[1] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[2] Gu D D, Shi X Y, Poprawe R et al. Material-structure-performance integrated laser-metal additive manufacturing[J]. Science, 372, eabg1487(2021).

[3] Liu Y B, Li J K, Xu K et al. An optimized scanning strategy to mitigate excessive heat accumulation caused by short scanning lines in laser powder bed fusion process[J]. Additive Manufacturing, 60, 103256(2022).

[4] Tofail S A M, Koumoulos E P, Bandyopadhyay A et al. Additive manufacturing: scientific and technological challenges, market uptake and opportunities[J]. Materials Today, 21, 22-37(2018).

[5] Li J J, Ouyang D, Li J K et al. New insight into the strengthening mechanism of AlCoCrFeNi2.1 eutectic high-entropy alloy with dual-phase nanolamellar structures achieved via laser powder bed fusion[J]. Materials Science and Engineering: A, 887, 145784(2023).

[6] Li J K, Cheng T, Liu Y B et al. Simultaneously enhanced strength and ductility of Cu-15Ni-8Sn alloy with periodic heterogeneous microstructures fabricated by laser powder bed fusion[J]. Additive Manufacturing, 54, 102726(2022).

[7] Tan C L, Weng F, Sui S et al. Progress and perspectives in laser additive manufacturing of key aeroengine materials[J]. International Journal of Machine Tools and Manufacture, 170, 103804(2021).

[8] Haberland C, Elahinia M, Walker J M et al. On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing[J]. Smart Material Structures, 23, 104002(2014).

[9] Babacan N, Pauly S, Gustmann T. Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy[J]. Materials & Design, 203, 109625(2021).

[10] Ferretto I, Kim D, Della Ventura N M et al. Laser powder bed fusion of a Fe-Mn-Si shape memory alloy[J]. Additive Manufacturing, 46, 102071(2021).

[11] Xie Y, Teng Q, Shen M Y et al. Study on microstructure and properties of overlap region of GH3536 alloy processed by multi-laser powder bed fusion[J]. Chinese Journal of Lasers, 50, 0802303(2023).

[12] Li J K, Zhang Z W, Yang Y Q et al. Single-track morphology, crystal orientation and microstructure of DD91 nickel-based single crystal superalloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 49, 1402103(2022).

[13] Xie Y, Teng Q, Shen M Y et al. The role of overlap region width in multi-laser powder bed fusion of Hastelloy X superalloy[J]. Virtual and Physical Prototyping, 18, e2142802(2023).

[14] Zhao D L, Yu K D, Sun T F et al. Material-structure-function integrated additive manufacturing of degradable metallic bone implants for load-bearing applications[J]. Advanced Functional Materials, 33, 2213128(2023).

[15] Zhang Z, Song B, Wang X B et al. Research status and trend of design and addictive manufacturing for mechanical metamaterials with energy absorption[J]. Chinese Journal of Lasers, 49, 1402301(2022).

[16] Svetlizky D, Das M, Zheng B L et al. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications[J]. Materials Today, 49, 271-295(2021).

[17] Zhang Z Y, Li J K, Cheng T et al. Simultaneously enhanced strength and ductility of AlSi7Mg alloy fabricated by laser powder bed fusion with on-line static magnetic field[J]. Virtual and Physical Prototyping, 18, e2161918(2023).

[18] Cai C, Wu X, Liu W et al. Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance[J]. Journal of Materials Science & Technology, 57, 51-64(2020).

[19] Dang M Z, Xiang H H, Li J K et al. Laser powder bed fusion of full martensite Cu-Al-Mn-Ti alloy with good superelasticity and shape memory effect[J]. Materials Science and Engineering: A, 884, 145475(2023).

[20] Tian J, Wei Q S, Zhu W Z et al. Selective laser melting process and mechanical properties of Cu-Al-Ni-Ti alloy[J]. Chinese Journal of Lasers, 46, 0302001(2019).

[21] Teng Q, Li S, Wei Q S et al. Investigation on the influence of heat treatment on Inconel 718 fabricated by selective laser melting: microstructure and high temperature tensile property[J]. Journal of Manufacturing Processes, 61, 35-45(2021).

[22] Shen M Y, Xie Y, Li J K et al. Influence of laser power on microstructure and properties of overlap region in dual-laser powder bed fusion of GH3536 superalloy[J]. Chinese Journal of Lasers, 50, 2402301(2023).

