• Optoelectronics Letters
  • Vol. 9, Issue 2, 97 (2013)
En-ming XU1、*, Fei WANG2, and Pei-li LI1
Author Affiliations
  • 1School of Opto-Electronic Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210046,China
  • 2School of Opto-Electronic Information, Chongqing University of Technology, Chongqing 400054, China
  • show less
    DOI: 10.1007/s11801-013-2414-y Cite this Article
    XU En-ming, WANG Fei, LI Pei-li. A high-Q microwave photonic filter by using an SOA-based active mode-locked fiber ring laser[J]. Optoelectronics Letters, 2013, 9(2): 97 Copy Citation Text show less

    Abstract

    A high-Q microwave photonic filter using a semiconductor optical amplifier (SOA)-based mode-locking fiber ring laser is proposed, analyzed and experimentally demonstrated. The proposed microwave photonic filter can realize a high-Q frequency response, it is compact without an optical source, and it can be easily tuned by adjusting an optical variable delay line in a ring cavity. A result with a Q-factor of about 236 and a rejection ratio of about 45 dB is obtained. The measured results and the theoretical estimations agree very well.
    XU En-ming, WANG Fei, LI Pei-li. A high-Q microwave photonic filter by using an SOA-based active mode-locked fiber ring laser[J]. Optoelectronics Letters, 2013, 9(2): 97
    Download Citation