Journals >Chinese Optics Letters
Contents
2008
Volume: 6 Issue 11
22 Article(s)
Export citation format
Research Article
Improved free space optical communications performance by using time diversity
Jing Chen, Yong Ai, and Ying Tan
A laser beam propagating through turbulence experiences random amplitude and phase fluctuations, which can severely degrade the performance of free space optical communication systems. In this letter, time diversity is demonstrated as a technique which can decrease turbulence influence. Statistically, laser propagationA laser beam propagating through turbulence experiences random amplitude and phase fluctuations, which can severely degrade the performance of free space optical communication systems. In this letter, time diversity is demonstrated as a technique which can decrease turbulence influence. Statistically, laser propagation along an atmospheric path is uncorrelated with an earlier-time path for a time interval greater than the atmospheric turbulence correlation time. To estimate time diversity system performance, a 2.2-km optical link is set up for comparing the fade probability of a system using time diversity with a system not using time diversity. The experimental results obtained under different turbulence conditions are shown which are in good agreement with the theory..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 797 (2008)
Influence of laser intensity on the double-resonance multiphoton ionization process of NO molecule
Guiyin Zhang, and Yidong Jin
The analytic formula of the ionization efficiency in the process of double resonance enhanced multi-photon ionization (DREMPI) is derived from the dynamic rate equation about the interaction of photon and material. Based on this formula, the ionization efficiency and the laser power index versus laser intensity in the The analytic formula of the ionization efficiency in the process of double resonance enhanced multi-photon ionization (DREMPI) is derived from the dynamic rate equation about the interaction of photon and material. Based on this formula, the ionization efficiency and the laser power index versus laser intensity in the DREMPI process of NO molecule, via A2\sum and S2\sum intermediate resonant states, is numerically simulated. It is shown that the ionization efficiency of NO molecule increases with the laser intensity until getting saturation, while the laser power index decreases with the enhancement of the laser intensity and changes to zero at last. The variation of the laser power index with the laser intensity indicates that the ionization efficiency reaches saturation in the one, two, and three excitation steps respectively. It is also found that the narrower the laser pulse duration is, the higher becomes the laser intensity for saturation..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 800 (2008)
Energy levels and radiative lifetimes of 3pns 3P0 and 3pnd 3P0 series of Si I
Liang Liang, Chao Zhou, and Ling Zhang
The energy levels and lifetimes of 3pns 3P0(n=7-35) and 3pnd 3P0 (n=6-17) series of neutral silicon are calculated and predicted by means of multichannel quantum defect theory (MQDT). In addition, the perturbation caused by core-excited state 3s3p3 is discussed. The 3pnd 3P0 series, especially 3p4d 3P0, 3p5d 3P0, and 3The energy levels and lifetimes of 3pns 3P0(n=7-35) and 3pnd 3P0 (n=6-17) series of neutral silicon are calculated and predicted by means of multichannel quantum defect theory (MQDT). In addition, the perturbation caused by core-excited state 3s3p3 is discussed. The 3pnd 3P0 series, especially 3p4d 3P0, 3p5d 3P0, and 3p6d 3P0 are perturbed strongly by the core-excited state 3s3p3 3P0. These cause the lifetime of 3pnd 3P0 (n=5-7) to be less than that of 3p4d 3P0. The lifetimes of 3p14d 3P0 (65479.14 cm-1) and 3p16d 3P0 (65608.77 cm-1) are less than that of their frontal states respectively, because these states are perturbed by 3p22s 3P0 (65476.48 cm-1) and 3p30s 3P0 (65608.99 cm-1) respectively..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 804 (2008)
A novel optical burst switching architecture for high speed networks
Amit Kumar, and R. S.
