Contents
2022
Volume: 41 Issue 8
41 Article(s)

Export citation format
[in Chinese]
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 1 (2022)
Research Progress of Mid-Infrared Tellurite Glass and Optical Fibers
WAN Rui, YANG Liqing, HUO Weirong, MA Yuan, LI Shengwu, GUO Chen, and WANG Pengfei
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2589 (2022)
Review on Mechanism of Chloride Ion Binding and Its Influencing Factors in Cement-Based Materials
GENG Yuanjie, SUN Congtao, SUN Ming, ZHANG Yuguo, and DUAN Jizhou
The chloride ion binding ability of cement-based materials mainly depends on the content and stability of hydrate calcium silicate (C-S-H) gel and Friedel’s salt, and the high content and the great stability of both are benefit to improve the chloride ion binding ability. The influences of various factors, such as ceme
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2604 (2022)
Deterioration Mechanism of Supersulfated Cement Paste by Acid Erosion
GAO Fuhao, WANG Lu, and LIU Shuhua
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2618 (2022)
Effect of EVA on Microstructure and Mechanical Properties of Calcium Sulfoaluminate Cement Paste
HE Xiangxiang, MEI Junpeng, JIANG Tianhua, LI Hainan, XU Zhidong, WANG Zhixin, ZHOU Lanlan, and ZHOU Zhiyang
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2628 (2022)
Effect of SO2-4/C3A Ratio on Formation of Thaumasite in Monomineral C3S Cement Paste
LI Xiangguo, TIAN Bo, HE Chao, LYU Yang, JIAN Shouwei, JIANG Dongbing, ZHANG Cheng, and ZHOU Yang
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2637 (2022)
CO2 Corrosion Kinetics of C3S in Cement Single Ore under CCUS Environment
GAO Qiang, MEI Kaiyuan, WANG Dekun, ZHANG Liwei, ZHANG Chunmei, and CHENG Xiaowei
Under the carbon capture, utilization and storage (CCUS) well, the oil well cement will be carbonized and corroded due to the long-term action of downhole high temperature, high pressure and highly acidic fluid, resulting in the failure of the cement sheath. In order to simulate the carbonation and corrosion environmen
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2644 (2022)
Effect of Potassium Hydroxide-Sodium Water Glass Activator on Properties of Alkali-Activated Slag Cementitious Materials
WANG Lingling, SI Chenyu, LI Chang, SUN Xiaowei, ZHOU Honghong, and GUO Shimeng
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2654 (2022)
Interface Modification of Water Absorbent Microcapsules to Improve Impermeability of Cement-Based Materials
ZHANG Lu, MAO Qianjin, WU Wenwen, LI Runfeng, HAN Lei, WANG Ziming, and CUI Suping
In self-healing cement-based materials, the interface between microcapsules and cement matrix determines the probability of microcapsules triggered by cracks, which affects the self-healing effect. Aiming at the interface bonding problem of water absorbent microcapsules, the surface of epoxy/calcium alginate microcapsu
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2663 (2022)
Influence of Oxygen Concentration on Reinforcement Corrosion in Seawater Sea-Sand Mortar Based on Wire Beam Electrode Technique
GAO Yuan, JIN Zuquan, and LI Ning
To find out the influence of oxygen concentration on reinforcement corrosion in seawater sea-sand mortar, the wire beam electrode (WBE) technique was introduced. The influences of oxygen concentration (5%, 21%, 85%, volume fraction) and water-binder ratio (W/B) (0.48, 0.18) on time-dependent behavior of corrosion poten
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2672 (2022)
Basalt Fiber Reinforced Polymer Bar Reinforced ECC
OUYANG Jianxin, GUO Rongxin, WAN Fuxiong, MA Qianmin, and YANG Yang
Engineered cementitious composite (ECC) has become a research hotspot because of its high toughness and multiple cracking characteristics. Fiber reinforced polymer (FRP) has attracted extensive attention because of its high tensile strength, low density and good corrosion resistance. In order to study the tensile prope
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2684 (2022)
Experimental Study on Electrical Properties of Carbon Fiber-Steel Fiber Cement Matrix Composites
WANG Congcong, DU Hongxiu, SHI Lina, and FAN Qi
To optimize the electrical properties of cement matrix composites, carbon fiber (CF) and steel fiber (SF) were added into the composites as conductive materials, and the influence of the volume content of carbon fiber and steel fiber on the compressive strength and electrical properties of cement matrix composites were
