Journals >Journal of Terahertz Science and Electronic Information Technology
Contents
2023
Volume: 21 Issue 6
12 Article(s)
Export citation format
Communication signal modulation recognition method based on complex network and attention mechanism
XIAO Sa, MA Mohan, AI Jiajun, HU Huachao, WANG Keyong, and ZHANG Wenzhong
As an important means of managing and monitoring the electromagnetic spectrum, communication signal modulation recognition shows important research value and application prospects. A signal modulation recognition method based on complex neural network is proposed by using the frequency domain information of modulated sAs an important means of managing and monitoring the electromagnetic spectrum, communication signal modulation recognition shows important research value and application prospects. A signal modulation recognition method based on complex neural network is proposed by using the frequency domain information of modulated signals for modulation recognition. Firstly, the I and Q signals are combined into complex signals, and the real and imaginary parts obtained are combined as the data set of the input network after Fast Fourier Transform(FFT). Secondly, a complex neural network structure is designed, and an attention mechanism is introduced to improve the network structure. Finally, the simulation results show that the proposed method can effectively identify nine modulation modes, and the average correct recognition rate reaches 96.33% when the signal-to-noise ratio is 6 dB..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 745 (2023)
Extraction of complex permittivity in terahertz band based on NR iterative method
JIA Rui, XU Jing, ZHANG Zhenwei, HUANG Hui, GAO Xiaoqiang, LIU Lin, MIAO Yinxiao, ZHANG Cunlin, and ZHAO Yuejin
It is important to obtain the dielectric constant of materials in terahertz band for applications of 6G communication, radar remote sensing, detection and imaging. In this paper, the complex permittivity of samples is extracted based on the Newton Raphson(NR) iterative method, of which the influence of the initial valuIt is important to obtain the dielectric constant of materials in terahertz band for applications of 6G communication, radar remote sensing, detection and imaging. In this paper, the complex permittivity of samples is extracted based on the Newton Raphson(NR) iterative method, of which the influence of the initial value is analyzed. A set of 8f quasi optical system consisting of Vector Network Analyzer(VNA), spread spectrum module and four parabolic mirrors is built in 325~500 GHz(Yband) to realize the free space measurement of scattering parameter S 21. The relationship between complex permittivity and S 21 is derived from the electromagnetic wave transmission model. The complex permittivity spectra of Teflon, ABS and PMMA samples are extracted by iterative method. The results are consistent with other literatures, which verify the effectiveness of the proposed system and the method..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 759 (2023)
Design and application of optical fiber communication system in photoelectric tracking equipment
ZHANG Wenxin, CUI Yongqiang, and LI Long
The optical fiber communication technology is adopted to transmit data image with high frame rate and high resolution in order to improve the anti-interference, transmission speed and bit error rate of the photoelectric tracking equipment. The long-distance transmission technology is mainly utilized in this design for The optical fiber communication technology is adopted to transmit data image with high frame rate and high resolution in order to improve the anti-interference, transmission speed and bit error rate of the photoelectric tracking equipment. The long-distance transmission technology is mainly utilized in this design for Cameralink high-speed digital images, a full-mode Cameralink digital image optical transceiver end is studied based on Field-Programmable Gate Array(FPGA), including FPGA chip, Cameralink interface module, Small Form-factor Pluggables(SFP) optical module, Cameralink decoding module, mode control module. The functions of each module are mainly as follows: Cameralink interface module is utilized to receive Cameralink information and send the received information to Cameralink decoding module; Cameralink decoding module decodes the serial data and sends it to the serial-parallel signal conversion module; the signal conversion module performs serial-to-parallel conversion on the received digital image signal to form a serial data stream; the SFP optical module receives the serial data stream and converts it into an optical fiber signal; the mode control module controls the working mode of the transmitting end. This design can realize the data transmitting and receiving of infrared image in resolution of 640×512 and a frame rate of 100 Hz. It has finished several environment tests and is applied in engineering..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 782 (2023)
Design of Unmanned Aerial Vehicle integrated tracking telemetry and command terminal
NIU Xue
Low integration and poor interoperability of existing unmanned aerial vehicle tracking telemetry and command terminals could not satisfy the development trends of modularization, integration and universality of Unmanned Aerial Vehicle(UAV) in the future. An integrated design which can be applied to both airborne and grLow integration and poor interoperability of existing unmanned aerial vehicle tracking telemetry and command terminals could not satisfy the development trends of modularization, integration and universality of Unmanned Aerial Vehicle(UAV) in the future. An integrated design which can be applied to both airborne and ground UAV Tracking Telemetry and Command(TT&C) terminals is proposed. It adopts the mode of combing "high-integrated system" with "comprehensive reconfigurable function". Standard modules are utilized to build an open hardware platform, which can achieve highintegrated processing capability. The dynamic reconstructed loading mechanism of communication waveform is designed to complete the online update and upgrade of the communication system in the universal TT&C link. The research of standardized communication protocol provides the interconnection basis for different types of TT&C links. The experimental results show that the design can complete the dynamic reconstruction in a few minutes and effectively support different missions..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 788 (2023)
