• Journal of Inorganic Materials
  • Vol. 36, Issue 10, 1103 (2021)
Junmin ZHANG1、2、3, Xiaowu CHEN1、2、*, Chunjin LIAO1、2, Feiyu GUO1、2、3, Jinshan YANG1、2, Xiangyu ZHANG1、2, and Shaoming DONG1、2、*
Author Affiliations
  • 11. State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
  • 22. Structural Ceramics and Composites Engineering Research Center, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
  • 33. School of Physical Science and Technology, Shanghai Tech University, Shanghai 200031, China
  • show less
    DOI: 10.15541/jim20210091 Cite this Article
    Junmin ZHANG, Xiaowu CHEN, Chunjin LIAO, Feiyu GUO, Jinshan YANG, Xiangyu ZHANG, Shaoming DONG. Optimizing Microstructure and Properties of SiCf/SiC Composites Prepared by Reactive Melt Infiltration [J]. Journal of Inorganic Materials, 2021, 36(10): 1103 Copy Citation Text show less
    References

    [1] Y ZHU, S WANG, W LI et al. Preparation of carbon fiber-reinforced zirconium carbide matrix composites by reactive melt infiltration at relative low temperature. Scripta Materialia, 67, 822-825(2012).

    [2] J WANG, M LIN, Z XU et al. Microstructure and mechanical properties of C/C-SiC composites fabricated by a rapid processing method. J. Eur. Ceram. Soc., 29, 3091-3097(2009).

    [3] T TIAN J, K SHOBU. Fabrication of silicon carbide-mullite composite by melt infiltration. J. Am. Ceram. Soc., 86, 39-42(2003).

    [4] M SINGH, E ALMAN D, A HAWK J. Microstructure and Wear Behavior of SiC-based Composites Fabricated by Melt Infiltration. Roll of Characterization in Understanding Environmental Degradation of Materials, ASM International, 169-175(1998).

    [5] X WANG Y, H TAN S, L JIANG D. The effect of porous carbon preform and the infiltration process on the properties of reaction- formed SiC. Carbon, 42, 1833-1839(2004).

    [6] Z JIANG S, X XIONG, K CHEN Z et al. Influence factors of C/C-SiC dual matrix composites prepared by reactive melt infiltration. Materials & Design, 30, 3738-3742(2009).

    [7] D WANG, M DONG S, J ZHOU H et al. Fabrication and microstructure of 3D Cf/ZrC-SiC composites: through RMI method with ZrO2 powders as pore-making agent. Ceram. Int., 42, 6720-6727(2016).

    [8] J ROGER, G CHOLLON. Mechanisms and kinetics during reactive infiltration of molten silicon in porous graphite. Ceram. Int., 45, 8690-8699(2019).

    [9] S PILLLEE, H KIYOON, J SOOPARK et al. Processing and properties of SiC and SiC/SiC composite materials by melt infiltration process. International Journal of Modern Physics B, 17, 1833-1838(2003).

    [10] W WASHBURN E. The dynamics of capillary flow. Physical Review, 17, 273-283(1921).

    [11] V BOUGIOURI, R VOYTOVYCH, N ROJO-CALDERON et al. The role of the chemical reaction in the infiltration of porous carbon by NiSi alloys. Scripta Materialia, 54, 1875-1878(2006).

    [12] S KUMAR, A KUMAR, A SHUKLA et al. Capillary infiltration studies of liquids into 3D-stitched C-C preforms Part A: Internal pore characterization by solvent infiltration, mercury porosimetry, and permeability studies. J. Eur. Ceram. Soc., 29, 2643-2650(2009).

    [13] S KUMAR, A KUMAR, R DEVI et al. Capillary infiltration studies of liquids into 3D-stitched C-C preforms Part B: Kinetics of silicon infiltration. J. Eur. Ceram. Soc., 29, 2651-2657(2009).

    [14] Y WANG, X ZHU, L ZHANG et al. C/C-SiC-ZrC composites fabricated by reactive melt infiltration with Si0.87Zr0.13 alloy. Ceram. Int., 38, 4337-4343(2012).

    [15] W CHEN X, W NI D, M KAN Y et al. Reaction mechanism and microstructure development of ZrSi2 melt-infiltrated Cf/SiC-ZrC- ZrB2 composites: the influence of preform pore structures. Journal of Materiomics, 4, 266-275(2018).

    [16] W CHEN X, Q FENG, M KAN Y et al. Effects of preform pore structure on infiltration kinetics and microstructure evolution of RMI-derived Cf/SiC-ZrC-ZrB2 composite. J. Eur. Ceram. Soc., 40, 2683-2690(2020).

    [17] Q ZHONG, Y ZHANG X, M DONG S et al. Reactive melt infiltrated Cf/SiC composites with robust matrix derived from novel engineered pyrolytic carbon structure. Ceram. Int., 43, 5832-5836(2017).

    [18] P LEE S, S PARK J, Y KATOH et al. Process, microstructure and flexural properties of reaction sintered Tyranno SA/SiC composites. Journal of Nuclear Materials, 307, 1191-1195(2002).

    [19] Y ZHAO Y, Y XIA H, R TANG et al. A low cost preparation of C/SiC composites by infiltrating molten Si into gelcasted pure porous carbon preform. Ceram. Int., 41, 6478-6487(2015).

    [20] M SINGH, C FARMER S. Morphological characterization of microporous carbon materials. Journal of Materials Science Letters, 16, 946-949(1997).

    [21] O LEVENSPIEL. Ingenieria de las Reacciones. 2nd ed. Wiley (ed.). Barcelona: Revertre(1978).

    [22] H HON M, F DAVIS R. Self-diffusion of C-14 in polycrystalline beta-sic. J. Mater. Sci., 14, 2411-2421(1979).

    Junmin ZHANG, Xiaowu CHEN, Chunjin LIAO, Feiyu GUO, Jinshan YANG, Xiangyu ZHANG, Shaoming DONG. Optimizing Microstructure and Properties of SiCf/SiC Composites Prepared by Reactive Melt Infiltration [J]. Journal of Inorganic Materials, 2021, 36(10): 1103
    Download Citation