- Special Issue
- High Energy Density Physics and High Power Lasers
- 7 Article (s)
Time-of-flight methodologies with large-area diamond detectors for ion characterization in laser-driven experiments
M. Salvadori, G. Di Giorgio, M. Cipriani, M. Scisciò, C. Verona, P. L. Andreoli, G. Cristofari, R. De Angelis, M. Pillon, N. E. Andreev, P. Antici, N. G. Borisenko, D. Giulietti, M. Migliorati, O. Rosmej, S. Zähter, and F. Consoli
The time-of-flight technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser–matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP shielding. Here we present a new advanced prototype of detector, developed at ENEA-Centro Ricerche Frascati (Italy), with a large-area (15 mm × 15 mm) polycrystalline diamond sensor having 150 μm thickness. The tailored detector design and testing ensure high sensitivity and, thanks to the fast temporal response, high-energy resolution of the reconstructed ion spectrum. The detector was offline calibrated and then successfully tested during an experimental campaign carried out at the PHELIX laser facility ( ${E}_L\sim$ 100 J, ${\tau}_L = 750$ fs, ${I}_L\sim \left(1{-}2.5\right)\times {10}^{19}$ W/cm2) at GSI (Germany). The high rejection to EMP fields was demonstrated and suitable calibrated spectra of the accelerated protons were obtained. The time-of-flight technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser–matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP shielding. Here we present a new advanced prototype of detector, developed at ENEA-Centro Ricerche Frascati (Italy), with a large-area (15 mm × 15 mm) polycrystalline diamond sensor having 150 μm thickness. The tailored detector design and testing ensure high sensitivity and, thanks to the fast temporal response, high-energy resolution of the reconstructed ion spectrum. The detector was offline calibrated and then successfully tested during an experimental campaign carried out at the PHELIX laser facility ( ${E}_L\sim$ 100 J, ${\tau}_L = 750$ fs, ${I}_L\sim \left(1{-}2.5\right)\times {10}^{19}$ W/cm2) at GSI (Germany). The high rejection to EMP fields was demonstrated and suitable calibrated spectra of the accelerated protons were obtained.
High Power Laser Science and Engineering
- Publication Date: Jan. 01, 2022
- Vol. 10, Issue 1, 010000e6 (2022)
High-intensity laser-driven secondary radiation sources using the ZEUS 45 TW laser system at the Institute of Plasma Physics and Lasers of the Hellenic Mediterranean University Research Centre
E. L. Clark, A. Grigoriadis, S. Petrakis, I. Tazes, G. Andrianaki, A. Skoulakis, Y. Orphanos, E. Kaselouris, I. Fitilis, J. Chatzakis, E. Bakarezos, V. Dimitriou, E. P. Benis, N. A. Papadogiannis, and M. Tatarakis
The rapid development of high-intensity laser-generated particle and photon secondary sources has attracted widespread interest during the last 20 years not only due to fundamental science research but also because of the important applications of this developing technology. For instance, the generation of relativistic particle beams, betatron-type coherent X-ray radiation and high harmonic generation have attracted interest from various fields of science and technology owing to their diverse applications in biomedical, material science, energy, space, and security applications. In the field of biomedical applications in particular, laser-driven particle beams as well as laser-driven X-ray sources are a promising field of study. This article looks at the research being performed at the Institute of Plasma Physics and Lasers (IPPL) of the Hellenic Mediterranean University Research Centre. The recent installation of the ZEUS 45 TW laser system developed at IPPL offers unique opportunities for research in laser-driven particle and X-ray sources. This article provides information about the facility and describes initial experiments performed for establishing the baseline platforms for secondary plasma sources. The rapid development of high-intensity laser-generated particle and photon secondary sources has attracted widespread interest during the last 20 years not only due to fundamental science research but also because of the important applications of this developing technology. For instance, the generation of relativistic particle beams, betatron-type coherent X-ray radiation and high harmonic generation have attracted interest from various fields of science and technology owing to their diverse applications in biomedical, material science, energy, space, and security applications. In the field of biomedical applications in particular, laser-driven particle beams as well as laser-driven X-ray sources are a promising field of study. This article looks at the research being performed at the Institute of Plasma Physics and Lasers (IPPL) of the Hellenic Mediterranean University Research Centre. The recent installation of the ZEUS 45 TW laser system developed at IPPL offers unique opportunities for research in laser-driven particle and X-ray sources. This article provides information about the facility and describes initial experiments performed for establishing the baseline platforms for secondary plasma sources.
