160-Gbit/s clock recovery using an electro-absorption modulator and 40-Gbit/s ETDM demultiplexer

Taorong GONG; Fengping YAN; Dan LU; Ming CHEN; Peng LIU; Peilin TAO; Muguang WANG; Tangjun LI; Shuisheng JIAN

doi:10.1007/s12200-009-0072-2

Journals >Frontiers of Optoelectronics >Volume 2 >Issue 4 >Page 389 > Article

Frontiers of Optoelectronics
Vol. 2, Issue 4, 389 (2009)

160-Gbit/s clock recovery using an electro-absorption modulator and 40-Gbit/s ETDM demultiplexer

Taorong GONG^1、2、*, Fengping YAN^1、2, Dan LU^1、2, Ming CHEN^1、2, Peng LIU^1、2, Peilin TAO^1、2, Muguang WANG^1、2, Tangjun LI^1、2, and Shuisheng JIAN^1、2

Author Affiliations

¹Key Laboratory of All-Optical Networks and Advanced Communication Networks, Ministry of Education, Beijing 100044, China

²Institute of Light Wave Technology, Beijing Jiaotong University, Beijing 100044, China

show less

DOI: 10.1007/s12200-009-0072-2 Cite this Article

Taorong GONG, Fengping YAN, Dan LU, Ming CHEN, Peng LIU, Peilin TAO, Muguang WANG, Tangjun LI, Shuisheng JIAN. 160-Gbit/s clock recovery using an electro-absorption modulator and 40-Gbit/s ETDM demultiplexer[J]. Frontiers of Optoelectronics, 2009, 2(4): 389 Copy Citation Text

show less

Abstract

A 10-GHz clock recovery from a 1610-Gbit/s optical time-division-multiplexed (OTDM) data stream is experimentally demonstrated using an electro-absorption modulator and 40-Gbit/s electric time-division-multiplexed (ETDM) demultiplexer. The recovered clock signal exhibits excellent stability, with root square (RMS) jitter of 328 and 345 fs corresponding to back-to-back and transmission over 100 km, respectively.

Keywords

160-Gbit/s clock recovery optical time-division-multiplexed (OTDM)

Download Citation

Save the article for my favorites

Paper Information