A novel optical burst switching (OBS) high speed network architecture has been proposed. To verify its feasibility and evaluate its performance, just-enough-time (JET) signaling has been considered as a high performance protocol. In the proposed architecture, to avoid burst losses, firstly, a short-prior-confirmation-pA novel optical burst switching (OBS) high speed network architecture has been proposed. To verify its feasibility and evaluate its performance, just-enough-time (JET) signaling has been considered as a high performance protocol. In the proposed architecture, to avoid burst losses, firstly, a short-prior-confirmation-packet (SPCP) is sent over the control channel that simulates the events that the actual packet will experience. Once SPCP detects a drop at any of the intermediate nodes, the actual packet is not sent but the process repeats. In order to increase network utilization, cost effectiveness and to overcome some limitations of conventional OBS, inherent codes (e.g., orthogonal optical codes (OOC)), which are codified only in intensity, has been used. Through simulations, it shows that a decrease in burst loss probability, cost effectiveness and a gain in processing time are obtained when optical label processing is used as compared with electronic processing..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 807 (2008)
A novel method of polarization state control for polarization division multiplexing system
Tiecheng Wang, Shoufeng Lan, Junfeng Jiang, and Tiegen Liu
We describe a new algorithm in a cost effective polarization division multiplexing (PDM) system. Without modifying the existing transmitter, receiver electronics, or softwares, we use a special optical scheme to demultiplex the signal multiplexed and improve it with a conjugated gradient algorithm. We experimentally reWe describe a new algorithm in a cost effective polarization division multiplexing (PDM) system. Without modifying the existing transmitter, receiver electronics, or softwares, we use a special optical scheme to demultiplex the signal multiplexed and improve it with a conjugated gradient algorithm. We experimentally resume the polarization state with a deviation under 5% and the power loss less than 20 dB which proves the feasibility of the polarization control algorithm in the new polarization multiplexing system..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 812 (2008)
Design of the target type flowmeter based on fiber Bragg grating and experiment
Xueguang Qiao, Qian Zhang, Haiwei Fu, and Dakuan Yu
The target type flowmeter based on fiber Bragg gratings (FBGs) is experimentally studied. The relationship between the central wavelength shift of FBG and the flux is derived and the analytic expression is also given. Simulation and preliminary experiments have been carried out, and experimental validation of the waterThe target type flowmeter based on fiber Bragg gratings (FBGs) is experimentally studied. The relationship between the central wavelength shift of FBG and the flux is derived and the analytic expression is also given. Simulation and preliminary experiments have been carried out, and experimental validation of the water further proves the feasibility of the sensor. The experimental results verify the proposed sensor which can measure flux range from 200 to 1200 cm3/s. And on this basis, the improvement program is raised..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 815 (2008)
A novel fiber-laser-based fiber Bragg grating strain sensor with high-birefringence Sagnac fiber loop mirror
Ou Xu, Shaohua Lu, Suchun Feng, and Shuisheng Jian
A novel fiber-laser-based strain sensor is proposed and experimentally demonstrated. The laser cavity is composed of a high-birefringence Sagnac fiber loop mirror (HiBi-SFLM) and a fiber Bragg grating (FBG) which also acts as a strain-sensing element. In the linear region of the HiBi-SFLM reflection spectrum, when the A novel fiber-laser-based strain sensor is proposed and experimentally demonstrated. The laser cavity is composed of a high-birefringence Sagnac fiber loop mirror (HiBi-SFLM) and a fiber Bragg grating (FBG) which also acts as a strain-sensing element. In the linear region of the HiBi-SFLM reflection spectrum, when the strain applied on the FBG makes the Bragg grating wavelength shift, the laser output power changes due to reflectivity variation of the HiBi-SFLM. Experimental results show that the laser output power varies almost linearly with the applied strain. The measurement of the output power can be performed by a conventional photo-detector..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 818 (2008)
Design of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber
Shuqin Lou, Hong Fang, Honglei Li, Tieying Guo, Lei Yao, Liwen Wang, Weiguo Chen, and Shuisheng Jian
We propose a new structure of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber (PCF). Through optimizing the diameters of the first two inner rings of air-holes and the GeO2 doping concentration of the core, the nonlinear coefficient is up to 47 W-1 km-1 at the wavelength of 1.55 \mum We propose a new structure of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber (PCF). Through optimizing the diameters of the first two inner rings of air-holes and the GeO2 doping concentration of the core, the nonlinear coefficient is up to 47 W-1 km-1 at the wavelength of 1.55 \mum and nearly-zero flattened dispersion of \pm 0.5 ps/(nm km) is achieved in the telecommunication window (1460-1625 nm). Due to the use of GeO2-doped core, this innovative structure can offer not only a large nonlinear coefficient and broadband nearly-zero flattened dispersion but also low leakage losses..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 821 (2008)
