Contents
2015
Volume: 5 Issue 1
14 Article(s)
Export citation format
Regular
Effect of Wavelength on Metrological Characteristics of Non-Holographic Fiber Specklegram Sensor
Victor H. ARISTIZABAL, Alejandro HOYOS, Edgar RUEDA, Nelson D. GOMEZ, and Jorge A. GOMEZ
In this paper, we report some results about the effects of varying the wavelength in a structure of a non-holographic fiber specklegram sensor. In these arrangements, the speckle pattern produced by a multi-mode optical fiber is coupled to the asingle-mode optical fiber with lower numerical aperture, which produces a fIn this paper, we report some results about the effects of varying the wavelength in a structure of a non-holographic fiber specklegram sensor. In these arrangements, the speckle pattern produced by a multi-mode optical fiber is coupled to the asingle-mode optical fiber with lower numerical aperture, which produces a filtering effect that can be used as an optical transduction mechanism. The influence of the wavelength on the sensor performance is evaluated by changing the laser wavelength, and a strong effect on the linearity and reproducibility of its response is found. Lasers emitting at 1310 nm, 1550 nm, and 1625 nm are used..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 1 (2015)
Scheme of Optical Fiber Temperature Sensor Employing Deep-Grooved Process Optimization
Yu LIU, Cong LIU, Gaolin XIANG, Ruijie WANG, Yibing WANG, Lei Xiang, Linzhi WU, and and Song LIU
To optimize the optical fiber temperature sensor employing the deep-grooved process, a novel scheme was proposed. Fabricated by the promising CO2 laser irradiation system based on the two-dimensional scanning motorized stage with high precision, the novel deep-grooved optical fiber temperature sensor was obtained with To optimize the optical fiber temperature sensor employing the deep-grooved process, a novel scheme was proposed. Fabricated by the promising CO2 laser irradiation system based on the two-dimensional scanning motorized stage with high precision, the novel deep-grooved optical fiber temperature sensor was obtained with its temperature sensitivity of the transmission attenuation –0.107 dB/℃, which was 18.086 times higher than the optical fiber sensor with the normal depth of grooves while other parameters remained unchanged. The principal research and experimental testing showed that the designed temperature sensor measurement unit had the ability of high sensitivity in transmission attenuation and insensitivity to the wavelength, which offers possible applications in engineering..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 6 (2015)
Design of Mach-Zehnder Interferometer and Ring Resonator for Biochemical Sensing
Dedi IRAWAN, Toto SAKTIOTO, Jalil ALI, and and Preecha YUPAPIN
We proposed a compact design of an optical biochemical sensor based on the Mach-Zehnder interferometer (MZI), which was coupled by a ring resonator (RR) as a sensing tool. The sensor sensitivity has been determined by power difference at the output ports. The sensor enhancement has been optimized by numerically evaluatWe proposed a compact design of an optical biochemical sensor based on the Mach-Zehnder interferometer (MZI), which was coupled by a ring resonator (RR) as a sensing tool. The sensor sensitivity has been determined by power difference at the output ports. The sensor enhancement has been optimized by numerically evaluating the geometrical parameters of the MZI and RR. A great sensor sensitivity depicted by Fano resonance characteristic has been demonstrated as a function of the round trip phase in the range of 4×10–4 – 4×10–4, which was changed by the presence of the sample solution in the sensing area. This optimum sensitivity has been obtained for the values of two coupling coefficients of the MZI 120.5/mmκκ==and the coupling coefficient between the MZI arm and RR 0.5/mm.Rκ= Furthermore, a good profile of sensitivity exchange has been exhibited by inducing the direct current voltage to the coupling region of Rκ. Finally, the output power transmission of the ring-coupled arm was depicted as a function of tunable κR..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 12 (2015)
Rockfall Hazard Alarm Strategy Based on FBG Smart Passive Net Structure
Sheng LI, Junjie MA, and and Jun HU
In order to realize working state remote monitoring for a passive net, alarm timely and correctly for the rockfall invasion, and solve the disadvantages in the existing means, such as needing power supply in situ, vulnerability to electromagnetic interference and environmental climate impact, a smart passive net structIn order to realize working state remote monitoring for a passive net, alarm timely and correctly for the rockfall invasion, and solve the disadvantages in the existing means, such as needing power supply in situ, vulnerability to electromagnetic interference and environmental climate impact, a smart passive net structure based on the optical fiber sensing technology was designed which equipped with intercepting and sensing functions. The wire rope net as one part of the smart passive net was weaved with two kinds of optical fiber sensing elements, namely, fiber Bragg grating (FBG) perimeter severity sensors and optical fiber monitoring net with each end of the tail fiber containing an FBG probe. Based on the proposed smart structure, a combination alarm strategy for rockfall was proposed, which can distinguish transmission bug, whether the rockfall invasion or net broken occurs. Through a designed simulation test, the effectiveness of the proposed alarm strategy was certificated..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 19 (2015)
