Journals >Optoelectronics Letters
Contents
2018
Volume: 14 Issue 2
17 Article(s)
Export citation format
All-fiber mode converter based on superimposed longperiod fiber gratings
Yan-ru XUE, Wei-hong BI, Wa JIN, Peng-fei TIAN, Peng JIANG, Qiang LIU, and Yun JIN
In this paper, a novel broadband all-fiber mode converter is proposed and experimentally demonstrated. Through writ-ing a pair of superimposed long period fiber gratings (SLPFGs) in tow-mode fiber (TMF) with a CO2 laser, the mode converter can realize the conversion from LP01 to LP11 owing to the phase matching conditiIn this paper, a novel broadband all-fiber mode converter is proposed and experimentally demonstrated. Through writ-ing a pair of superimposed long period fiber gratings (SLPFGs) in tow-mode fiber (TMF) with a CO2 laser, the mode converter can realize the conversion from LP01 to LP11 owing to the phase matching condition. Numerical and experi-mental results show that the bandwidth of this mode converter is 3 times broader than that of a single grating converter. The converter has low loss, high coupling efficiency, small size and is easy to fabricate, so it can be widely used in mode-division multiplexing..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 81 (2018)
A performance enhanced Rayleigh Brillouin optical time domain analysis sensing system
Yong-qian LI, Li-xin ZHANG, Han-bai FAN, and Hong and LI
Aiming at the problem of large fading noise in Rayleigh Brillouin optical time domain analysis system, a wavelength scanning technique is proposed to enhance the performance of the temperature sensing system. The principle of the proposed technique to reduce the fading noise is introduced based on the analysis of RayleAiming at the problem of large fading noise in Rayleigh Brillouin optical time domain analysis system, a wavelength scanning technique is proposed to enhance the performance of the temperature sensing system. The principle of the proposed technique to reduce the fading noise is introduced based on the analysis of Rayleigh Brillouin optical time domain analysis system. The experimental results show that the signal-to-noise ratio (SNR) at the end of optical fiber with length of 50 m after 17 times wavelength scanning is 5.21 dB higher than that with single wavelength, the Brillouin frequency shift (BFS) on the heated fiber with length of 70 m inserted at the center of sensing fiber can be accurately measured as 0.19 MHz, which is equivalent to a measurement accuracy of 0.19 °C. It indicates that the proposed tech-nique can realize high-accuracy temperature measurement and has huge potential in the field of long-distance and high-accuracy sensing..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 84 (2018)
LP01 to LP11 mode convertor based on side-polishedsmall-core single-mode fiber
Yan LIU, Yang LI, and Wei-dong LI
An all-fiber LP01-LP11 mode convertor based on side-polished small-core single-mode fibers (SMFs) is numerically demonstrated. The linearly polarized incident beam in one arm experiences π shift through a fiber half waveplate, and the side-polished parts merge into an equivalent twin-core fiber (TCF) which spatially shAn all-fiber LP01-LP11 mode convertor based on side-polished small-core single-mode fibers (SMFs) is numerically demonstrated. The linearly polarized incident beam in one arm experiences π shift through a fiber half waveplate, and the side-polished parts merge into an equivalent twin-core fiber (TCF) which spatially shapes the incident LP01 modes to the LP11 mode supported by the step-index few-mode fiber (FMF). Optimum conditions for the highest conversion efficiency are investigated using the beam propagation method (BPM) with an approximate efficiency as high as 96.7%. The proposed scheme can operate within a wide wavelength range from 1.3 μm to1.7 μm with overall conver-sion efficiency greater than 95%. The effective mode area and coupling loss are also characterized in detail by finite element method (FEM)..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 88 (2018)
Experimental study on cross-sensitivity of temperatureand vibration of embedded fiber Bragg grating sensors
Tao CHEN, Meng-li YE, Shu-liang LIU, and Yan and DENG
In view of the principle for occurrence of cross-sensitivity, a series of calibration experiments are carried out to solve the cross-sensitivity problem of embedded fiber Bragg gratings (FBGs) using the reference grating method. Moreover, an ultrasonic-vibration-assisted grinding (UVAG) model is established, and finiteIn view of the principle for occurrence of cross-sensitivity, a series of calibration experiments are carried out to solve the cross-sensitivity problem of embedded fiber Bragg gratings (FBGs) using the reference grating method. Moreover, an ultrasonic-vibration-assisted grinding (UVAG) model is established, and finite element analysis (FEA) is carried out under the monitoring environment of embedded temperature measurement system. In addition, the related temperature acquisition tests are set in accordance with requirements of the reference grating method. Finally, comparative analy-ses of the simulation and experimental results are performed, and it may be concluded that the reference grating method may be utilized to effectively solve the cross-sensitivity of embedded FBGs..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 92 (2018)
