Contents
2018
Volume: 8 Issue 3
12 Article(s)
Export citation format
Regular
Study on Snake Venom Protein-Antibody Interaction by Surface Plasmon Resonance Spectroscopy
Subhankar N., Barlina KONWAR, Simran KAUR, Robin DOLEY, and Biplob MONDAL
The development of a portable and inexpensive surface plasmon resonance (SPR) measurement device with the integrated biosensor for the detection of snake venom protein is presented in this paper. For the construction of the sensing element, amine coupling chemistry is used to bio-functionalize silver coated glass slideThe development of a portable and inexpensive surface plasmon resonance (SPR) measurement device with the integrated biosensor for the detection of snake venom protein is presented in this paper. For the construction of the sensing element, amine coupling chemistry is used to bio-functionalize silver coated glass slide with antibodies like immunoglobulin (IgG). The immobilization of the antibody is confirmed by spectroscopic measurements like ultraviolet-visible spectroscopy (UV-Vis) and Fourier-transforms infrared spectroscopy (FTIR). The device is calibrated with the standard solution of sodium chloride and ethanol before testing venom protein samples. To investigate the bio-molecular interactions, crude venom of Indian cobra (concentration range: 0.1 mg/ml ~ 1.0 mg/ml) in the phosphate buffer solution (PBS) are exposed to the biosensor. The experimentally measured data indicate the shift in the plasmon resonance angle from its initial value (52°) to 54° for 0.1 mg/ml and 60° for 1.0 mg/ml protein solution..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 193 (2018)
High-Speed Mach-Zehnder-OTDR Distributed Optical Fiber Vibration Sensor Using Medium-Coherence Laser
Yuheng TONG, Zhengying LI, Jiaqi WANG, Honghai WANG, and Haihu YU
This article presents a high-speed distributed vibration sensing based on Mach-Zehnder-OTDR (optical time-domain reflectometry). Ultra-weak fiber Bragg gratings (UWFBG), whose backward light intensity is 2~4 orders of magnitude higher than that of Rayleigh scattering, are used as the reflection markers. A medium-cohereThis article presents a high-speed distributed vibration sensing based on Mach-Zehnder-OTDR (optical time-domain reflectometry). Ultra-weak fiber Bragg gratings (UWFBG), whose backward light intensity is 2~4 orders of magnitude higher than that of Rayleigh scattering, are used as the reflection markers. A medium-coherence laser can substitute conventional narrow bandwidth source to achieve an excellent performance of distributed vibration sensing since our unbalanced interferometer matches the interval of UWFBGs. The 3 m of spatial resolution of coherent detection and multiple simultaneous vibration sources locating can be realized based on OTDR. The enhanced signal to noise ratio (SNR) enables fast detection of distributed vibration without averaging. The fastest vibration of 25 kHz and the slowest vibration of 10 Hz can be detected with our system successfully, and the linearity is 0.9896 with a maximum deviation of 3.46 nε..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 203 (2018)
Strong Influence of Temperature and Vacuum on the Photoluminescence of In0.3Ga0.7As Buried and Surface Quantum Dots
Guodong WANG, Huiqiang JI, Junling SHEN, Yonghao XU, Xiaolian LIU, and Ziyi FU
The strong influences of temperature and vacuum on the optical properties of In0.3Ga0.7As surface quantum dots (SQDs) are systematically investigated by photoluminescence (PL) measurements. For comparison, optical properties of buried quantum dots (BQDs) are also measured. The line-width, peak wavelength, and lifetime The strong influences of temperature and vacuum on the optical properties of In0.3Ga0.7As surface quantum dots (SQDs) are systematically investigated by photoluminescence (PL) measurements. For comparison, optical properties of buried quantum dots (BQDs) are also measured. The line-width, peak wavelength, and lifetime of SQDs are significantly different from the BQDs with the temperature and vacuum varied. The differences in PL response when temperature varies are attributed to carrier transfer from the SQDs to the surface trap states. The obvious distinctions in PL response when vacuum varies are attributed to the SQDs intrinsic surface trap states inhibited by the water molecules. This research provides necessary information for device application of SQDs as surface-sensitivity sensors..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 213 (2018)
Mellin Transform-Based Correction Method for Linear Scale Inconsistency of Intrusion Events Identification in OFPS
Baocheng WANG, Dandan QU, Qing TIAN, and Liping PANG
For the problem that the linear scale of intrusion signals in the optical fiber pre-warning system (OFPS) is inconsistent, this paper presents a method to correct the scale. Firstly, the intrusion signals are intercepted, and an aggregate of the segments with equal length is obtained. Then, the Mellin transform (MT) isFor the problem that the linear scale of intrusion signals in the optical fiber pre-warning system (OFPS) is inconsistent, this paper presents a method to correct the scale. Firstly, the intrusion signals are intercepted, and an aggregate of the segments with equal length is obtained. Then, the Mellin transform (MT) is applied to convert them into the same scale. The spectral characteristics are obtained by the Fourier transform. Finally, we adopt back-propagation (BP) neural network to identify intrusion types, which takes the spectral characteristics as input. We carried out the field experiments and collected the optical fiber intrusion signals which contain the picking signal, shoveling signal, and running signal. The experimental results show that the proposed algorithm can effectively improve the recognition accuracy of the intrusion signals..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 220 (2018)