[23] Gao C D, Li S, Liu L et al. Dual alloying improves the corrosion resistance of biodegradable Mg alloys prepared by selective laser melting[J]. Journal of Magnesium and Alloys, 9, 305-316(2021).

[24] Li W, Li J K, Duan X Y et al. Dislocation-induced ultra-high strength in a novel steel fabricated using laser powder-bed-fusion[J]. Materials Science and Engineering: A, 832, 142502(2022).

[25] Li H, Zhao W J, Li R D et al. Progress on additive manufacturing of maraging steel[J]. Chinese Journal of Lasers, 49, 1402102(2022).

[26] Wei Q S, Xie Y, Teng Q et al. Crack types, mechanisms, and suppression methods during high-energy beam additive manufacturing of nickel-based superalloys: a review[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100055(2022).

[27] Huang Y Z, Fleming T G, Clark S J et al. Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing[J]. Nature Communications, 13, 1170(2022).

[28] Mostafaei A, Zhao C, He Y N et al. Defects and anomalies in powder bed fusion metal additive manufacturing[J]. Current Opinion in Solid State and Materials Science, 26, 100974(2022).

[29] Yang G, Xie Y L, Zhao S et al. Quality control: internal defects formation mechanism of selective laser melting based on laser-powder-melt pool interaction: a review[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100037(2022).

[30] Guo L P, Wang H Z, Liu H J et al. Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy[J]. International Journal of Machine Tools and Manufacture, 184, 103977(2023).

[31] Li J J, Ouyang D, Wang Q H et al. Achieving superior tensile strength of CoCrFeNiTi0.3 high-entropy alloy via in situ laser powder bed fusion of CoCrFeNi and Ti[J]. Materials Science and Engineering: A, 886, 145649(2023).

[32] Guo C, Yu Z R, Hu X G et al. Y2O3 nanoparticles decorated IN738LC superalloy manufactured by laser powder bed fusion: cracking inhibition, microstructures and mechanical properties[J]. Composites Part B: Engineering, 230, 109555(2022).

[33] Wilms M B, Rittinghaus S K, Goßling M et al. Additive manufacturing of oxide-dispersion strengthened alloys: materials, synthesis and manufacturing[J]. Progress in Materials Science, 133, 101049(2023).

[34] Li J K, Zhang Z W, Xu W H et al. Hot isostatic pressing of Cu-15Ni-8Sn alloy with suppressed Sn macro-segregation and enhanced mechanical properties[J]. Materials Science and Engineering: A, 855, 143866(2022).

[35] Cai C, Gao X Y, Teng Q et al. Hot isostatic pressing of a near α-Ti alloy: temperature optimization, microstructural evolution and mechanical performance evaluation[J]. Materials Science and Engineering: A, 802, 140426(2021).

[36] Teng Q, Wei Q S, Xue P J et al. Effects of processing temperatures on FGH4097 superalloy fabricated by hot isostatic pressing: microstructure evolution, mechanical properties and fracture mechanism[J]. Materials Science and Engineering: A, 739, 118-131(2019).

[37] Sun S S, Teng Q, Cheng T et al. Influence of heat treatment on microstructure evolution of GH3536 superalloy fabricated by selective laser melting[J]. Journal of Mechanical Engineering, 56, 208-218(2020).

[38] Sun S S, Teng Q, Xie Y et al. Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductility[J]. Additive Manufacturing, 46, 102168(2021).

[39] Hu Y B. Recent progress in field-assisted additive manufacturing: materials, methodologies, and applications[J]. Materials Horizons, 8, 885-911(2021).

[40] Lin Y, Hu J S. Laser beam shaping techniques[J]. Laser Journal, 29, 1-4(2008).

[41] Long Y, Huang W, Guo X et al. Selective laser melting 3D printing using non-traditional laser beam: a review[J]. Aeronautical Manufacturing Technology, 65, 34-48(2022).

[42] Bi J, Wu L K, Li S D et al. Beam shaping technology and its application in metal laser additive manufacturing: a review[J]. Journal of Materials Research and Technology, 26, 4606-4628(2023).

[43] Gussone J, Rackel M W, Tumminello S et al. Microstructure formation during laser powder bed fusion of Ti-22Al-25Nb with low and high pre-heating temperatures[J]. Materials & Design, 232, 112154(2023).