Enhancing the Linearity Characteristics of Photoelectric Displacement Sensor Based on Extreme Learning Machine Method
Murugan SETHURAMALINGAM, and and Umayal SUBBIAH
Photoelectric displacement sensors rarely possess a perfectly linear transfer characteristic, but always have some degree of non-linearity over their range of operation. If the sensor output is nonlinear, it will produce a whole assortment of problems. This paper presents a method to compensate the nonlinearity of the Photoelectric displacement sensors rarely possess a perfectly linear transfer characteristic, but always have some degree of non-linearity over their range of operation. If the sensor output is nonlinear, it will produce a whole assortment of problems. This paper presents a method to compensate the nonlinearity of the photoelectric displacement sensor based on the extreme learning machine (ELM) method which significantly reduces the amount of time needed to train a neural network with the output voltage of the optical displacement sensor and the measured input displacement to eliminate the nonlinear errors in the training process. The use of this proposed method was demonstrated through computer simulation with the experimental data of the sensor. The results revealed that the proposed method compensated the presence of nonlinearity in the sensor with very low training time, lowest mean squared error (MSE) value, and better linearity. This research work involved less computational complexity, and it behaved a good performance for nonlinearity compensation for the photoelectric displacement sensor and has a good application prospect..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 24 (2015)
Study of Modeling Aspects of Long Period Fiber Grating Using Three-Layer Fiber Geometry
Amit SINGH
The author studied and demonstrated the various modeling aspects of long period fiber grating (LPFG) such as the core effective index, cladding effective index, coupling coefficient, coupled mode theory, and transmission spectrum of the LPFG using three-layer fiber geometry. Actually, there are two different techniquesThe author studied and demonstrated the various modeling aspects of long period fiber grating (LPFG) such as the core effective index, cladding effective index, coupling coefficient, coupled mode theory, and transmission spectrum of the LPFG using three-layer fiber geometry. Actually, there are two different techniques used for theoretical modeling of the long period fiber grating. The first technique was used by Vengsarkar et al who described the phenomenon of long-period fiber gratings, and the second technique was reported by Erdogan who revealed the inaccuracies and shortcomings of the original method, thereby providing an accurate and updated alternative. The main difference between these two different approaches lies in their fiber geometry. Venserkar et al used two-layer fiber geometry which is simple but employs weakly guided approximation, whereas Erdogan used three-layer fiber geometry which is complex but also the most accurate technique for theoretical study of the LPFG. The author further discussed about the behavior of the transmission spectrum by altering different grating parameters such as the grating length, ultraviolet (UV) induced-index change, and grating period to achieve the desired flexibility. The author simulated the various results with the help of MATLAB..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 32 (2015)
Design and Simulation of Ultrasensitive Nano-Biosensor Based on OFPC
Mehdi NEJADEBRAHIMY, Lida HALIMI, and and Hamed ALIPOUR-BANAEI
We designed and simulated a nano-biosensor to work in wet chemical optical processes for the determination and analysis of gaseous or liquid media. For this purpose, the optical properties of materials have been studied, and by creating the relationship between the refractive index of materials and other optical parameWe designed and simulated a nano-biosensor to work in wet chemical optical processes for the determination and analysis of gaseous or liquid media. For this purpose, the optical properties of materials have been studied, and by creating the relationship between the refractive index of materials and other optical parameters, the measurement process was carried out. In this work, an optical filter based on the photonic crystal (OFPC) was used. By creating an active environment for the interaction between the substance and electromagnetic light, a situation to measure the properties of available substances in that active environment could be provided. Considering that the defect created in the OFPC may cause disruption in its operation, so the volume of the environment should be limited. Creation of defects in the structure of the nano-biosensors can increase the accuracy and quality of measurements; finally by rearranging the created defects, the output will be placed in the appropriate scope. The accuracy is increased by applying the finite difference time domain (FDTD) modeling approach in order to analyze the wave equations governing the structure of the photonics crystal..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 43 (2015)