High Power Laser Science and Engineering
- Publication Date: Jan. 01, 2021
- Vol. 9, Issue 4, 04000e53 (2021)
2-kW-level superfluorescent fiber source with flexible wavelength and linewidth tunable characteristics
Jun Ye, Chenchen Fan, Jiangming Xu, Hu Xiao, Jinyong Leng, and Pu Zhou
The superfluorescent fiber source (SFS) with tunable optical spectrum has shown great application potential in the sensing, imaging, and spectral combination. Here, we demonstrate for the first time a 2-kW-level wavelength and linewidth tunable SFS. Based on a flexible filtered SFS seed and three stages of fiber amplifiers, the output power can be scaled from the milliwatt level to about 2 kW, with a wavelength tuning range of 1068–1092 nm and a linewidth tuning range of 2.5–9.7 nm. Moreover, a numerical simulation is conducted based on the generalized nonlinear Schrödinger equation, and the results reveal that the wavelength tuning range is limited by the decrease of seed power and the growth of amplified spontaneous emission, whereas the linewidth tuning range is determined by the gain competition and nonlinear Kerr effects. The developed wavelength and linewidth tunable SFS may be applied to scientific research and industrial processing. The superfluorescent fiber source (SFS) with tunable optical spectrum has shown great application potential in the sensing, imaging, and spectral combination. Here, we demonstrate for the first time a 2-kW-level wavelength and linewidth tunable SFS. Based on a flexible filtered SFS seed and three stages of fiber amplifiers, the output power can be scaled from the milliwatt level to about 2 kW, with a wavelength tuning range of 1068–1092 nm and a linewidth tuning range of 2.5–9.7 nm. Moreover, a numerical simulation is conducted based on the generalized nonlinear Schrödinger equation, and the results reveal that the wavelength tuning range is limited by the decrease of seed power and the growth of amplified spontaneous emission, whereas the linewidth tuning range is determined by the gain competition and nonlinear Kerr effects. The developed wavelength and linewidth tunable SFS may be applied to scientific research and industrial processing.
High Power Laser Science and Engineering
- Publication Date: Jan. 01, 2021
- Vol. 9, Issue 4, 04000e55 (2021)
Static and dynamic mode evolution in high-power distributed side-coupled cladding-pumped fiber amplifiers
Rumao Tao, Yu Liu, Lianghua Xie, Cong Gao, Min Li, Benjian Shen, Shan Huang, Honghuan Lin, Jianjun Wang, and Feng Jing
We present a theoretical study of mode evolution in high-power distributed side-coupled cladding-pumped (DSCCP) fiber amplifiers. A semi-analytical model taking the side-pumping schemes, transverse mode competition, and stimulated thermal Rayleigh scattering into consideration has been built, which can model the static and dynamic mode evolution in high-power DSCCP fiber amplifiers. The mode evolution behavior has been investigated with variation of the fiber amplifier parameters, such as the pump power distribution, the length of the DSCCP fiber, the averaged coupling coefficient, the number of the pump cores and the arrangement of the pump cores. Interestingly, it revealed that static mode evolution induced by transverse mode competition is different from the dynamic evolution induced by stimulated thermal Rayleigh scattering. This shows that the high-order mode experiences a slightly higher gain in DSCCP fiber amplifiers, but the mode instability thresholds for DSCCP fiber amplifiers are higher than those for their end-coupled counterparts. By increasing the pump core number and reducing the averaged coupling coefficient, the mode instability threshold can be increased, which indicates that DSCCP fibers can provide additional mitigation strategies of dynamic mode instability. We present a theoretical study of mode evolution in high-power distributed side-coupled cladding-pumped (DSCCP) fiber amplifiers. A semi-analytical model taking the side-pumping schemes, transverse mode competition, and stimulated thermal Rayleigh scattering into consideration has been built, which can model the static and dynamic mode evolution in high-power DSCCP fiber amplifiers. The mode evolution behavior has been investigated with variation of the fiber amplifier parameters, such as the pump power distribution, the length of the DSCCP fiber, the averaged coupling coefficient, the number of the pump cores and the arrangement of the pump cores. Interestingly, it revealed that static mode evolution induced by transverse mode competition is different from the dynamic evolution induced by stimulated thermal Rayleigh scattering. This shows that the high-order mode experiences a slightly higher gain in DSCCP fiber amplifiers, but the mode instability thresholds for DSCCP fiber amplifiers are higher than those for their end-coupled counterparts. By increasing the pump core number and reducing the averaged coupling coefficient, the mode instability threshold can be increased, which indicates that DSCCP fibers can provide additional mitigation strategies of dynamic mode instability.
