flow regime and biomass production from natural gas in a horizontal tubular loop bioreactor[J]. Chemical Engineering Science, 2009, 64(3): 540-547.
[3] Boden S, Bieberle M, Hampel U, et al. Quantitative measurement of gas hold-up distribution in a stirred chemical reactor using X-ray cone-beam computed tomography[J]. Chemical Engineering J., 2008, 139(2): 351-362.
[4] Kosugi S, Niwa K, Saito T, et al. Design factors in gas-lift advanced dissolution (GLAD) system for CO2 sequestration into the ocean[J]. Chemical Engineering Science, 2001, 56(21): 6205-6210.
[9] Jii V, Vee M, Orvalho S, et al. Measurement accuracy of a mono-fiber optical probe in a bubbly flow[J]. Inter. J. of Multiphase Flow, 2010, 36(7): 533-548.
[10] Yamada M, Saito T. A newly developed photoelectric optical fiber probe for simultaneous measurements of a CO2 bubble chord length, velocity and void fraction and the local CO2 concentration in the surrounding liquid[J]. Flow Measurement and Instrumentation, 2012, 27: 8-19.
[11] Chaumat H, Billetduquenne A M, Augier F, et al. On the reliability of an optical fibre probe in bubble column under industrial relevant operating conditions[J]. Experimental Thermal and Fluid Science, 2007, 31(6): 495-504.
[12] Higuchi M, Saito T. Quantitative characterizations of long-period fluctuations in a large-diameter bubble column based on point-wise void fraction measurements[J]. Chemical Engineering J., 2010, 160(1): 284-292.
[13] Guet S, Fortunati R V, Mudde R F, et al. Bubble velocity and size measurement with a four-point optical fiber probe[J]. Particle & Particle Systems Characterization, 2003, 20(3): 219-230.