An improved MHT method with clutter estimation based on adaptive Gaussian Mixture Model
LI Xudong, WANG Ziwei, ZHANG Yuxi, and LU Xiaoke
In the traditional Multiple Hypothesis Tracker(MHT) algorithm, it is usually assumed that the clutter intensity is known a priori. When the clutter of observation scene is unknown and spatially variable, the performance of the tracking algorithm drops sharply. To solve this problem, an improved MHT method with clutter In the traditional Multiple Hypothesis Tracker(MHT) algorithm, it is usually assumed that the clutter intensity is known a priori. When the clutter of observation scene is unknown and spatially variable, the performance of the tracking algorithm drops sharply. To solve this problem, an improved MHT method with clutter estimation based on adaptive Gaussian Mixture Model(GMM) is proposed. Firstly, the adaptive GMM is utilized to fit the spatial distribution of unknown clutter, and the clutter intensity in the gate is estimated adaptively. Then, it is applied to the MHT tracker to effectively improve the accuracy of track score calculation and optimal hypothetical track estimation, so as to realize stable tracking in unknown clutter scene. Simulation results show that the proposed algorithm achieves better data association accuracy and track maintenance performance than the standard MHT algorithm and the MHT-GMM algorithm in unknown clutter observation scene..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 794 (2023)
Multi-band channel characterization for high-speed train station scenario
CHEN Siqing, and LI Kai
The overall construction of the intelligent railways should be promoted in order to facilitate the digital transformation of railways. Taking the Xiamen North Station as the scenario and combining with the actual situation of China's railways, the channel characteristics of Global System for Mobile Communications-RThe overall construction of the intelligent railways should be promoted in order to facilitate the digital transformation of railways. Taking the Xiamen North Station as the scenario and combining with the actual situation of China's railways, the channel characteristics of Global System for Mobile Communications-Railway(GSM-R), 5G-Railway(5G-R) and millimeter wave communication systems based on high-performance ray tracing at the four frequency bands of 932 MHz, 2.1 GHz, 41 GHz and 84.25 GHz are studied. Relying on high-performance Ray Tracing(RT) simulation, the radio propagation characteristics of high-speed rail station scenarios under different frequency bands are accurately modeled, and then the multi-dimensional channel characteristics under multi-band multistandard are compared and studied. The outcomes indicate that as the radio frequency increases, the wireless signal coverage becomes smaller. And the less the multipaths generated by scatterers, the weaker the dispersion of multipath signal will be in the time and space domains. The research can provide theoretical basis and data support for the design and optimization of the railway dedicated mobile communication system for the high-speed railway station scenario..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 801 (2023)
Propagation analysis of Ka-band electromagnetic wave in atmospheric plasma
ZHENG Qianglin, YAN Eryan, YANG Hao, NIE Yong, and BAO Xiangyang
S-band High Power Microwave(HPM) is employed to produce the plasma in the atmosphere environment simulation chamber. The experiment researches on Ka-band microwave propagating characteristics in atmospheric plasma are performed, and the Ka-band microwave attenuation characteristics of atmospheric plasma are obtained. SS-band High Power Microwave(HPM) is employed to produce the plasma in the atmosphere environment simulation chamber. The experiment researches on Ka-band microwave propagating characteristics in atmospheric plasma are performed, and the Ka-band microwave attenuation characteristics of atmospheric plasma are obtained. Some novelty propagation characteristics in the interaction of electromagnetic wave and atmospheric plasma are found: the electromagnetic wave transmission signal enhancement effect appears oscillation on Ka-band; the maximum value of propagation enhancement is almost 2 times, and the period of oscillation is 80 MHz. The phenomenon of propagation enhancement also occurs with the enhancing of buffer gas pressure, but the amplitude decreases. The reasons of propagation enhancement are analyzed. The research results provide important technical support for the application of plasma in stealth and black barrier communications..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 809 (2023)
Design of bandpass filter based on the structure of CSRR_CRLH TL
SHAO Jianxing
A Composite Right/Left-Handed Transmission Line(CRLH TL) structure based on probeloaded Complementary Split-Ring Resonator(CSRR) is proposed in this paper. Based on the resonant characteristic of CSRR and CRLH structure, the transmission zeros are introduced and the size of the filter is reduced by extending the lengthA Composite Right/Left-Handed Transmission Line(CRLH TL) structure based on probeloaded Complementary Split-Ring Resonator(CSRR) is proposed in this paper. Based on the resonant characteristic of CSRR and CRLH structure, the transmission zeros are introduced and the size of the filter is reduced by extending the length of CRLH coupling slot and by increasing the number of shortcircuit probes in CSRR. The filter is designed with wide bandwidth, high selectivity and miniaturization. The prototype of the band-pass filter is fabricated. The overall size of the prototype is 30 mm×15 mm× 1.35 mm. The test results show that the center frequency and insertion loss of the filter are 6.6 GHz and 0.65 dB respectively, and the 3 dB bandwidth of the filter is 9.3 GHz. The filter shows a good application value in microwave systems such as wireless communication and navigation..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 814 (2023)
