Contents
2018
Volume: 47 Issue 12
59 Article(s)

Export citation format
[in Chinese]
Magnetostrictive coefficient measurement method combined linear frequency modulation with laser heterodyne
Bai Yan, Yang Chunmei, Yang Liusong, and Tian He
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1217002 (2018)
Design of space target acquisition method for three-axis photoelectric tracking system
Chen Deyi, Liu Wansheng, He Dong, Chen Jun, and Shi Yixiang
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1217003 (2018)
Scattering properties of rough metal surface in terahertz region
Shi Jie, Zhong Kai, Liu Chu, Wang Maorong, Qiao Hongzhan, Li Jining, Xu Degang, and Yao Jianquan
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1217004 (2018)
On-orbit real time installation matrix calibration method for high accuracy star trackers
Li Xinpeng, Sun Shaoyong, Zheng Xunjiang, Mao Xiaonan, Ye Zhilong, and Sun Shuodong
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1217006 (2018)
Research on frequency stabilization of laser feedback birefringence measurement system
Deng Yong, Song Jianjun, Wang Chenxu, and Yang Yuan
Natural birefringent elements such as wave plates and crystals are widely used in various optical systems. During the processing and coating process, residual stress will be introduced into the common optical components, causing birefringence. The birefringence has influences on performances of whole optical systems, w
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1217007 (2018)
Vehicle integrated navigation system based on two dimensional laser Doppler velocimeter
Chen Hongjiang, Nie Xiaoming, and Wang Mengcheng
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1217008 (2018)
[in Chinese]
Heat transfer influence on grid lines of triple-junction solar cell irradiated by laser
Zhou Guanglong, Xu Jianming, Lu Jian, Li Guangji, and Zhang Hongchao
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1220001 (2018)
Electrically pumped ultraviolet random lasing from island-like polycrystalline ZnO film
Liu Chunyang, Ju Ying, Wang Shuai, and Mu Yining
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1220002 (2018)
[in Chinese]
Extraction of spatial heterodyne spectroscopy target based on empirical mode decomposition and regression analysis
Ye Song, Li Yuanzhuang, Sun Yongfeng, Gao Fengyan, Wang Xinqiang, Wang Jiejun, Zhang Wentao, and Wang Fangyuan
The algorithm was proposed based on the empirical mode decomposition and regression analysis to extract and identify the characteristic information of spatial heterodyne spectroscopy. The spectrum which was obtained by pre-processing the original probe data was decomposed into several intrinsic mode function components
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1223001 (2018)
[in Chinese]
Mode converter based on fiber grating to eliminate intermode interference phenomenon
Zhao Runhan, Meng Xinyu, Zhao Yunhe, Si Xiaolong, and Liu Yunqi
Optical fiber communication technology has occupied the main position of the current communication transmission. But the single mode optical fiber (SMF) communication system based on wavelength-division-multiplexing (WDM) technology is now facing severe channel capacity crisis. Therefore, mode-division-multiplexing (MD
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1222001 (2018)
Research on ultraviolet non-line-of-sight diversity reception technology in weak turbulence
Zhao Taifei, Wang Xiufeng, Wang Hua, Yu Xuxu, and Li Yongming
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1222002 (2018)
Temperature characteristics of broad-band fiber-optic λ/4 waveplate
Xiao Yueyu, Jiang Xiaoyong, and Chen Hua
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1222003 (2018)
[in Chinese]
Optical design of miniaturized and large field of view off-axis optical system based on freeform surface
Zhao Yuchen, He Xin, Zhang Kai, Liu Qiang, Cui Yongpeng, and Meng Qingyu
With the increasing development of space technology, space optical system with the characteristics of high-performance, miniaturization has become a new hotspot research in space optical fields. Off-axis three-mirror optical system has the advantage of high quality image, large field of view and high level of lightweig
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1218001 (2018)
Double wavelength combination and focus system of high power laser diodes stack
Mi Qinggai, Wang Xubao, and Xiao Rongshi