Improving iris recognition performance via multi-instance fusion at the score level
Fenghua Wang, Xianghua Yao, and Jiuqiang Han
Fusion of multiple instances within a modality for biometric verification performance improvement has received considerable attention. In this letter, we present an iris recognition method based on multi-instance fusion, which combines the left and right irises of an individual at the matching score level. When fusing,Fusion of multiple instances within a modality for biometric verification performance improvement has received considerable attention. In this letter, we present an iris recognition method based on multi-instance fusion, which combines the left and right irises of an individual at the matching score level. When fusing, a novel fusion strategy using minimax probability machine (MPM) is applied to generate a fused score for the final decision. The experimental results on CASIA and UBIRIS databases show that the proposed method can bring obvious performance improvement compared with the single-instance method. The comparison among different fusion strategies demonstrates the superiority of the fusion strategy based on MPM..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 824 (2008)
Translation, rotation, and scale invariant image registration technique using angular and radial difference functions
Li Li, Qingshuang Zeng, and Fanfeng Meng
An algorithm is proposed for registering images related by translation, rotation, and scale based on angular and radial difference functions. In frequency domain, the spatial translation parameters are computed via phase correlation method. The magnitudes of images are represented in log-polar grid, and the angular andAn algorithm is proposed for registering images related by translation, rotation, and scale based on angular and radial difference functions. In frequency domain, the spatial translation parameters are computed via phase correlation method. The magnitudes of images are represented in log-polar grid, and the angular and radial difference functions are given and applied to measure shifts in both angular and radial dimensions for rotation and scale estimation. Experimental results show that this method achieves the same accurate level as classic fast Fourier transform (FFT) based method with invariance to illumination change and lower computation costs..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 827 (2008)
Absolute small-angle measurement based on optical feedback interferometry
Jingang Zhong, Xianhua Zhang, and Zhixiang Ju
We present a simple but effective method for small-angle measurement based on optical feedback interferometry (or laser self-mixing interferometry). The absolute zero angle can be defined at the biggest fringe amplitude point, so this method can also achieve absolute angle measurement. In order to verify the method, weWe present a simple but effective method for small-angle measurement based on optical feedback interferometry (or laser self-mixing interferometry). The absolute zero angle can be defined at the biggest fringe amplitude point, so this method can also achieve absolute angle measurement. In order to verify the method, we construct an angle measurement system. The Fourier-transform method is used to analysis the interference signal. Rotation angles are experimentally measured with a resolution of 10^{-6} rad and a measurement range of approximately from -0.0007 to +0.0007 rad..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 830 (2008)
Calculation on diffraction aperture of cube corner retroreflector
Song Li, Bei Tang, and Hui Zhou
On the basis of optical property of cube corner retroreflector (CCR), a new perception and calculation approach for diffraction aperture of CCR in two different forms is presented. The relationship between diffraction apertures and incident light with six different combinations of reflection order and incident angle isOn the basis of optical property of cube corner retroreflector (CCR), a new perception and calculation approach for diffraction aperture of CCR in two different forms is presented. The relationship between diffraction apertures and incident light with six different combinations of reflection order and incident angle is established. Far-field diffraction patterns of CCR under various incident conditions are also provided..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 833 (2008)
Investigation of surface acoustic waves in laser shock peened metals
Ling Yuan, Gang Yan, Zhonghua Shen, Hangwei Xu, Xiaowu Ni, and Jian Lu
Laser shock peening is a well-known method for extending the fatigue life of metal components by introducing near-surface compressive residual stress. The surface acoustic waves (SAWs) are dispersive when the near-surface properties of materials are changed. So the near-surface properties (such as the thickness of hardLaser shock peening is a well-known method for extending the fatigue life of metal components by introducing near-surface compressive residual stress. The surface acoustic waves (SAWs) are dispersive when the near-surface properties of materials are changed. So the near-surface properties (such as the thickness of hardened layers, elastic properties, residual stresses, etc.) can be analyzed by the phase velocity dispersion. To study the propagation of SAWs in metal samples after peening, a more reasonable experimental method of broadband excitation and reception is introduced. The ultrasonic signals are excited by laser and received by polyvinylindene fluoride (PVDF) transducer. The SAW signals in aluminum alloy materials with different impact times by laser shock peening are detected. Signal spectrum and phase velocity dispersion curves of SAWs are analyzed. Moreover, reasons for dispersion are discussed..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 837 (2008)