Influence of the layer parameters on the performance of the CdTe solar cells
Haddout Assiya, Raidou Abderrahim, and Fahoume and Mounir
Influence of the layer parameters on the performances of the CdTe solar cells is analyzed by SCAPS-1D. The ZnO: Al film shows a high efficiency than SnO2:F. Moreover, the thinner window layer and lower defect density of CdS films are the factor in the enhancement of the short-circuit current density. As well, to increaInfluence of the layer parameters on the performances of the CdTe solar cells is analyzed by SCAPS-1D. The ZnO: Al film shows a high efficiency than SnO2:F. Moreover, the thinner window layer and lower defect density of CdS films are the factor in the enhancement of the short-circuit current density. As well, to increase the open-circuit voltage, the respon-sible factors are low defect density of the absorbing layer CdTe and high metal work function. For the low cost of cell production, ultrathin film CdTe cells are used with a back surface field (BSF) between CdTe and back contact, such as PbTe. Further, the simulation results show that the conversion efficiency of 19.28% can be obtained for the cell with 1-μm-thick CdTe, 0.1-μm-thick PbTe and 30-nm-thick CdS..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 98 (2018)
Optical waveguides in fluoride lead silicate glasses fab-ricated by carbon ion implantation
Xiao-liang SHEN, Yue WANG, Qi-feng ZHU, Peng Lü, Wei-nan LI, and Chun-xiao and LIU
The carbon ion implantation with energy of 4.0 MeV and a dose of 4.0×1014 ions/cm2 is employed for fabricating the optical waveguide in fluoride lead silicate glasses. The optical modes as well as the effective refractive indices are measured by the prism coupling method. The refractive index distribution in the fThe carbon ion implantation with energy of 4.0 MeV and a dose of 4.0×1014 ions/cm2 is employed for fabricating the optical waveguide in fluoride lead silicate glasses. The optical modes as well as the effective refractive indices are measured by the prism coupling method. The refractive index distribution in the fluoride lead silicate glass waveguide is simulated by the reflectivity calculation method (RCM). The light intensity profile and the energy losses are calcu-lated by the .nite-difference beam propagation method (FD-BPM) and the program of stopping and range of ions in matter (SRIM), respectively. The propagation properties indicate that the C2+ ion-implanted fluoride lead silicate glass waveguide is a candidate for fabricating optical devices..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 104 (2018)
Digital output compensation for precise frequency transfer over commercial fiber link
Cheng CI, Hong WU, Ran TANG, Bo LIU, Xing CHEN, Xue-song ZHANG, Yu ZHANG, and Ying-xin and ZHAO
An ultra-highly precise and long-term stable frequency transmission system over 120 km commercial fiber link has been proposed and experimentally demonstrated. This system is based on digital output compensation technique to suppress phase fluctuations during the frequency transmission process. A mode-locked erbium-dopAn ultra-highly precise and long-term stable frequency transmission system over 120 km commercial fiber link has been proposed and experimentally demonstrated. This system is based on digital output compensation technique to suppress phase fluctuations during the frequency transmission process. A mode-locked erbium-doped fiber laser driven by a hydrogen maser serves as an optical transmitter. Moreover, a dense wavelength division multiplexing system is able to separate forward and backward signals with reflection effect excluded. The ultimate fractional frequency insta-bilities for the long-distance frequency distributed system are up to 3.14×10-15 at 1 s and 2.96×10-19 at 10 000 s, re-spectively..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 109 (2018)
Hierarchy Bayesian model based services awareness ofhigh-speed optical access networks
Hui-feng BAI