A double wavelength combination and long focal length optical system was designed to combine and focus two direct high power laser diodes stacks with different wavelengths for laser material processing. First of all, the two LD stacks were collimated by fast and slow axis collimator respectively. Second, the two LD sta
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1218003 (2018)
Design and experiment of precision focusing mechanism of space remote sensing camera with lightweight and miniaturization
Wang Kai, Yan Yong, Xu Minglin, Zuo Yudi, Jin Guang, and Tao Shuping
Space remote sensing camera in the launch process and its in-orbit operation, due to environment change of atmospheric pressure, temperature, mechanics, results in focal plane defocus. In order to meet the requirements of imaging quality, the focal plane must be corrected before putting it into use. For meeting the fea
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1218004 (2018)
Effect of thermal control of thermal boundary layer on image quality with large-aperture primary mirror
Tan Yufeng, Wang Jihong, Ren Ge, Ren Xiaoli, Yang Xinxin, Xie Zongliang, and He Bi
With the increase of the aperture of the telescope, the inertia of the primary mirror increases sharply. Both of the temperature difference with optical surface and ambient air and turbulence fluctuation at thermal boundary layer result in heavy mirror seeing, directly influence the optical quality. A method based on c
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1218005 (2018)
Optical design of broad-area laser diode beam-shaping system
Gao Zhihong, Zhang Wenxi, Kong Xinxin, and Feng Qibo
The broad-area laser diode is widely used as a pump source in all-solid-state lasers, while the beam of semiconductor laser diode have to be shaped because of large divergence angle and the asymmetry of the narrow rectangular cross section in fast-axis and slow-axis directions. The output laser spot of area-broad diode
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1218006 (2018)
Optical system of imaging spectrometer in short-wave infrared with high NA for precision agriculture observation
Yu Lei, Chen Sujuan, Chen Jiexiang, and Xue Hui
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1218007 (2018)
[in Chinese]
Spatiotemporal distributions of 0.4-14 μm ocean surface albedo over China Sea areas
Cui Shengcheng, Zhu Wenyue, Li Xuebin, Luo Tao, Zhang Zihan, Zhang Wenzhong, Han Lu, and Lu Wenqiang
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1212001 (2018)
[in Chinese]
Non-uniformity correction algorithm based on weighted guided filter and temporal high-pass filter
Qian Runda, Zhao Dong, Zhou Huixin, Yu Junna, Wang Shicheng, and Rong Shenghui
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1204001 (2018)
Influence of thickness of hemispherical dome on aerodynamic thermal radiation
Wang Hui, Dang Fanyang, Zhang Rongda, Ming Yue, and Fan Zhigang
Aerodynamically heated high temperature dome will produce strong infrared radiation. In some serious cases when the probe reaches saturation, the detecting precision of the seeker for target can be severely affected. In order to reduce the aerodynamic thermal radiation of the dome, a mathematical model of aerodynamic t
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1204002 (2018)
Evaluation of interference effects of smokescreen on IR imaging
Han Hongwei, and Zhang Xiaohui
Smokescreen is effective to counter infrared reconnoiter and guide. In order to assess and evaluate the ability of smokescreen to interfere IR imaging quantificationally, study was carried out both in theory and in experiment. Firstly, based on discrimination distance rule, the equation to calculate the view range of I
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1204004 (2018)
Study on short pulse signal amplification of a microchannel plate in a saturation mode
Xie Yuntao, hang Yujun, Wang Xi, and Sun Xiaoquan
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1204005 (2018)
[in Chinese]
Surface mechanical properties of 2024-T351 aluminum alloy strengthened by cryogenic laser peening
Xu Yangyang, Zhou Jianzhong, Tan Wensheng, Meng Xiankai, Sheng Jie, Huang Shu, and Sun Yunjie
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206002 (2018)
Research on laser paint removing of aircraft surface
Jiang Yilan, Ye Yayun, Zhou Guorui, Wang Haijun, Liao Wei, Yuan Xiaodong, and Jia Baoshen
Laser cleaning technology, which is environment-friendly, has a wide range of application prospects in remanufacturing, micro-mechanical system (MEMS) and ultra-precision machining. Laser paint removing of aircraft surface is one of the important branches of the technology of laser cleaning. A high repetition frequency