Narrow-linewidth single-polarization frequency-modulated Er-doped fiber ring laser
Pan Ou, Yudong Jia, Bin Cao, Chunxi Zhang, Shuling Hu, and Di Feng
We demonstrate a 1550-nm narrow-linewidth fiber ring laser with stable single polarization by using single-mode Er-doped fiber as active fiber and saturable absorber. A polarization-maintaining circulator is used to acquire single-polarization laser light with the degree of polarization of 99.8%—99.9%. The linewidth meWe demonstrate a 1550-nm narrow-linewidth fiber ring laser with stable single polarization by using single-mode Er-doped fiber as active fiber and saturable absorber. A polarization-maintaining circulator is used to acquire single-polarization laser light with the degree of polarization of 99.8%—99.9%. The linewidth measured using a delayed self-heterodyne method is less than 0.5 kHz. Frequency of the fiber laser can be modulated by driving the waveguide phase modulator with proper voltage. A Mach-Zehnder interferometer with the optical path difference between two arms of about 36 km is used to study the long-distance coherent detection of the fiber laser for frequency-modulated continuous-wave application..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 845 (2008)
Cavity-enhanced laser cooling of solid-state materials in a standing-wave cavity
Youhua Jia, Biao Zhong, and Jianping Yin
We propose a new method to cool the Yb3+-doped ZBLANP glass in a standing-wave cavity. There are two advantages of this cavity-enhanced technique: the pumping power is greatly enhanced and the absorption of the cooling material is greatly increased. We introduce the basic principle of the cavity-enhanced laser cooling We propose a new method to cool the Yb3+-doped ZBLANP glass in a standing-wave cavity. There are two advantages of this cavity-enhanced technique: the pumping power is greatly enhanced and the absorption of the cooling material is greatly increased. We introduce the basic principle of the cavity-enhanced laser cooling and discuss the cooling effect of a solid-state material in a cavity. From the theoretical study, it is found that the laser cooling effect is strongly dependent on the reflectivity of the cavity mirrors, the length of the solid material, the surface scattering of the material, and so on. Some optimal parameters for efficient laser cooling are obtained..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 848 (2008)
Continuous-wave and Q-switched performance of an Yb:YAG/YAG composite thin disk ceramic laser pumped with 970-nm laser diode
Hong Cai, Jun Zhou, Hongming Zhao, Yunfeng Qi, Qihong Lou, Jingxing Dong, and Yunrong Wei
Using front face-pumped compact active mirror laser (CAMIL) structure, we have demonstrated an Yb:YAG/YAG composite ceramic disk laser with pumping wavelength at 970 nm. The laser has been operated in both continuous-wave (CW) and Q-switching modes. Under CW operation, laser output power of 1.05 W with 2% transmission Using front face-pumped compact active mirror laser (CAMIL) structure, we have demonstrated an Yb:YAG/YAG composite ceramic disk laser with pumping wavelength at 970 nm. The laser has been operated in both continuous-wave (CW) and Q-switching modes. Under CW operation, laser output power of 1.05 W with 2% transmission output coupler was achieved at the wavelength of 1031 nm. Q-switched laser output was gotten by using an acousto-optic Q-switch. The repetition rate ranged from 1 to 30 kHz and the pulse width varied from 166 to 700 ns..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 852 (2008)
Design and analysis of optically pumped semiconductor VECSEL with ANECz optical control layer
Yuqi Zhou, Dapeng Zhao, Yajuan Li, and Qingxin Yang
Through the reversible isomerization of trans-cis-trans under the linear polarization light, the molecules of azo materials have the same tropism which is vertical to the polarization of light. This means that azo materials have photo-induced birefringence which is related to optical power and polarization angle of theThrough the reversible isomerization of trans-cis-trans under the linear polarization light, the molecules of azo materials have the same tropism which is vertical to the polarization of light. This means that azo materials have photo-induced birefringence which is related to optical power and polarization angle of the light. Based on the photo-induced birefringence of azo materials, we design a new type of optically pumped semiconductor vertical external cavity surface emitting laser (OPS-VECSEL) which can control the polarization and frequency of the ejection laser. The functional molecules of azo materials are [3-azo-(4'nitro)]-(9-ethyl)-carbazole (ANECz)..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 855 (2008)
Effect of dichroic azo-dye doped on ferroelectric liquid crystals
Yayun Feng, and Zhihua Ling