As the speed of optical access networks soars with ever increasing multiple services, the service-supporting ability of optical access networks suffers greatly from the shortage of service awareness. Aiming to solve this problem, a hier-archy Bayesian model based services awareness mechanism is proposed for high-speed As the speed of optical access networks soars with ever increasing multiple services, the service-supporting ability of optical access networks suffers greatly from the shortage of service awareness. Aiming to solve this problem, a hier-archy Bayesian model based services awareness mechanism is proposed for high-speed optical access networks. This approach builds a so-called hierarchy Bayesian model, according to the structure of typical optical access networks. Moreover, the proposed scheme is able to conduct simple services awareness operation in each optical network unit (ONU) and to perform complex services awareness from the whole view of system in optical line terminal (OLT). Simulation results show that the proposed scheme is able to achieve better quality of services (QoS), in terms of packet loss rate and time delay..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 114 (2018)
CO and CO2 dual-gas detection based on mid-infraredwideband absorption spectroscopy
Ming DONG, Guo-qiang ZHONG, Shu-zhuo MIAO, Chuan-tao ZHENG, and Yi-ding and WANG
A dual-gas sensor system is developed for CO and CO2 detection using a single broadband light source, pyroelectric detectors and time-division multiplexing (TDM) technique. A stepper motor based rotating system and a sin-gle-reflection spherical optical mirror are designed and adopted for realizing and enhancing dual-gA dual-gas sensor system is developed for CO and CO2 detection using a single broadband light source, pyroelectric detectors and time-division multiplexing (TDM) technique. A stepper motor based rotating system and a sin-gle-reflection spherical optical mirror are designed and adopted for realizing and enhancing dual-gas detection. De-tailed measurements under static detection mode (without rotation) and dynamic mode (with rotation) are performed to study the performance of the sensor system for the two gas samples. The detection period is 7.9 s in one round of de-tection by scanning the two detectors. Based on an Allan deviation analysis, the 1σ detection limits under static opera-tion are 3.0 parts per million (ppm) in volume and 2.6 ppm for CO and CO2, respectively, and those under dynamic operation are 9.4 ppm and 10.8 ppm for CO and CO2, respectively. The reported sensor has potential applications in various fields requiring CO and CO2 detection such as in the coal mine..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 119 (2018)
Measurement of high-dynamic temperature field usinghigh-speed quadriwave lateral shearing interferometer
Bo-chuan CUI, Jian-li WANG, Kai-nan YAO, and Tao and CHEN
An approach to measure a high-dynamic two-dimensional (2D) temperature field using a high-speed quadriwave lat-eral shearing interferometer (QWLSI) is proposed. The detailed theoretical derivation to express the wavefront recon-struct principle of the proposed method is presented. The comparison experiment with thermocAn approach to measure a high-dynamic two-dimensional (2D) temperature field using a high-speed quadriwave lat-eral shearing interferometer (QWLSI) is proposed. The detailed theoretical derivation to express the wavefront recon-struct principle of the proposed method is presented. The comparison experiment with thermocouples shows that the temperature field measurement using QWLSI has a precision of ±0.5 °C. An experiment for measuring the high-dynamic temperature field generated by an electrical heater is carried out. A 200 frame rate temperature field video with 512 × 512 resolution is obtained finally. Experimental results show that the temperature field measurement sys-tem using a QWLSI has the advantage of high sensitivity and high resolution..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 124 (2018)
Dynamic time-correlated single-photon counting laserranging
Huan PENG, Yu-rong WANG, Wen-dong MENG, Pei-qin YAN, Zhao-hui LI, Chen LI, Hai-feng PAN, and Guang and WU
We demonstrate a photon counting laser ranging experiment with a four-channel single-photon detector (SPD). The multi-channel SPD improve the counting rate more than 4×107 cps, which makes possible for the distance measurement performed even in daylight. However, the time-correlated single-photon counting (TCSPC) We demonstrate a photon counting laser ranging experiment with a four-channel single-photon detector (SPD). The multi-channel SPD improve the counting rate more than 4×107 cps, which makes possible for the distance measurement performed even in daylight. However, the time-correlated single-photon counting (TCSPC) technique cannot distill the signal easily while the fast moving targets are submersed in the strong background. We propose a dynamic TCSPC method for fast moving targets measurement by varying coincidence window in real time. In the experiment, we prove that targets with velocity of 5 km/s can be detected according to the method, while the echo rate is 20% with the background counts of more than 1.2×107 cps..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 129 (2018)