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206003 (2018)
Precision analyses of point-of-burst control based on laser fuze
Li Yuzhao, Liu Yan, Chen Xi, Sha Sha, and Guo Juan
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206004 (2018)
Thermal load management of laser cooling of Yb3+: LuLiF4 crystal
Luo Hao, Zhong Biao, Lei Yongqing, Shi Yanling, and Yin Jianping1
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206005 (2018)
Method of eliminating saturation drift error of laser fuze
Zhang Leqi, Zha Bingting, and Zhang He
It is discovered that the jump point of the constant fraction discrimination(CFD) method moves forward when the laser receiver is saturated. In order to guarantee the range precision of laser fuze in short range, an error compensation algorithm based on the echo power equation was proposed for results correction. First
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206006 (2018)
Numerical simulation of warping deformation on laminated plate during reciprocating laser bending
Li Zihui, and Wang Xuyue
In laser bending forming, the warping deformation influences forming accuracy of laminated plate. Therefore, the research of warping deformation in laser reciprocating scanning process has practical significance. Based on ANSYS software, a finite element model (FEM) was built. By simulating temperature field, stress fi
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206008 (2018)
Micro/nano structures fabricated by two-photon photopolymerization of femtosecond laser
Sun Shufeng, and Wang Pingping
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206009 (2018)
Optimization of experimental parameters of laser induced soil plasma spectral radiation
Wang Jinmei, Yan Haiying, Zheng Peichao, and Xue Shuwen
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1206011 (2018)
[in Chinese]
Application of joint time-frequency analysis in coherent Doppler wind lidar
Liu Yanping, Wang Chong, Wu Yunbin, Shangguan Mingjia, and Xia Haiyun
With high accuracy, high spatial-temporal resolution, large scale coverage, coherent Doppler lidar has been widely applied in the detection of wind shear, aircraft vortex, wind power generation, atmosphere turbulence and so on. For lidar signal processing, the key issue is how to extract weak Doppler frequency shift in
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230001 (2018)
Spatiotemporal distribution of aerosols in East China Seas based on spaceborne lidar
Ren Wenhe, Song Xiaoquan, and Wang Fanghan
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230002 (2018)
High resolution imaging experiment on differential synthetic aperture ladar
Wu Jin, Zhao Zhilong, Bai Tao, Li Minglei, Li Danyang, Wan Lei, Tang Yongxin, and Diao Weilun
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230003 (2018)
532 nm/660 nm dual wavelength lidar for self-calibration of water vapor mixing ratio
Deng Qian, Wu Decheng, Kuang Zhiqiang, Liu Dong, Xie Chenbo, and Wang Yingjian
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230004 (2018)
Sidelobe-suppression algorithm of SAL data with modified SVA and compressive sensing
Yin Hongfei, Guo Liang, Zhou Yu, Sun Jianfeng, Zeng Xiaodong, Tang Yu, and Xing Mengdao
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230005 (2018)
Wind velocity estimation algorithm based on Gaussian fitting in coherent lidar
Wang Pingchun, Chen Tingdi, Zhou Anran, Han Fei, Wang Yuanzu, Sun Dongsong, and Wang Guocheng
The power spectral density(PSD) of the wind velocity disturbance was calculated by processing the measured echo signals by using Gaussian fitting estimation algorithm and maximum likelihood (ML)discrete spectral peak(DSP) estimation algorithm respectively. According to Kolmogorov turbulence theory, PSD has the relation
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230006 (2018)
High-power optical parametric oscillator at 935 nm for water-vapor differential absorption lidar transmitter
Hong Guanglie, Liang Xindong, Xiao Chunlei, Kong Wei, and Shu Rong
3ν vibrational absorption band of water vapor lies in the 935 nm spectral region. Differential absorption lidar has much higher measurement sensitivity in this region. Unfortunately, this spectral region is already at the edge of the gain bandwidth of Ti: Sapphire lasers and outside gain bandwidth of Cr: Alexandrite la
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230007 (2018)