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2696 (2022)
Chloride Penetration Resistance of Ultra-High Performance Concrete under Hydrostatic Pressure
WEI Jiangang, CHEN Rong, HUANG Wei, CHEN Zhendong, CHEN Baochun, CHEN Peibiao, and ZHU Weidong
The pore structure of ultra-high performance concrete (UHPC) was analyzed by nitrogen adsorption and desorption (NAD) test in this paper. The influence of steel fiber and mineral admixture on the chloride ion transport behavior of UHPC under different hydrostatic pressures were investigated. Scanning electron microscop
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2706 (2022)
Relationship Between Pore Structure, Fractal Dimension and Chloride Diffusion Performance of Concrete
ZHANG Qingzhang, FANG Yan, SONG Li, XU Ning, and KANG Zihan
Chloride diffusion coefficient is one of the important parameters to study the durability of concrete structures in marine environment. Through mercury intrusion test and salt spray diffusion test of concrete with different water-binder ratios, the influences of porosity, pore size distribution and critical pore size o
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2716 (2022)
Damage Properties of Fiber Concrete under Coupling Effect of Continuous Loading and Freeze-Thaw Cycles
SUN Jie, FENG Chuan, WU Shuang, MA Wen, and SUN Mingxing
In order to study the damage performance of fiber concrete under the coupling effect of continuous loading and freeze-thaw cycles, the freeze-thaw cycle experiment of fiber concrete was performed under the effect of different compressive stress levels (0, 0.3, 0.5), some parameters, such as test mass loss, relative dyn
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2728 (2022)
Deflection and Ductility of FRP Bars Reinforced Concrete Superposed Beams
ZHANG Jianbo, CHEN Shengping, and LU Yingfa
In order to improve the flexural behavior and ductility of fiber reinforced polymer (FRP) bars reinforced concrete superposed beams, the effects of steel fiber content and thickness of steel fiber reinforced concrete superposed layer on the FRP bars reinforced concrete beams were studied. The volume content of steel fi
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2739 (2022)
Experimental Study on Performance Optimization of Pervious Recycled Concrete Based on Orthogonal Test
XIA Dongtao, LI Xiangyang, and HU Jun’an
Pervious concrete has wide application prospects in alleviating urban waterlogging, noise effect and heat island effect, but its low strength due to porosity limits its further application. The recycled coarse aggregate and polypropylene fiber were used to formulate high performance pervious concrete. A five-factor, fo
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2748 (2022)
Effects of Chopped Carbon Fibers on Pore Structure and Characteristics of Concrete
WANG Huizi, NIE Liangxue, LUO Xin, and LIU Pengcheng
For the purpose of explore the effects of chopped carbon fibers (CFs) on the microscopic characteristics of the internal pore structure of concrete, chopped carbon fibers reinforced concrete (CFC) specimens with volume content of 0%, 0.1%, 0.2%, 0.3% and 0.5% of CFs were prepared. The internal pore structure characteri
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2759 (2022)
Experimental Study on Bond-Slip Mechanical Properties of Concrete with Different Admixtures and Corroded Reinforcement
ZHUANG Binbin, XIAO Chaoxiong, LIU Qiang, DENG Jiahui, and WANG Dayang
The center-drawing method was used to conduct bond-slip tests on plain concrete (PC), cementitious capillary crystalline water-proofing concrete (CCCW), and polypropylene fiber reinforced concrete (PFRC) with hot-rolled ribbed steel reinforcement. To investigate the bonding capability of the reinforcement with concrete
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2767 (2022)
Study on Steel Wire Grid Tile Insulation Roof Panel and Its Bending Resistance
SUN Shibing, LI Dayun, LYU Feng, WANG Wanfu, TIAN Yingliang, JIN Xiaodong, WANG Yingshun, WANG Shuyuan, XIN Zhubin, and JIANG Lisong
The roof system of traditional houses in villages and towns is mostly slope roof system. The traditional slope roof system has complex construction, poor safety and insufficient thermal insulation, which can not meet the needs of building a new countryside. A new type of steel wire gride tile insulation roof panel was
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2774 (2022)