An Extrinsic Fiber Fabry-Perot Interferometer for Dynamic Displacement Measurement
S. PULLTEAP, and and H. C. SEAT
A versatile fiber interferometer was proposed for high precision measurement. The sensor exploited a double-cavity within the unique sensing arm of an extrinsic-type fiber Fabry-Perot interferometer to produce the quadrature phase-shifted interference fringes. Interference signal processing was carried out using a modiA versatile fiber interferometer was proposed for high precision measurement. The sensor exploited a double-cavity within the unique sensing arm of an extrinsic-type fiber Fabry-Perot interferometer to produce the quadrature phase-shifted interference fringes. Interference signal processing was carried out using a modified zero-crossing (fringe) counting technique to demodulate two sets of fringes. The fiber interferometer has been successfully employed for dynamic displacement measurement under different displacement profiles over a range of 0.7 μm to 140 μm. A dedicated computer incorporating the demodulation algorithm was next used to interpret these detected data as well as plot the displacement information with a resolution of λ/64. A commercial displacement sensor was employed for comparison purposes with the experimental data obtained from the fiber interferometer as well as to gauge its performance, resulting in the maximum error of 2.8% over the entire displacement range studied..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 50 (2015)
Polyimide-Coated Fiber Bragg Grating for Relative Humidity Sensing
Yao LIN, Yuan GONG, Yu WU, and and Huijuan WU
A fiber-optic humidity sensor has been fabricated by coating a moisture sensitive polymer film to the fiber Bragg grating (FBG). The Bragg wavelength of the polyimide-coated FBG changes while it is exposed to different humidity conditions due to the volume expansion of the polyimide coating. The characteristics of sensA fiber-optic humidity sensor has been fabricated by coating a moisture sensitive polymer film to the fiber Bragg grating (FBG). The Bragg wavelength of the polyimide-coated FBG changes while it is exposed to different humidity conditions due to the volume expansion of the polyimide coating. The characteristics of sensors, including sensitivity, temporal response, and hysteresis, were improved by controlling the coating thickness and the degree of imidization during the thermal curing process of the polyimide. In the relative humidity (RH) condition ranging from 11.3% RH to 97.3% RH, the sensitivity of the sensor was about 13.5 pm/% RH with measurement uncertainty of ±1.5% RH..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 60 (2015)
A Coal Mine Multi-Point Fiber Ethylene Gas Concentration Sensor
Yubin WEI, Jun CHANG, Jie LIAN, and and Tongyu LIU
Spontaneous combustion of the coal mine goaf is one of the main disasters in the coal mine. The detection technology based on symbolic gas is the main means to realize the spontaneous combustion prediction of the coal mine goaf, and ethylene gas is an important symbol gas of spontaneous combustion in the coal acceleratSpontaneous combustion of the coal mine goaf is one of the main disasters in the coal mine. The detection technology based on symbolic gas is the main means to realize the spontaneous combustion prediction of the coal mine goaf, and ethylene gas is an important symbol gas of spontaneous combustion in the coal accelerated oxidation stage. In order to overcome the problem of current coal ethylene detection, the paper presents a mine optical fiber multi-point ethylene concentration sensor based on the tunable diode laser absorption spectroscopy. Based on the experiments and analysis of the near-infrared spectrum of ethylene, the system employed the 1.62 μm (DFB) wavelength fiber coupled distributed feedback laser as the light source. By using the wavelength scanning technique and developing a stable fiber coupled Herriot type long path gas absorption cell, a ppm-level high sensitivity detecting system for the concentration of ethylene gas was realized, which could meet the needs of coal mine fire prevention goaf prediction..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 67 (2015)
On-Line Defect Detection of Aluminum Coating Using Fiber Optic Sensor
Supriya S. PATIL, and A. D. SHALIGRAM
