Contents
2022
Volume: 34 Issue 9
25 Article(s)

Export citation format
Advanced Interdisciplinary Science
Experimental study on spores treatment by array plasma jet
Hongyu Chen, Yong Zhang, Zhen Liu, and Keping Yan
In recent years, with the advancement in the field of biomedical applications, atmospheric pressure non-thermal plasma technology has shown many advantages in disinfection and sterilization. In terms of its application, the key lies in how to easily generate a large-area, uniform and stable plasma. In this work, a set
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 099001 (2022)
Design of navigation antenna with adjustable beam forming
Kaixiang Zhou, Jianfeng Yuan, and Xuelin Yuan
A new idea of adjusting half-power beam width is applied to design a navigation antenna of Beidou-2 B3 band, which can realize beam width transformation and apply to different beam forming scenes. The microstrip patch array is modeled in HFSS simulation software. On the basis of keeping the right-handed circular polari
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 099002 (2022)
Cover and Contents
[in Chinese]
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 1 (2022)
High Power Microwave Technology
Method for identifying TE11 mode in TM01/TE11 mixed mode system with eight-hole coupler
Jie Ren, Ming Weng, Le Lei, Shu Lin, Meng Cao, and Yonggui Zhai
In high power microwave transmission systems, over-mode waveguides are often used to improve power capacity and efficiency, thus the mixed modes of TM01 and TE11 often appear in circular waveguides. In this paper, the method of extracting the mixing ratio and polarization angle of the TE11 mode is analyzed and studied
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 093001 (2022)
Electric field probe calibration and improvement method based on open TEM cell
Haoyan Wang, Junna Li, Yuhan Gong, and Jian Liu
Most of the calibration experiments of the electric field probe only consider the influence of the structure and performance of the TEM cell. In the calibration experiment, the placement of the probe makes the calibration result produce a large deviation. Therefore, the main reason for the error is the size of the prob
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 093002 (2022)
Pulsed Power Technology
All-solid-state inductive energy storage pulse forming line nanosecond short pulse power modulator
Jianhao Ma, Liang Yu, Jiuxin Ma, Dazhao He, Shoulong Dong, and Chenguo Yao
The all-solid-state inductive energy storage pulse forming line modulator is a brand-new solution to achieve a high repetition rate, high voltage gain, and short pulse output. However, due to the non-ideal dynamic characteristics of the switch and the fixed physical space size of the transmission line, it's difficu
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095001 (2022)
Design of a vacuum interface of a microsecond timescale HPM diode with guiding magnetic field
Hanwu Yang, Tao Xun, Jingming Gao, and Zicheng Zhang
Long pulse high power pulse driver in the microsecond range is an important platform for conducting high power microwave (HPM) device studies and one of the key technologies is to prohibit surface flashover of the vacuum diode interface under the conditions of long pulse duration and the presence of guiding magnetic fi
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095002 (2022)
LD triggered three-electrode gas switch based on photoconductive semiconductor
Jiabin Fu, Lingyun Wang, Yang He, Chuanjun Feng, and Weiping Xie
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095003 (2022)
A multi-channel high speed data acquisition system software
Wenyuan Zhou, Yixiang Hu, Jiahui Yin, Weixi Luo, and Xinjun Zhang
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095004 (2022)
Simulation research on pulse steepening technology based on ferrite transmission line
Jinbo Jiang, Yu Cao, Zheng Luo, Wanchen Cai, Jiadong Wang, and Tingqiang Cheng
The pulse steepening technology of ferrite transmission lines can realize high-frequency and high-power fast front pulse output and has the advantages of solid-state and compactness. It has been widely used in high-power microwave sources. The simulation calculation of pulse steepening characteristics of ferrite transm
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095005 (2022)
Low-energy pulsed spark discharge characteristics of pin-plate structure in water
Zhi Wang, Ruoyu Han, Xiandong Li, Pengyu Chen, Yizhang Li, and Jinsong Miao
The influence of electric pulse parameters on spark discharge characteristics in water was studied. A solid-state repetitive nanosecond pulse power supply with adjustable parameters was adopted. The discharge load was a pin-plate structure placed in water (the distance between the pin and the plate set to 1 mm). The ex
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095006 (2022)
Influence of insulation system on surface flashover voltage in Blumlein main switch
Qingzhou Wu, Jin Li, Yuan Li, Ziping Huang, Xiaobing Jing, Feng Gao, Mao Chen, and Bangliang Liu
As a key component, the Blumlein switch is widely used in large pulsed power devices such as high-current electron linear induction accelerators. The insulator in the main switch plays the role of isolating water or oil and gas. When the equipment is subjected to high voltage pulse for a long time or high frequency, th
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095008 (2022)
Analytical method of triplate transmission lines configuration
Chongyang Mao, Guanqiong Wang, and Xiaoguang Wang
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095010 (2022)
A driver circuit to adjust the pulse edges of Marx generators
Rui Zhang, Junfeng Rao, Zi Li, Song Jiang, and Yonggang Wang
A novel driving circuit for the adjustment of pulse edges in Marx generators is proposed. By adjusting the driving voltage amplitudes of the charge and discharge switches, the Miller plateau time is controlled in the driving circuit. Then the turn-on speed of the switches and the pulse edges of high-voltage pulses are
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095011 (2022)
Simulation and experimental research of pulse transformer reset system based on energy recovery principle
Qingfeng Wang, Yongwang Che, Xiangqiang Li, Jianqiong Zhang, and Xianfeng Tang
To improve the core utilization rate of pulse transformer in pulse power system, a pulse transformer reset system based on energy recovery principle is proposed. Firstly, according to the magnetic core hysteresis loop, the change process of the magnetic induction intensity of the reset system based on the energy recove
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095012 (2022)
Special Power Supply Technology
Development of a 240 kJ modularized pulsed power supply
Songjie Li, Juan Zhao, Chuanhui Kang, Yupeng Huang, Weijun Deng, Jinshui Xiao, Mingjun Ding, Bo Li, Jian Guan, Aohua Mao, Hongtao Li, Peng E, and Xun Ma
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095015 (2022)
Design of bipolarity DC high voltage charging power supply
Bo Li, Juan Zhao, Hongtao Li, Xin Zhang, Xun Ma, Songjie Li, Jinshui Xiao, Yupeng Huang, and Chuanhui Kang
High Power Laser and Particle Beams
  • Publication Date: Sep. 15, 2022
  • Vol. 34, Issue 9, 095016 (2022)