High Power Laser Science and Engineering
- Publication Date: Jan. 01, 2021
- Vol. 9, Issue 4, 04000e58 (2021)
Enhancement of pre-pulse and picosecond pedestal contrast of the petawatt J-KAREN-P laser
Hiromitsu Kiriyama, Yasuhiro Miyasaka, Akira Kon, Mamiko Nishiuchi, Akito Sagisaka, Hajime Sasao, Alexander S. Pirozhkov, Yuji Fukuda, Koichi Ogura, Kotaro Kondo, Nicholas P. Dover, and Masaki Kando
We have experimentally improved the temporal contrast of the petawatt J-KAREN-P laser facility. We have investigated how the generation of pre-pulses by post-pulses changes due to the temporal overlap between the stretched pulse and the post-pulse in a chirped-pulse amplification system. We have shown that the time at which the pre-pulse is generated by the post-pulse and its shape are related to the time difference between the stretched main pulse and the post-pulse. With this investigation, we have found and identified the origins of the pre-pulses and have demonstrated the removal of most pre-pulses by eliminating the post-pulse with wedged optics. We have also demonstrated the impact of stretcher optics on the picosecond pedestal. We have realized orders of magnitude enhancement of the pedestal by improving the optical quality of a key component in the stretcher. We have experimentally improved the temporal contrast of the petawatt J-KAREN-P laser facility. We have investigated how the generation of pre-pulses by post-pulses changes due to the temporal overlap between the stretched pulse and the post-pulse in a chirped-pulse amplification system. We have shown that the time at which the pre-pulse is generated by the post-pulse and its shape are related to the time difference between the stretched main pulse and the post-pulse. With this investigation, we have found and identified the origins of the pre-pulses and have demonstrated the removal of most pre-pulses by eliminating the post-pulse with wedged optics. We have also demonstrated the impact of stretcher optics on the picosecond pedestal. We have realized orders of magnitude enhancement of the pedestal by improving the optical quality of a key component in the stretcher.