Output Characteristics of GaAs Cell Irradiated by Laser
Xiaowei LI
The output characteristics of GaAs cell are keys for the laser wireless power transmission system design. The measurement platform for the output characteristics of GaAs cell is established by single-junction GaAs cell and 1064 nm fiber laser. The influence rules of laser power and temperature on the short-circuit currThe output characteristics of GaAs cell are keys for the laser wireless power transmission system design. The measurement platform for the output characteristics of GaAs cell is established by single-junction GaAs cell and 1064 nm fiber laser. The influence rules of laser power and temperature on the short-circuit current, open-circuit voltage, peak power, fill factor, and conversion efficiency are measured. The measurement results show that the conversion efficiency firstly increases and then decreases with an increase in laser power, and reaches a maximum of 54.5% at the laser power of 0.405 W, whereas the conversion efficiency decreases with an increase in temperature, and decreases slowly with an increase in laser power..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 228 (2018)
RVFL-Based Optical Fiber Intrusion Signal Recognition With Multi-Level Wavelet Decomposition as Feature
Yanping WANG, Dianjun GONG, Liping PANG, and Dan YANG
The optical fiber pre-warning system (OFPS) has been gradually considered as one of the important means for pipeline safety monitoring. Intrusion signal types are correctly identified which could reduce the cost of troubleshooting and maintenance of the pipeline. Most of the previous feature extraction methods in OFPS The optical fiber pre-warning system (OFPS) has been gradually considered as one of the important means for pipeline safety monitoring. Intrusion signal types are correctly identified which could reduce the cost of troubleshooting and maintenance of the pipeline. Most of the previous feature extraction methods in OFPS are usually quested from the view of time domain. However, in some cases, there is no distinguishing feature in the time domain. In the paper, firstly, the intrusion signal features of the running, digging, and pick mattock are extracted in the frequency domain by multi-level wavelet decomposition, that is, the intrusion signals are decomposed into five bands. Secondly, the average energy ratio of different frequency bands is obtained, which is considered as the feature of each intrusion type. Finally, the feature samples are sent into the random vector functional-link (RVFL) network for training to complete the classification and identification of the signals. Experimental results show that the algorithm can correctly distinguish the different intrusion signals and achieve higher recognition rate..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 234 (2018)
An Optical MIM Pressure Sensor Based on a Double Square Ring Resonator
Pardis PALIZVAN, Saeed OLYAEE, and Mahmood SEIFOURI
In this paper, we have proposed a metal-insulator-metal (MIM) pressure sensor which consists of two plasmonic waveguides and a double square ring resonator. The two square rings are connected via a rectangular patch located between the two of them. The surface plasmon polaritons (SPPs) can be transferred from a square In this paper, we have proposed a metal-insulator-metal (MIM) pressure sensor which consists of two plasmonic waveguides and a double square ring resonator. The two square rings are connected via a rectangular patch located between the two of them. The surface plasmon polaritons (SPPs) can be transferred from a square ring to the other through this patch. The finite-difference time-domain method (FDTD) has been used to simulate the device. Applying a pressure on the structure, it deforms, and a red shift of 103 nm in the resonance wavelength has been calculated. The deformation is linearly proportional to the wavelength shift in a wide range of wavelength. The proposed optical plasmonic pressure sensor has a sensitivity of 16.5 nm/MPa which makes it very suitable for using in biological and biomedical engineering..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 242 (2018)
Porous Silicon Based Bragg-Grating Resonator for Refractive Index Biosensor
Sourabh SAHU, Jalil ALI, Preecha P., and Ghanshyam SINGH
In this work, we have evaluated the biosensing capability of the porous silicon (PSi) based sidewall Bragg-grating resonator. The approximation of the quasi-TE mode full vector for the eigenmode calculation is performed using a full vector mode solver. The transmission spectra of the device are evaluated using the tranIn this work, we have evaluated the biosensing capability of the porous silicon (PSi) based sidewall Bragg-grating resonator. The approximation of the quasi-TE mode full vector for the eigenmode calculation is performed using a full vector mode solver. The transmission spectra of the device are evaluated using the transfer matrix method. We have observed a shift in the resonant band for a change in the refractive index of biomaterial in the upper cladding region. The theoretical value of the bulk sensitivity is calculated to be 387.48 nm/RIU. The device is suitable for biosensing application due to its ability of interacting signal with the infiltrated analytes in the PSi waveguide core..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 248 (2018)
Calibration Method to Eliminate Zeroth Order Effect in Lateral Shearing Interferometry
Chao FANG, Yang XIANG, Keqi QI, and Dawei CHEN