Positioning performance analysis of the time sum of ar-rival algorithm with error features
Feng-xun GONG, and Yan-qiu MA
The theoretical positioning accuracy of multilateration (MLAT) with the time difference of arrival (TDOA) algorithm is very high. However, there are some problems in practical applications. Here we analyze the location performance of the time sum of arrival (TSOA) algorithm from the root mean square error (RMSE) and geThe theoretical positioning accuracy of multilateration (MLAT) with the time difference of arrival (TDOA) algorithm is very high. However, there are some problems in practical applications. Here we analyze the location performance of the time sum of arrival (TSOA) algorithm from the root mean square error (RMSE) and geometric dilution of precision (GDOP) in additive white Gaussian noise (AWGN) environment. The TSOA localization model is constructed. Using it, the distribution of location ambiguity region is presented with 4-base stations. And then, the location performance analysis is started from the 4-base stations with calculating the RMSE and GDOP variation. Subsequently, when the location parameters are changed in number of base stations, base station layout and so on, the performance changing patterns of the TSOA location algorithm are shown. So, the TSOA location characteristics and performance are re-vealed. From the RMSE and GDOP state changing trend, the anti-noise performance and robustness of the TSOA lo-calization algorithm are proved. The TSOA anti-noise performance will be used for reducing the blind-zone and the false location rate of MLAT systems..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 133 (2018)
Passive measurement-device-independent quantum keydistribution with orbital angular momentum and pulse position modulation
Lian WANG, Yuan-yuan ZHOU, Xue-jun ZHOU, and Xiao and CHEN
Based on the orbital angular momentum and pulse position modulation, we present a novel passive measure-ment-device-independent quantum key distribution (MDI-QKD) scheme with the two-mode source. Combining with the tight bounds of the yield and error rate of single-photon pairs given in our paper, we conduct performancBased on the orbital angular momentum and pulse position modulation, we present a novel passive measure-ment-device-independent quantum key distribution (MDI-QKD) scheme with the two-mode source. Combining with the tight bounds of the yield and error rate of single-photon pairs given in our paper, we conduct performance analysis on the scheme with heralded single-photon source. The numerical simulations show that the performance of our scheme is significantly superior to the traditional MDI-QKD in the error rate, key generation rate and secure transmis-sion distance, since the application of orbital angular momentum and pulse position modulation can exclude the ba-sis-dependent flaw and increase the information content for each single photon. Moreover, the performance is im-proved with the rise of the frame length. Therefore, our scheme, without intensity modulation, avoids the source side channels and enhances the key generation rate. It has greatly utility value in the MDI-QKD setups..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 138 (2018)
A novel fusion method of improved adaptive LTP and two-directional two-dimensional PCA for face feature extraction
Yuan LUO, Bo-yu WANG, Yi ZHANG, and Li-ming and ZHAO
In this paper, under different illuminations and random noises, focusing on the local texture feature’s defects of a face image that cannot be completely described because the threshold of local ternary pattern (LTP) cannot be calculated adaptively, a local three-value model of improved adaptive local ternary pattern (In this paper, under different illuminations and random noises, focusing on the local texture feature’s defects of a face image that cannot be completely described because the threshold of local ternary pattern (LTP) cannot be calculated adaptively, a local three-value model of improved adaptive local ternary pattern (IALTP) is proposed. Firstly, the dif-ference function between the center pixel and the neighborhood pixel weight is established to obtain the statistical characteristics of the central pixel and the neighborhood pixel. Secondly, the adaptively gradient descent iterative function is established to calculate the difference coefficient which is defined to be the threshold of the IALTP opera-tor. Finally, the mean and standard deviation of the pixel weight of the local region are used as the coding mode of IALTP. In order to reflect the overall properties of the face and reduce the dimension of features, the two-directional two-dimensional PCA ((2D)2PCA) is adopted. The IALTP is used to extract local texture features of eyes and mouth area. After combining the global features and local features, the fusion features (IALTP+) are obtained. The experi-mental results on the Extended Yale B and AR standard face databases indicate that under different illuminations and random noises, the algorithm proposed in this paper is more robust than others, and the feature’s dimension is smaller. The shortest running time reaches 0.329 6 s, and the highest recognition rate reaches 97.39%..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 143 (2018)