High Power Laser Science and Engineering
- Publication Date: Jan. 01, 2021
- Vol. 9, Issue 4, 04000e62 (2021)
MTW-OPAL: a technology development platform for ultra-intense optical parametric chirped-pulse amplification systems|On the Cover
J. Bromage, S.-W. Bahk, M. Bedzyk, I. A. Begishev, S. Bucht, C. Dorrer, C. Feng, C. Jeon, C. Mileham, R. G. Roides, K. Shaughnessy, M. J. Shoup, M. Spilatro, B. Webb, D. Weiner, and J. D. Zuegel
Optical parametric chirped-pulse amplification implemented using multikilojoule Nd:glass pump lasers is a promising approach for producing ultra-intense pulses (>1023 W/cm2). We report on the MTW-OPAL Laser System, an optical parametric amplifier line (OPAL) pumped by the Nd:doped portion of the multi-terawatt (MTW) laser. This midscale prototype was designed to produce 0.5-PW pulses with technologies scalable to tens of petawatts. Technology choices made for MTW-OPAL were guided by the longer-term goal of two full-scale OPALs pumped by the OMEGA EP to produce 2 × 25-PW beams that would be co-located with kilojoule-nanosecond ultraviolet beams. Several MTW-OPAL campaigns that have been completed since “first light” in March 2020 show that the laser design is fundamentally sound, and optimization continues as we prepare for “first-focus” campaigns later this year. Optical parametric chirped-pulse amplification implemented using multikilojoule Nd:glass pump lasers is a promising approach for producing ultra-intense pulses (>1023 W/cm2). We report on the MTW-OPAL Laser System, an optical parametric amplifier line (OPAL) pumped by the Nd:doped portion of the multi-terawatt (MTW) laser. This midscale prototype was designed to produce 0.5-PW pulses with technologies scalable to tens of petawatts. Technology choices made for MTW-OPAL were guided by the longer-term goal of two full-scale OPALs pumped by the OMEGA EP to produce 2 × 25-PW beams that would be co-located with kilojoule-nanosecond ultraviolet beams. Several MTW-OPAL campaigns that have been completed since “first light” in March 2020 show that the laser design is fundamentally sound, and optimization continues as we prepare for “first-focus” campaigns later this year.
High Power Laser Science and Engineering
- Publication Date: Jan. 01, 2021
- Vol. 9, Issue 4, 04000e63 (2021)
Transient electromagnetic fields generated in experiments at the PHELIX laser facility
M. Scisciò, F. Consoli, M. Salvadori, N. E. Andreev, N. G. Borisenko, S. Zähter, and O. Rosmej
Large-amplitude electromagnetic radiofrequency fields are created by the charge-separation induced in interactions of high-intensity, short-pulse lasers with solid targets and have intensity that decreases with the distance from the target. Alternatively, it was experimentally proved very recently that charged particles emitted by petawatt laser–target interactions can be deposited on a capacitor-collector structure, far away from the target, and lead to the rapid (nanosecond-scale) generation of large quasi-static electric fields ($\mathrm{MV}/\mathrm{m}$), over wide regions. We demonstrate here the generation of both these fields in experiments at the PHELIX laser facility, with approximately $20\;\mathrm{J}$ energy and approximately ${10}^{19}\;\mathrm{W}/\mathrm{c}{\mathrm{m}}^2$ intensity, for picoseconds laser pulses, interacting with pre-ionized polymer foams of near critical density. Quasi-static fields, up to tens of kV/m, were here observed at distances larger than $1\;\mathrm{m}$ from the target, with results much higher than the radiofrequency component. This is of primary importance for inertial-confinement fusion and laser–plasma acceleration and also for promising applications in different scenarios. Large-amplitude electromagnetic radiofrequency fields are created by the charge-separation induced in interactions of high-intensity, short-pulse lasers with solid targets and have intensity that decreases with the distance from the target. Alternatively, it was experimentally proved very recently that charged particles emitted by petawatt laser–target interactions can be deposited on a capacitor-collector structure, far away from the target, and lead to the rapid (nanosecond-scale) generation of large quasi-static electric fields ($\mathrm{MV}/\mathrm{m}$), over wide regions. We demonstrate here the generation of both these fields in experiments at the PHELIX laser facility, with approximately $20\;\mathrm{J}$ energy and approximately ${10}^{19}\;\mathrm{W}/\mathrm{c}{\mathrm{m}}^2$ intensity, for picoseconds laser pulses, interacting with pre-ionized polymer foams of near critical density. Quasi-static fields, up to tens of kV/m, were here observed at distances larger than $1\;\mathrm{m}$ from the target, with results much higher than the radiofrequency component. This is of primary importance for inertial-confinement fusion and laser–plasma acceleration and also for promising applications in different scenarios.
High Power Laser Science and Engineering
- Publication Date: Jan. 01, 2021
- Vol. 9, Issue 4, 04000e64 (2021)
Special Issue on High Energy Density Physics and High Power Lasers 2021
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20