Effect of typical filters on return signals of spaceborne HRSL channel at 532 nm
Yu Xiao, Min Min, Zhang Xingying, Meng Xiaoyang, and Deng Xiaobo
The future high spectral resolution lidar(HSRL) system employs a narrow spectral filter to separate the particulate(cloud/aerosol) and molecular scattering components in the lidar return signals, which improves the quality of the retrieved cloud/aerosol optical properties. A simulation method of HSRL return signal base
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230008 (2018)
Development and observational studies of scanning aerosol lidar
Chen Chao, Wang Zhangjun, Song Xiaoquan, Zhang Tao, Du Libin, Meng Xiangqian, Liu Xingtao, Li Xianxin, Li Hui, Zhuang Quanfeng, and Wang Xiufen
Aerosol plays an important role in atmospheric optics, atmospheric radiation, atmospheric chemistry, atmospheric pollution and cloud microphysics, which has been an important factor of atmospheric monitoring. To better study temporal and spatial variation of optical characteristics of atmospheric aerosol, a scanning ae
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1230009 (2018)
[in Chinese]
Analysis of the impulse coupling characteristics of space debris irradiated by pulsed laser with big spot
Lin Zhengguo, Jin Xing, and Chang Hao
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1243001 (2018)
Calculation and analysis of the thermal characteristic of the satellite load radiant plate irradiated by laser
Tang Jinying, Lei Wuhu, Ren Xiaodong, Zhang Kun, and Zhang Mingxin
The change of temperature in satellite have a direct influence on the performance of electrical devices. Aiming at studying the performance of electrical devices due to temperature distribution of radiant plate, the mechanism of temperature dissipation of the radiant plate was analyzed based on its characteristics. The
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1243002 (2018)
Thermal melting damage of thin film components induced by surface impurities and nodule defects
Yu Xia, Xu Jiao, and Zhang Bin
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1243003 (2018)
[in Chinese]
Methods of improving closed-loop bandwidth for large telescope control systems
Deng Yongting, Li Hongwen, and Wang Jianli
In order to improve the performance of perturbation rejection and the accuracy of tracking for the large telescope, the control system of the telescope needs to have a good dynamic performance, which is due to the closed-loop bandwidth. Firstly, the factors that affect the close-loop bandwith and the dynamics of the te
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1237001 (2018)
[in Chinese]
Polarization control method of vector light field based on S-wave plate and double retarders
He Wenjun, Jia Wentao, Li Yahong, Wang Qi, and Fu Yuegang
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1207001 (2018)
Experimental study on the superposition of high-order radial Laguerre-Gaussian beams
Ke Xizheng, and Shi Xinyu
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1207002 (2018)
[in Chinese]
Single-line LiDAR data matching method based on graph theory
Zhang Yuan, and Yang Zhiqing
Aiming at the problem of low registration accuracy of traditional laser scan matching method under multi-obstacle environment, a matching method based on graph theory was proposed. In this method, concave and convex points were extracted from the data points, then the corresponding line segments were extracted and the
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1226001 (2018)
Research of preparation and image processing method of PDMS micropost arrays with opaque top surfaces
Li Bo, Dong Mingli, and Zhang Fan
Cells use force as a mechanical signal to sense and respond to their microenvironment. To this end, PDMS micropost arrays has been widely used in cell traction force measurement, which allows calculating magnitude and direction of cell force from the deflection of the micropost. However, the inherent transparency of PD
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1226003 (2018)
Object tracking algorithm based on two-step correlation filter
Ge Baoyi, Zuo Xianzhang, Hu Yongjiang, and Zhang Yan
Aiming at the problem of tracking failure caused by object occlusion and out of view in object tracking, a two-step correlation filter for object tracking algorithm was proposed to advance the robustness of the object tracking via correlation filter. Firstly, according to the characteristics of different cell size of h
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 47, Issue 12, 1226004 (2018)