In this paper, a calibration method is proposed which eliminates the zeroth order effect in lateral shearing interferometry. An analytical expression of the calibration error function is deduced, and the relationship between the phase-restoration error and calibration error is established. The analytical results show tIn this paper, a calibration method is proposed which eliminates the zeroth order effect in lateral shearing interferometry. An analytical expression of the calibration error function is deduced, and the relationship between the phase-restoration error and calibration error is established. The analytical results show that the phase-restoration error introduced by the calibration error is proportional to the phase shifting error and zeroth order effect. The calibration method is verified using simulations and experiments. The simulation results show that the phase-restoration error is approximately proportional to the phase shift error and zeroth order effect, when the phase shifting error is less than 2° and the zeroth order effect is less than 0.2. The experimental result shows that compared with the conventional method with 9-frame interferograms, the calibration method with 5-frame interferograms achieves nearly the same restoration accuracy..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 255 (2018)
Benzene Shape Photonic Crystal Fiber Based Plasma Sensor: Design and Analysis
Md. Toriqul, Md. Golam, Kawsar AHMED, and Sawrab CHOWDHURY
A novel benzene core photonic crystal fiber (BC-PCF) is proposed for plasma sensing applications. The proposed BC-PCF parameters have been tuned to gain high sensitivity, high numerical aperture (NA), and low confinement loss, and modality over the extensive variety of 0.7 μm to 1.9 μm wavelength. The explored results A novel benzene core photonic crystal fiber (BC-PCF) is proposed for plasma sensing applications. The proposed BC-PCF parameters have been tuned to gain high sensitivity, high numerical aperture (NA), and low confinement loss, and modality over the extensive variety of 0.7 μm to 1.9 μm wavelength. The explored results for the ideal structure have exhibited the high sensitivity up to 77.84% and negligible confinement loss of 7.9 × 10-3 dB/m at 1.3 μm wavelength. The V-barometer remains under 2.405 over the whole working wavelength. So the proposed BC-PCF is a single mode fiber, which advances the long partition correspondence applications. Furthermore, high numerical aperture (NA) makes the fiber potential candidate in medical imaging applications. The plan of the sensor is to find out the creative potential outcomes in sensing applications..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 263 (2018)
Research on a Pulse Interference Filter Used for the Fiber Bragg Grating Interrogation System
Weifang ZHANG, Feifei REN, Yingwu LI, Bo JIN, and Wei DAI
In this paper, a novel pulse interference filter for fiber Bragg grating (FBG) interrogation based on the tunable Fabry-Perot (F-P) filtering principle is proposed and experimentally demonstrated. The self-developed FBG interrogation system is devised for the aircraft health management of key structures. Nevertheless, In this paper, a novel pulse interference filter for fiber Bragg grating (FBG) interrogation based on the tunable Fabry-Perot (F-P) filtering principle is proposed and experimentally demonstrated. The self-developed FBG interrogation system is devised for the aircraft health management of key structures. Nevertheless, the pulse interference is detected in the reflection spectrum of FBG causing interrogation system unstable. To address the problem, the first-order lag pulse broadening filter is proposed in this paper. The first-order lag filter is applied to preprocess and smooth the original signal, meanwhile enhancing the signal-to-noise ratio (SNR). Afterwards, peaks of reflection spectrum are distinguished with pulse interference by pulse broadening. Experimental results indicate that 634 peaks are detected before adopting the first-order lag pulse broadening filter. Comparatively, the number of peaks decreases to 203 after filtering the interference pulse, and the correct rate of peak detection is higher than 98.5%. Through the comparison with the finite impulse response (FIR) filter, the advantage of first-order lag filter is proved. The vibration monitoring experiment demonstrates that this system has high dynamic precision with a dynamic interrogation range of 0 Hz–400 Hz, and the maximum repetition rate of 800 Hz..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 270 (2018)
Composite Sinusoidal Nanograting With Long-Range SERS Effect for Label-Free TNT Detection
Cheng XIAO, Zhibin CHEN, Mengze QIN, Dongxiao ZHANG, and Lei FAN
A composite one-dimensional (1D) Ag sinusoidal nanograting aiming at label-free surface enhanced Raman scattering (SERS) detection of TNT with robust and reproducible enhancements is discussed. 1D periodic sinusoidal SiO2 grating followed by Ag evaporation is proposed for the creation of reproducible and effective SERSA composite one-dimensional (1D) Ag sinusoidal nanograting aiming at label-free surface enhanced Raman scattering (SERS) detection of TNT with robust and reproducible enhancements is discussed. 1D periodic sinusoidal SiO2 grating followed by Ag evaporation is proposed for the creation of reproducible and effective SERS substrate based on surface plasmon polaritons (SPPs). The optimal structure of 1D sinusoidal nanograting and its long-range SERS effect are analyzed by using the finite difference time domain (FDTD). Simulation SERS enhancement factor (EF) can be 5 orders of magnitude as possible. This SERS substrate is prepared by the interference photolithography technology, its SERS performance is tested by Rh6G detection experiments, and the actual test EF is about 104. The label-free SERS detection capacity of TNT is demonstrated in the experiment..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 8, Issue 3, 278 (2018)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20