PCB crosstalk prediction based on machine learning
CHEN Xingyu, SHI Dan, and WANG Yunpeng
With the rapid improvement of clock frequency in electronic system, crosstalk has become one of the problems that Printed Circuit Board(PCB) designers must concern. Although the design cost has been cut to a certain degree, it still takes a lot of time to simulate the crosstalk on PCB even with the help of high-speed cWith the rapid improvement of clock frequency in electronic system, crosstalk has become one of the problems that Printed Circuit Board(PCB) designers must concern. Although the design cost has been cut to a certain degree, it still takes a lot of time to simulate the crosstalk on PCB even with the help of high-speed circuit simulation software. Aiming to improve the efficiency of PCB crosstalk prediction, a new data structure is proposed to describe PCBs. The factors that cause crosstalk on PCB are comprehensively analyzed, and a PCB crosstalk prediction system is built by using Natural Language Processing(NLP), which reduces the time for crosstalk prediction to the magnitude of seconds and achieves 73.2% accuracy..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 819 (2023)
Electromagnetic radiation of 5G base station
LUO Yong, SHI Dan, WANG Guan, and LIU Xiaoyong
Based on key technologies such as 5G base station forward power control and beam forming, the electromagnetic radiation test scheme for 5G base station under the condition of single user is designed. According to the regular layout of electromagnetic radiation power density decreasing with the square of distance, the tBased on key technologies such as 5G base station forward power control and beam forming, the electromagnetic radiation test scheme for 5G base station under the condition of single user is designed. According to the regular layout of electromagnetic radiation power density decreasing with the square of distance, the test efficiency of macro base station can be improved to some extent. In addition, field measurement of the proposed monitoring scheme shows that the monitoring results are far less than the limit value of International Commission on Non-Ionizing Radiation Protection(ICNIRP) standard, indicating that the electromagnetic radiation level of 5G base station is generally controllable. Finally, High Frequency Structure Simulator(HFSS) is adopted to design the 5G base station antenna model to obtain the large-scale Multiple-Input Multiple-Output(MIMO) antenna array direction map, and the scene is built based on the electromagnetic parameter analysis of the actual scene. The electromagnetic radiation of 5G base station is predicted by ray tracing algorithm. The prediction results show little error compared with the monitoring results, which proves the reliability of the prediction method..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 826 (2023)
Micro-Doppler clutter suppression based on sparsity adaptive matching pursuit algorithm
CHEN Mei, WAN Xianrong, ZHAN Weijie, ZHANG Xun, and LIU Yuqi
The mechanical vibration or rotation of the target or its components produces the micro-Doppler effect, which plays an important role in target classification and recognition. However, the micro-Doppler effect of many objects in the environment (such as wind turbines, air conditioners, etc.) is like time-varying clutteThe mechanical vibration or rotation of the target or its components produces the micro-Doppler effect, which plays an important role in target classification and recognition. However, the micro-Doppler effect of many objects in the environment (such as wind turbines, air conditioners, etc.) is like time-varying clutter to the radar system, leading to false alarms. In this paper, aiming at the problem that micro-Doppler clutter may interfere with passive radar target detection, a micro-Doppler clutter suppression method based on the improved Sparsity of Adaptive Matching Pursuit (SAMP) is proposed. Considering the sparse characteristics of the micro-Doppler clutter, this problem can be transformed into a sparse signal representation problem, and the purpose of suppressing the micro-Doppler clutter is achieved by separating the signal. Compared with the original SAMP algorithm, the improved SAMP algorithm can quickly stop iteration after the residual reaches the adaptive threshold. Simulation and measured data verify the effectiveness of the proposed method..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 830 (2023)
Iterative Closest Point registration algorithm based on intensity feature matching of TOF point cloud
HAN Yifei, LIU Yue, ZHENG Fu, WANG Yanqiu, and SUN Zhibin
There are many noise points in the 3D point cloud dala obtained by Time Of Flight (TOF) and the proportion of real objects in the point cloud is small. An iterative closest point registration algorithm based on intensity feature matching is proposed for TOF point cloud data. Firstly, the intensity feature is employed tThere are many noise points in the 3D point cloud dala obtained by Time Of Flight (TOF) and the proportion of real objects in the point cloud is small. An iterative closest point registration algorithm based on intensity feature matching is proposed for TOF point cloud data. Firstly, the intensity feature is employed to extract the effective region, and then the effective region is configured. Finally, the change matrix of the effective region is utilized to register the whole point cloud data. Experimental results show that this method can effectively improve the registration accuracy of real target point cloud without affecting the registration speed..
Journal of Terahertz Science and Electronic Information Technology
- Publication Date: Jan. 01, 1900
- Vol. 21, Issue 6, 838 (2023)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20