[1] Xu Q C, Jiang J B, Chen Y et al. Numerical analysis of steady-state and dynamic characteristics of typical molded line groove dry gas seals[J]. Tribology, 38, 584-594(2018).

[2] Chen Y, Jiang J B, Peng X D. Dynamic characteristics and transient sealing performance analysis of hyperelliptic curve groove dry gas seals[J]. Tribology International, 116, 217-228(2017).

[3] Yan R Q, Chen H Q, Zhang W Z et al. Calculation and verification of flow field in supercritical carbon dioxide dry gas seal based on turbulent adiabatic flow model[J]. Tribology International, 165, 107275(2022).

[4] Wang Y M, Wang Q, Lü Y et al. Research arid development of a spiral groove face seal and its supporting system used for turbocornpressors[J]. Fluid Machinery, 20, 1-6, 65(1992).

[5] Song P Y. The liquid film characteristics of the hydrodynamic mechanical seal with a spiral grooved face[D](1999).

[6] Ning J H. Application of photoetching to liquid hydrodynamic seal[J]. Journal of Rocket Propulsion, 31, 41-43(2005).

[7] Chen S L, Hsu Q C. Studies on electric-discharge machining of non-contact seal face grooves[J]. Journal of Materials Processing Technology, 140, 363-367(2003).

[8] Chen Y, Peng X D, Jiang J B et al. Experimental and theoretical studies of the dynamic behavior of a spiral-groove dry gas seal at high-speeds[J]. Tribology International, 125, 17-26(2018).

[9] Jiang J B, Peng X D, Li J Y et al. A comparative study on the performance of typical types of bionic groove dry gas seal based on bird wing[J]. Journal of Bionic Engineering, 13, 324-334(2016).

[10] Ma X Z, Meng X K, Wang Y M et al. Suction effect of cavitation in the reverse-spiral-grooved mechanical face seals[J]. Tribology International, 132, 142-153(2019).

[11] Gilbert D, Stoesslein M, Axinte D et al. A time based method for predicting the workpiece surface micro-topography under pulsed laser ablation[J]. Journal of Materials Processing Technology, 214, 3077-3088(2014).

[12] Wang Y, Zhang M Y, Dong Y H et al. Morphology modelling and validation in nanosecond pulsed laser ablation of metallic materials[J]. Precision Engineering, 79, 34-42(2023).

[13] Zhang R, Huang C Z, Wang J et al. Experimental investigation and optimization of femtosecond laser processing parameters of silicon carbide–based on response surface methodology[J]. Ceramics International, 48, 14507-14517(2022).

[14] Marques A, Cunha A, Faria S et al. Predictive models on the influence of laser texturing parameters on the Inconel 718 surface by using Nd: YVO4 laser[J]. Optics & Laser Technology, 154, 108320(2022).

[15] Marla D, Bhandarkar U V, Joshi S S. A model of laser ablation with temperature-dependent material properties, vaporization, phase explosion and plasma shielding[J]. Applied Physics A, 116, 273-285(2014).

[16] Marla D, Bhandarkar U V, Joshi S S. Modeling nanosecond pulsed laser ablation: a focus on temperature dependence of material properties[J]. Manufacturing Letters, 2, 13-16(2014).

[17] Wang Y F, Yu Z, Li K M et al. Numerical simulation of micro-pit morphology of titanium alloy ablated by nanosecond laser[J]. Chinese Journal of Lasers, 49, 0802008(2022).

[18] Zhang S, Wen J W. Study on laser processing technique of SiC ceramic ring seal end surface fluid dynamic grooves[J]. Applied Laser, 20, 175-178, 184(2000).

[19] Mao W Y, Song P Y, Deng Q G et al. Research on laser processing technology of spiral groove for dry gas seal[J]. Advanced Engineering Sciences, 50, 253-262(2018).

[20] Wang Y, Wang Y Y, Xiao Y F et al. Ultrafast laser precision machining of dry gas seal based on ordered texture design[J]. Materials Reports, 36, 44-52(2022).

[21] Mao W Y, Song P Y, Deng Q G et al. Optimization of laser processing technology for dry gas seal spiral groove based on ACE method[J]. Advanced Engineering Sciences, 53, 195-202(2021).

[22] Lin J J, Ming R, Li X K et al. Study on morphology characteristics of femtosecond laser-ablated face gear materials[J]. Chinese Journal of Lasers, 48, 1402017(2021).

[23] Elsied A M, Dieffenbach P C, Diwakar P K et al. Nanosecond laser-metal ablation at different ambient conditions[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 143, 26-31(2018).

[24] Wang Y, Zhang M Y, Huang Y et al. Ablation threshold modelling and validation of metal Nanosecond laser processing[J]. Optics Communications, 523, 128608(2022).

[25] Pecholt B, Vendan M, Dong Y Y et al. Ultrafast laser micromachining of 3C-SiC thin films for MEMS device fabrication[J]. The International Journal of Advanced Manufacturing Technology, 39, 239-250(2008).

[26] Zheng B X, Jiang G D, Wang W J et al. Ablation experiment and threshold calculation of titanium alloy irradiated by ultra-fast pulse laser[J]. AIP Advances, 4, 031310(2014).

[27] Dou H Q, Yao C Z, Liu H et al. Femtosecond laser ablation of Al-Mg alloy in vacuum and air[J]. Applied Surface Science, 447, 388-392(2018).

[28] An H J, Wang J S, Fang F Z. Removal of SiC at atomic and close-to-atomic scale by nanosecond ultraviolet laser[J]. Optics & Laser Technology, 158, 108863(2023).

[29] Vasantgadkar N A, Bhandarkar U V, Joshi S S. A finite element model to predict the ablation depth in pulsed laser ablation[J]. Thin Solid Films, 519, 1421-1430(2010).

[30] Yan Z X, Mei X S, Wang W J et al. Numerical simulation on nanosecond laser ablation of titanium considering plasma shield and evaporation-affected surface thermocapillary convection[J]. Optics Communications, 453, 124384(2019).

[31] Nolte S, Momma C, Jacobs H et al. Ablation of metals by ultrashort laser pulses[J]. Journal of the Optical Society of America B, 14, 2716-2722(1997).

[32] Li J, Ji L F, Hu Y et al. Experimental study on milling of Y-TZP ceramic by 532 nm laser[J]. Chinese Journal of Lasers, 42, 0806002(2015).