• Bulletin of the Chinese Ceramic Society
  • Vol. 42, Issue 11, 3853 (2023)
LI Yan1, LI Wen2, ZHANG Huajian3, HAN Lebing2, TONG Teng4, LI Xiaobo4, and YUAN Siqi4
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • 4[in Chinese]
  • show less
    DOI: Cite this Article
    LI Yan, LI Wen, ZHANG Huajian, HAN Lebing, TONG Teng, LI Xiaobo, YUAN Siqi. Development and Full-Scale Tests of Modified Polyurethane-Based Seamless Expansion Joints for Bridge[J]. Bulletin of the Chinese Ceramic Society, 2023, 42(11): 3853 Copy Citation Text show less
    References

    [3] MOGAWER W SAUSTERMAN A J. Evaluation of asphaltic expansion joints[R]. Department of Civil and Environmental EngineeringUniversity of Massachusetts Dartmouth2004.

    [5] CHEN QWANG C HLI Y Wet al. Performance development of polyurethane elastomer composites in different construction and curing environments[J]. Construction and Building Materials2023365: 130047.

    [6] HUSSAIN H KZHANG L ZLIU G W. An experimental study on strengthening reinforced concrete T-beams using new material poly-urethane-cement (PUC)[J]. Construction and Building Materials201340: 104-117.

    [7] WANG Y QSUN Q SDING H Jet al. Investigation of interfacial bonding properties of polyurethane concrete and cement concrete/steel reinforcement[J]. Advances in Materials Science and Engineering20222022: 1-28.

    [9] ZHANG K XSUN Q S. The use of wire mesh-polyurethane cement (WM-PUC) composite to strengthen RC T-beams under flexure[J]. Journal of Building Engineering201815: 122-136.

    [13] OLSZEWSKI AKOSMELA PPIASECKI Aet al. The impact of isocyanate index and filler functionalities on the performance of flexible foamed polyurethane/ground tire rubber composites[J]. Polymers202214(24): 5558.

    [14] SCHUTT N LCAMPBELL L GRUDOLPH J Jet al. Effect of storage time and temperature on the setting times of two composite resins[J]. The Journal of Prosthetic Dentistry198247(4): 407-410.

    [15] American Society for Testing and Materials. Standard test method for tensile properties of plastics: ASTM D638[S]. West Conshohocken: ASTM International2014.

    [16] American Society for Testing and Materials. Test method for rubber property-durometer hardness: ASTM D2240-91[S]. West Conshohocken: ASTM International1995.

    [17] American Society for Testing and Materials. Standard test method for water absorption of plastics: ASTM D570-98[S]. West Conshohocken: ASTM International2018.

    [18] BOUBAKRI AHADDAR NELLEUCH Ket al. Influence of thermal aging on tensile and creep behavior of thermoplastic polyurethane[J]. Comptes Rendus Mécanique2011339(10): 666-673.

    [19] American Society for Testing and Materials. Standard test method for rubber property-tear resistance: ASTM D624[S]. West Conshohocken: ASTM International1981.

    [22] European Organization for Technical Approvals. Guideline for European technical approval of expansion joints for road bridges: ETAG 032[S]. Brussels: European standards technical committee2013.

    LI Yan, LI Wen, ZHANG Huajian, HAN Lebing, TONG Teng, LI Xiaobo, YUAN Siqi. Development and Full-Scale Tests of Modified Polyurethane-Based Seamless Expansion Joints for Bridge[J]. Bulletin of the Chinese Ceramic Society, 2023, 42(11): 3853
    Download Citation