• Infrared and Laser Engineering
  • Vol. 50, Issue 10, 20200461 (2021)
Lin Chen1、2, Wenlong Wu2, Junpu Zhao2, Zhenguo Wang2, and Qiang Liu1
Author Affiliations
  • 1Department of Precision Instruments, Tsinghua University, Beijing 100084, China
  • 2Research Center of Laser Fusion, Chinese Academy of Engineering and Physics, Mianyang 621900, China
  • show less
    DOI: 10.3788/IRLA20200461 Cite this Article
    Lin Chen, Wenlong Wu, Junpu Zhao, Zhenguo Wang, Qiang Liu. Gain and laser output performance of JG2 Nd: glass in 400 mm aperture slab amplifier[J]. Infrared and Laser Engineering, 2021, 50(10): 20200461 Copy Citation Text show less

    Abstract

    The experiment result of gain performance of JG2 Nd:glass and the output of whole furniture was introduced which would be applied in 400 mm aperture slab amplifiers from high power inertial confinement fusion laser equipment. A 4×2 combined slab amplifier system of three-pieces-length and 400 mm-aperture was used to study the gain function. The gain and output experiment results of JG2 Nd: glass show that the small signal gain coefficient reaches 5.37%/cm, and the gain multiple of small signal is 1.284 times/pass when the system operating voltage is 31 kV. The thermal recovery time is about 2 h after cooling with clean and dry gas at a velocity of 0.3 m/s. Besides, experimental results acquired by Integration-Test-Bed (ITB) laser facility show that the optimal combination of JG2 and N41 Nd: glass reaches the maximum output energy of 21.3 kJ/1053 nm, and has been operated stably for more than 500 shots, without any faults such as abnormal cladding layer and material body damage.
    Lin Chen, Wenlong Wu, Junpu Zhao, Zhenguo Wang, Qiang Liu. Gain and laser output performance of JG2 Nd: glass in 400 mm aperture slab amplifier[J]. Infrared and Laser Engineering, 2021, 50(10): 20200461
    Download Citation