Adsorption of F- on Calcite Surface and Its Effect on Calcite Surface Properties
YIN Yulan, CHEN Junhong, XIE Yan, and AO Xianquan
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2785 (2022)
Effect of Ferronickel Slag Sand on Pore Structure and Shrinkage Cracking of Foamed Concrete
XIONG Yuanliang, ZHU Yu, LI Baoliang, CHEN Chun, and ZHANG Yamei
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2792 (2022)
Characteristics of Yunfu Pyrite Tailings and Performance Analysis as Auxiliary Cementitious Materials
YIN Suhong, ZENG Shaohong, CAO Wenxiang, and WU Huanxun
Yunfu pyrite tailings have a huge storage capacity, which affects the surrounding environment and wastes resources. In this paper, the feasibility of high absorption utilization of tailings used as auxiliary cementitious materials was discussed, the mineral and chemical composition of tailings and the occurrence state
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2800 (2022)
Mechanical Activation of High Silicon Iron Tailings and Its Mechanism
LIANG Zhipeng, SUN Chang, BI Wanli, ZHAO Mingze, and GUAN Yan
In order to promote engineering application of iron tailings, taking Benxi high silicon iron tailings in Liaoning Province as an example, the effects of different mechanical activation methods and time on the activity and morphology of iron tailings were studied. The effect of mechanical activation on the particle size
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2810 (2022)
Manufacture and Microstructural Characterization of Fly Ash-Muck Artificial Aggregates with High Strength
ZHANG Rihong, MING Wei, WAN Wenhao, and LIU Yunpeng
The effect of different proportion of engineering muck and fly ash on the physical properties of artificial aggregates with high strength and low water absorption was studied. Moreover, the mineral composition, microstructure and porosity of artificial aggregates were characterized by X-ray diffractometer, X-ray comput
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2819 (2022)
Whiskers Growth and Mechanism Analysis by Titanium Gypsum under Alkaline Conditions
HUANG Jia, JIN Yingrong, YANG Hualin, CHEN Wei, LI Yuling, and WANG Zhijie
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2828 (2022)
Influence of Phosphogypsum Particle Size on Properties and Microstructure of Wet-Mixed Mortar
ZHANG Yue, WANG Hongjie, YANG Lin, CHEN Hong, and CAO Jianxin
Four kinds of phosphogypsum with different particle sizes were selected and mixed with mechanical sand, cement and admixtures to prepare wet-mixed mortar. The effects of phosphogypsum particle size on the workability and mechanical properties of mortar were investigated, and the mechanism of phosphogypsum particle size
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2836 (2022)
Sodium Sulfate Corrosion Resistance of Gypsum Slag Cement Concrete
KONG Yaning, ZHOU Jianwei, GAO Yuxin, YANG Wen, YU Baoying, and CHENG Baojun
Gypsum slag cement with low hydration heat and good chemical erosion resistance is a low carbon dioxide emission green cementitious material. To clearify to the effect of raw materials on the resistance of gypsum slag cement concrete to sulfate attack, the strength development and sodium sulfate corrosion resistance of
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2844 (2022)
Effect of Regenerated Micropowder on Properties of Dry Mixed Mortar
GAO Min, GUO Qilong, DU Lei, HUA Liang, LIU Ronghao, WANG Chunya, and MA Zhitong
In order to promote the recycling and utilization of construction waste, the dry mixed mortar was prepared by replacing part of cement with regenerated micropowder, and the effects of the fineness, content and compounding ratio of the regenerated micropowder on the consistency, compressive strength, flexural strength a
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2851 (2022)
Research Progress on Control and Preparation of Vaterite-Type Calcium Carbonate
WANG Xin, WEI Ming, and LIU Kun
Vaterite-type calcium carbonate has unique physical, chemical, biological and mechanical properties, and has great application prospects in the fields of daily use, biological medicine, building materials and new materials. However, vaterite-type calcium carbonate is the most unstable thermodynamically stable one among
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2860 (2022)
Recent Progress on Modification of Garnet Li7La3Zr2O12 Solid-State Electrolyte