Aluminum metallization using the sprayed coating for exhaust mild steel (MS) pipes of tractors is a standard practice for avoiding rusting. Patches of thin metal coats are prone to rusting and are thus considered as defects in the surface coating. This paper reports a novel configuration of the fiber optic sensor for oAluminum metallization using the sprayed coating for exhaust mild steel (MS) pipes of tractors is a standard practice for avoiding rusting. Patches of thin metal coats are prone to rusting and are thus considered as defects in the surface coating. This paper reports a novel configuration of the fiber optic sensor for on-line checking the aluminum metallization uniformity and hence for defect detection. An optimally chosen high bright 440 nm BLUE LED (light-emitting diode) launches light into a transmitting fiber inclined at the angle of 60° to the surface under inspection placed adequately. The reflected light is transported by a receiving fiber to a blue enhanced photo detector. The metallization thickness on the coated surface results in visually observable variation in the gray shades. The coated pipe is spirally inspected by a combination of linear and rotary motions. The sensor output is the signal conditioned and monitored with RISHUBH DAS. Experimental results show the good repeatability in the defect detection and coating non-uniformity measurement..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 72 (2015)
Nonlinear Refractive Index Measurement Utilizing Bistable Behavior of Double Coupling Optical Fiber Ring Resonator
Lei YANG, Wei PAN, Bin LUO, and and Lianshan YAN
A novel approach for measuring the nonlinear refractive index of an optical fiber utlizing the bistable behavior of the double coupling optical fiber ring resonator was proposed and investigated. The switch-off or switch-on power decreases with an increase in the nonlinear refractive index n2 (m2/W), and the dependenceA novel approach for measuring the nonlinear refractive index of an optical fiber utlizing the bistable behavior of the double coupling optical fiber ring resonator was proposed and investigated. The switch-off or switch-on power decreases with an increase in the nonlinear refractive index n2 (m2/W), and the dependence of swith-off or switch-on power on the nonlinear refractive index was analyzed numerically. Simulation results showed that the switch-off power and switch-on power (in dBW) decreased linearly with 102log()n in a 100-m-length fiber ring resonator, when n2 changed from 3.2×10-20 m2/W to 2.5×10-17 m2/W or nearly n2=3.2×10-20 m2/W. These mean that high accuracy as well as large-scale nonlinear refractive index measurement can be achieved by the proposed approach..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 79 (2015)
Optimization Study on Graphene-Coated Microfiber Bragg Grating Structures for Ammonia Gas Sensing
Anqi ZHANG, Yu WU, Baicheng YAO, and and Yuan GONG
The excitation of the surface field and evanescent enhancement in the graphene have shown sensitive to the refractive index of surrounding media and potential applications in high-sensitivity biochemical sensing. In this paper, we investigate the graphene-coated microfiber Bragg gratings (GMFBGs) with different diameteThe excitation of the surface field and evanescent enhancement in the graphene have shown sensitive to the refractive index of surrounding media and potential applications in high-sensitivity biochemical sensing. In this paper, we investigate the graphene-coated microfiber Bragg gratings (GMFBGs) with different diameters for ammonia gas sensing. The maximum sensitivity with 6 pm/ppm was achieved experimentally when the microfiber’s diameter was about 10 μm. Moreover, by adjusting the diameter of the GMFBG, the sensing performance of the GMFBGs could be optimized. Experimental results indicated that GMFBGs with the diameter of 8 μm – 12 μm would show the characteristics of the high sensitivity, relative low attenuation, and large dynamic range..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 84 (2015)
Realization of Rapid Debugging for Detection Circuit of Optical Fiber Gas Sensor: Using an Analog Signal Source
Changbin TIAN, Jun CHANG, Qiang WANG, Wei WEI, and and Cunguang ZHU
An optical fiber gas sensor mainly consists of two parts: optical part and detection circuit. In the debugging for the detection circuit, the optical part usually serves as a signal source. However, in the debugging condition, the optical part can be easily influenced by many factors, such as the fluctuation of ambientAn optical fiber gas sensor mainly consists of two parts: optical part and detection circuit. In the debugging for the detection circuit, the optical part usually serves as a signal source. However, in the debugging condition, the optical part can be easily influenced by many factors, such as the fluctuation of ambient temperature or driving current resulting in instability of the wavelength and intensity for the laser; for dual-beam sensor, the different bends and stresses of the optical fiber will lead to the fluctuation of the intensity and phase; the intensity noise from the collimator, coupler, and other optical devices in the system will also result in the impurity of the optical part based signal source. In order to dramatically improve the debugging efficiency of the detection circuit and shorten the period of research and development, this paper describes an analog signal source, consisting of a single chip microcomputer (SCM), an amplifier circuit, and a voltage-to-current conversion circuit. It can be used to realize the rapid debugging detection circuit of the optical fiber gas sensor instead of optical part based signal source. This analog signal source performs well with many other advantages, such as the simple operation, small size, and light weight..
Photonic Sensors
- Publication Date: Jan. 01, 1900
- Vol. 5, Issue 1, 91 (2015)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20