In order to study the effect of mixing dye in ferroelectric liquid crystal (FLC) materials, the phase transition temperature and electro-optical properties of azo dye doped FLC samples have been investigated. All the properties have been found to be changed drastically. The results have revealed that not only the SmC*-In order to study the effect of mixing dye in ferroelectric liquid crystal (FLC) materials, the phase transition temperature and electro-optical properties of azo dye doped FLC samples have been investigated. All the properties have been found to be changed drastically. The results have revealed that not only the SmC*-SmA* transition temperature decreased markedly by the addition of azo-dye, but also dye-doped FLC had lower threshold voltage and saturation voltage than the pure FLC..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 858 (2008)
Effect of temperature on three-in-one composite compensator
Qingdian Kong, Lianke Song, Handong Peng, Hailong Wang, Lihua Kong, Congmin Wang, and Lan Wang
In order to reduce the error caused by the change of temperature, the relation between three-in-one composite compensator's phase retardation and temperature is calculated according to the characteristic of multiple-order quartz wave-plate. The results show that the influence on phase retardation increases with theIn order to reduce the error caused by the change of temperature, the relation between three-in-one composite compensator's phase retardation and temperature is calculated according to the characteristic of multiple-order quartz wave-plate. The results show that the influence on phase retardation increases with the increase of temperature and order of wave-plate. The phase retardation and the angle that the second wave-plate rotates are in a linear relationship in certain ranges. However, there is also some regularity in nonlinear areas which can be determined by theoretical calculation. The calculated result is well in agreement with experiments..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 861 (2008)
Performance testing of log pile photonic crystal fast-fabricated by direct femtosecond laser writing
Haifeng Yang, Ming Zhou, Juan Dai, Jianke Di, and Enlan Zhao
Great efforts has been made on fabricating photonic crystals (PCs) with photonic band gaps (PBGs) during the past decade. Three-dimensional (3D) log pile PC was fabricated fast by direct femtosecond laser writing in ORMOCER. Qualitative analysis of the errors of PC was investigated using the Image Pro Plus. Surface quaGreat efforts has been made on fabricating photonic crystals (PCs) with photonic band gaps (PBGs) during the past decade. Three-dimensional (3D) log pile PC was fabricated fast by direct femtosecond laser writing in ORMOCER. Qualitative analysis of the errors of PC was investigated using the Image Pro Plus. Surface qualities such as bending, distortion, and surface roughness were shown, and the band gap in the infrared wavelength region was observed. Meanwhile, the theory was experimentally verified that the center of PBG diminishes as the crystal lattice period reduces. Therefore, it is possible to fabricate PCs whose band gap range is from the near-infrared to visible wave band..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 864 (2008)
Multi-target real-time ranging with chaotic laser radar
Bingjie Wang, Yuncai Wang, Lingqin Kong, and Anbang Wang
We demonstrate the feasibility of multi-target real-time ranging with a chaotic laser radar. The used chaotic laser is emitted by a semiconductor laser with optical feedback. We design a proof-of-concept experiment based on the correlation detection and realize the range measurements of two targets simultaneously. The We demonstrate the feasibility of multi-target real-time ranging with a chaotic laser radar. The used chaotic laser is emitted by a semiconductor laser with optical feedback. We design a proof-of-concept experiment based on the correlation detection and realize the range measurements of two targets simultaneously. The range resolution of 9 cm between two targets is achieved, which is limited by the bandwidth of the used real-time oscilloscope. A preliminary experiment of chaotic laser coherence is carried out to verify the high resolution of the chaotic lidar..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 868 (2008)
Size measurement of nano-particles using self-mixing effect
Huarui Wang, and Jianqi Shen
In this letter, the technique of laser self-mixing effect is employed for nano-particle size analysis. In contrast to the photon correlation spectroscopy (PCS) and photon cross correlation spectroscopy (PCCS), the main advantages of this technique are sensitive, compact, low-cost, and simple experimental setup etc. An In this letter, the technique of laser self-mixing effect is employed for nano-particle size analysis. In contrast to the photon correlation spectroscopy (PCS) and photon cross correlation spectroscopy (PCCS), the main advantages of this technique are sensitive, compact, low-cost, and simple experimental setup etc. An improved Kaczmarz projection method is developed in the inversion problem to extract the particle size distribution. The experimental results prove that nano-particle size can be measured reasonably by using the self-mixing effect technique combined with the improved projection algorithm..
Chinese Optics Letters
- Publication Date: Jul. 24, 2019
- Vol. 6, Issue 11, 871 (2008)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20