Depth extraction method with high accuracy in integralimaging based on moving array lenslet technique
Yao-yao WANG, Juan ZHANG, Xue-wei ZHAO, Li-pei SONG, Bo ZHANG, and Xing and ZHAO
In order to improve depth extraction accuracy, a method using moving array lenslet technique (MALT) in pickup stage is proposed, which can decrease the depth interval caused by pixelation. In this method, the lenslet array is moved along the horizontal and vertical directions simultaneously for N times in a pitch to geIn order to improve depth extraction accuracy, a method using moving array lenslet technique (MALT) in pickup stage is proposed, which can decrease the depth interval caused by pixelation. In this method, the lenslet array is moved along the horizontal and vertical directions simultaneously for N times in a pitch to get N sets of elemental images. Computational integral imaging reconstruction method for MALT is taken to obtain the slice images of the 3D scene, and the sum modulus (SMD) blur metric is taken on these slice images to achieve the depth information of the 3D scene. Simulation and optical experiments are carried out to verify the feasibility of this method..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 148 (2018)
Application of robust face recognition in video surveil-lance systems
De-xin ZHANG, Peng AN, and Hao-xiang ZHANG
In this paper, we propose a video searching system that utilizes face recognition as searching indexing feature. As the applications of video cameras have great increase in recent years, face recognition makes a perfect fit for searching targeted individuals within the vast amount of video data. However, the performancIn this paper, we propose a video searching system that utilizes face recognition as searching indexing feature. As the applications of video cameras have great increase in recent years, face recognition makes a perfect fit for searching targeted individuals within the vast amount of video data. However, the performance of such searching depends on the quality of face images recorded in the video signals. Since the surveillance video cameras record videos without fixed postures for the object, face occlusion is very common in everyday video. The proposed system builds a model for oc-cluded faces using fuzzy principal component analysis (FPCA), and reconstructs the human faces with the available information. Experimental results show that the system has very high efficiency in processing the real life videos, and it is very robust to various kinds of face occlusions. Hence it can relieve people reviewers from the front of the moni-tors and greatly enhances the efficiency as well. The proposed system has been installed and applied in various envi-ronments and has already demonstrated its power by helping solving real cases..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 152 (2018)
Retinex based low-light image enhancement usingguided filtering and variational framework
[in Chinese], [in Chinese], [in Chinese], [in Chinese], and [in Chinese]
A new image enhancement algorithm based on Retinex theory is proposed to solve the problem of bad visual effect of an image in low-light conditions. First, an image is converted from the RGB color space to the HSV color space to get the V channel. Next, the illuminations are respectively estimated by the guided filteriA new image enhancement algorithm based on Retinex theory is proposed to solve the problem of bad visual effect of an image in low-light conditions. First, an image is converted from the RGB color space to the HSV color space to get the V channel. Next, the illuminations are respectively estimated by the guided filtering and the variational framework on the V channel and combined into a new illumination by average gradient. The new reflectance is calculated using V channel and the new illumination. Then a new V channel obtained by multiplying the new illumination and reflectance is processed with contrast limited adaptive histogram equalization (CLAHE). Finally, the new image in HSV space is converted back to RGB space to obtain the enhanced image. Experimental results show that the proposed method has better subjective quality and objective quality than existing methods..
Optoelectronics Letters
- Publication Date: Jan. 01, 1900
- Vol. 14, Issue 2, 156 (2018)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20