LI Jinyao, DONG Shengde, MA Luxiang, and ZHOU Yuan
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2871 (2022)
Preparation of Boron Carbonitride Porous Material and Its Adsorption and Regeneration Performance
LIN Guoqiang, GUO Yucheng, XU Meng, LI Jianbao, CHEN Yongjun, and LUO Lijie
Boron carbonitride (BCN) porous material is considered as an excellent adsorption material due to its high specific surface area and excellent chemical stability. In this paper, porous embryos were prepared by freeze-drying method and BCN porous material was synthesized by high-temperature solid-phase reaction method u
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2879 (2022)
Effect of Pre-Oxidation on Microstructure and Flexural Strength of Reaction Boned Silicon Carbide
HAO Hongjian, LI Haiyan, WAN Detian, BAO Yiwang, and LI Yueming
In this paper, a simple and effective pre-oxidation treatment method is proposed to strengthen reaction boned silicon carbide (RBSC). The effects of different temperature oxidation treatments from 800 ℃ to 1 300 ℃ on its microstructure and mechanical properties were investigated. Changes of residual flexural strength o
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2889 (2022)
Effect of PyC Coating on Properties of SiC Nanofiber Reinforced SiC Ceramic Matrix Composites
XIONG Yilian, TAO Jiyu, YANG Jiahao, CHEN Jianjun, and ZHENG Junyi
In this work, SiC nanofiber reinforced SiC (SiCnf/SiC) ceramic matrix composites with 10% (mass fraction) of nanofiber were fabricated by the hot pressing (HP) using SiC nanofiber as reinforcement, which were coated with pyrolysis carbon (PyC) via chemical vapor deposition, SiC powders as matrix and Al2O3-Y2O3 as sinte
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2896 (2022)
Experimental Study on Crystallization of Anhydrous Magnesium Carbonate Crystals Regulated by Amino Acids
CUI Wanshun, WEN Weixiang, YAN Pingke, GAO Yujuan, and BAI Yang
Anhydrous magnesium carbonate crystal as a new inorganic functional material has attracted the attention of researchers. In this paper, anhydrous magnesium carbonate crystal was synthesized by using magnesium chloride as raw material and sodium carbonate as precipitant. And four different kinds of amino acids, named gl
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2904 (2022)
Action Mechanism and Research Progress of Flux and Adhesive on Glass Lining
ZHENG Jiexi, GONG Kuiyuan, ZHANG Hongyang, XUE Hongxi, XU Kunshan, and LIU Jie
Glass lining is a composite material that is sprayed with glass-lined glaze on the metal surface and adhered by high-temperature glass-lined glaze. It has the chemical stability of glass, and the excellent characteristics of high hardness and high strength of metal materials. At the same time, the surface is smooth and
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2918 (2022)
Preparation of ZSM-5@t-ZrO2 and Its Influence Mechanism on Catalytic Synthesis of Methanethiol
PEI Lijie, LIU Fei, CAO Jianxin, YANG Anjie, YAO Mengqin, and LIU Piao
The composite catalysts of ZSM-5@t-ZrO2 and ZSM-5/t-ZrO2 were prepared by hydrothermal coating method and physical blending method, respectively. Taking catalysts of t-ZrO2 and ZSM-5 as reference, catalytic performance, physical and chemical properties of the composite catalysts with different structures were studied.
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2927 (2022)
Synthesis and Photocatalytic Properties of Polyhydroxylated Fullerenes Modified Nitrogen-Doped Titanium Dioxide Composites
CHEN Yifan, TANG Guoqin, ZHAO Chunxia, and CHEN Yekai
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2935 (2022)
Preparation and Electrochemical Properties of Rigid Skeleton COS-NMC Material
HE Shunwu, TIAN Hongsong, LI Ying, YE Entong, ZHANG Li, LIN Qian, and PAN Hongyan
An in-situ nitrogen-doped mesoporous carbon material (COS-NMC-x) for supercapacitors was prepared by sol-gel method using chitosan oligosac charide (COS) as carbon precursor, triblock copolymer (F127) and ethyl orthosilicate (TEOs) as templating agent. The material was characterized by means of mass spectrometer, TG-DT
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2943 (2022)
Preparation of KBaB5O9 by Two-Step Method and Its Process Kinetics
QUAN Zhilin, LI Zhixiang, JIAO Bin, ZHOU Xianwei, XIANG Dexing, FENG Xiaoqin, and HUANG Hongsheng
Bulletin of the Chinese Ceramic Society
  • Publication Date: Jan. 01, 1900
  • Vol. 41, Issue 8, 2954 (2022)