2D-SiCf/SiC Interlaminar Mode I Fracture Testing and Characterization

Weigang SHI; Chao ZHANG; Mei LI; Jing WANG; Chengyu ZHANG

doi:10.15541/jim20230237

[1] S Y ZHANG, H J LI, K Z LI et al. Interlayer crack extension mode in laminated carbon/carbon composites. Journal of Inorganic Materials, 91(2002).

[2] SR CHOI, RW KOWALIK. Interlaminar crack growth resistances of various ceramic matrix composites in mode I and mode II loading. Journal Engineer Gas Turbines Power, 130: 031301(2008).

[4] G OJARD, T BARNETT, M DAHLEN et al. Mode I interlaminar fracture toughness testing of a ceramic matrix composite. The 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC), Daytona Beach, Florida.

[7] T KRAUSE, K TUSHTEV, D KOCH et al. Interlaminar mode I crack growth energy release rate of carbon/carbon composites. Engineering Fracture Mechanics, 100: 38(2013).

[8] S HOFMAN. Mode I delamination onset in carbon fiber reinforced SiC: double cantilever beam testing and cohesive zone modelling. Engineering Fracture Mechanics, 182: 506(2017).

[9] R S KUMAR. Crack-growth resistance behavior of mode-I delamination in ceramic matrix composites. Acta Materialia, 131: 511(2017).

[10] T JIANG, Z GUAN, Z LI et al. Experimental and numerical study on mode I interlaminar fracture toughness of lightly stitched ceramic-matrix composites. Results in Physics, 19: 1(2020).

[11] R S KUMAR. Effects of randomly distributed defects on Mode-I interlaminar fracture of composite materials. Engineering Fracture Mechanics, 248: 107699(2021).

[12] W XU, J DING, J GE et al. Determination of mode I interlaminar fracture toughness of C/SiC composite using taped double cantilever beam and J integral. Journal of Applied Mechanics, 024501(2022).

[13] R MANSOUR, G N MORSCHER. Mode I interlaminar fracture behavior of 2D woven ceramic matrix composites. International Journal of Applied Ceramic Technology, 735(2019).

[14] M MAY. Measuring the rate-dependent mode I fracture toughness of composites-a review. Composites Part A: Applied Science and Manufacturing, 81: 1(2016).

[15] R MANSOUR, M KANNAN, G N MORSCHER et al.

[16] R MANSOUR, Y P SINGH, M KANNAN et al. Study of interlaminar fracture properties of ceramic matrix composites at room and elevated temperatures. Turbo Expo: Power for Land. Sea, and Air. American Society of Mechanical Engineers(2017).

[17] Y P SINGH, R MANSOUR, G N MORSCHER. Combined acoustic emission and multiple lead potential drop measurements in detailed examination of crack initiation and growth during interlaminar testing of ceramic matrix composites. Composites Part A: Applied Science and Manufacturing, 97: 93(2017).

[18] F ABDI, J AHMAD, S DORMOHAMMADI et al. Development of ASTM Test Standards for the Mode I Interlaminar Fracture Toughness (G_IC—Crack Growth Resistance) of Ceramic Matrix Composites. International Gas Turbine Institute, Oslo, Norway.

[19] W G SHI, C ZHANG, B WANG et al. Mode I interlaminar fracture toughness of two-dimensional continuous fiber reinforced ceramic matrix composites using wedge-loaded double cantilever beam method. Composites Part A: Applied Science and Manufacturing, 168: 107466(2023).

[20] M F KANNINEN. An augmented double cantilever beam model for studying crack propagation and arrest. International Journal of Fracture, 83(1973).

[21] International ASTM. Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites:ASTM D5528-13. West Conshohocken(2013).