[44] Qin S Y, Saewe J, Kunz J et al. Influence of preheating temperature on microstructure evolution and hardness of high-speed steel AISI M50 processed by laser powder bed fusion[J]. Steel Research International, 94, 2200784(2023).

[45] Wang W H, Lin W H, Yang R et al. Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature[J]. Materials & Design, 213, 110355(2022).

[46] Guo S, Sui S, Wang M et al. Simultaneously optimizing the strength and ductility of high-entropy alloys by magnetic field-assisted additive manufacturing[J]. Journal of Alloys and Compounds, 947, 169688(2023).

[47] Zhang B, Shirvani K, Taheri M et al. Effect of TiC and magnetic field on microstructure and mechanical properties of IN738 superalloy processed by selective laser melting[J]. Journal of Materials Engineering and Performance, 33, 3494-3509(2024).

[48] Wu W H, Zhai W, Wang J Y et al. Progress of cavitation and acoustic streaming dynamics of liquid materials within ultrasonic field[J]. Science China Technological Sciences, 53, 2-27(2023).

[49] Kosiba K, Gustmann T, Kim J T et al. Experimental cooling rates during high-power laser powder bed fusion at varying processing conditions[J]. Journal of Alloys and Compounds, 967, 171773(2023).

[50] Galbusera F, Caprio L, Previtali B et al. The influence of novel beam shapes on melt pool shape and mechanical properties of LPBF produced Al-alloy[J]. Journal of Manufacturing Processes, 85, 1024-1036(2023).

[51] Chen B, Bian Y H, Li Z Y et al. Effect of laser beam profile on thermal transfer, fluid flow and solidification parameters during laser-based directed energy deposition of Inconel 718[J]. Materials, 16, 4221(2023).

[52] Gil E, Mancisidor A M, Iturrioz A et al. Cracking susceptibility of maraging parts manufactured by laser powder bed fusion additive manufacturing: study on the powder characteristics and baseplate preheating influence[J]. Powder Metallurgy, 66, 416-426(2023).

[53] Zhou L, Chen S Y, Jia W M et al. Effects of preheating-ultrasonic synergistic on the microstructure and strength-ductility of 24CrNiMoY alloy steel by laser directed energy deposition[J]. Materials Science and Engineering: A, 863, 144463(2023).

[54] Zhou Y, Qu W Y, Zhou F et al. Thermo-fluid flow behavior of the IN718 molten pool in the laser directed energy deposition process under magnetic field[J]. Rapid Prototyping Journal, 29, 460-473(2023).

[55] Frieden B R. Lossless conversion of a plane laser wave to a plane wave of uniform irradiance[J]. Applied Optics, 4, 1400-1403(1965).

[56] Sow M C, de Terris T, Castelnau O et al. Influence of beam diameter on laser powder bed fusion (L-PBF) process[J]. Additive Manufacturing, 36, 101532(2020).

[57] Wang K, Xie D Q, Lü F et al. Stability of molten pool and microstructure evolution of Ti-6Al-4V during laser powder bed fusion with a flat-top beam[J]. Additive Manufacturing, 75, 103756(2023).

[58] Belay G Y, Kinds Y, Goossens L et al. Dynamic optical beam shaping system to generate Gaussian and top-hat laser beams of various sizes with circular and square footprint for additive manufacturing applications[J]. Procedia CIRP, 111, 75-80(2022).

[59] Huang S, Narayan R L, Tan J H K et al. Resolving the porosity-unmelted inclusion dilemma during in situ alloying of Ti34Nb via laser powder bed fusion[J]. Acta Materialia, 204, 116522(2021).

[60] Yuan W H, Chen H, Li S et al. Understanding of adopting flat-top laser in laser powder bed fusion processed Inconel 718 alloy: simulation of single-track scanning and experiment[J]. Journal of Materials Research and Technology, 16, 1388-1401(2022).

[61] Wang Y C, Shi J. Developing very strong texture in a nickel-based superalloy by selective laser melting with an ultra-high power and flat-top laser beam[J]. Materials Characterization, 165, 110372(2020).

[62] Jodi D E, Kitashima T, Koizumi Y et al. Manufacturing single crystals of pure nickel via selective laser melting with a flat-top laser beam[J]. Additive Manufacturing Letters, 3, 100066(2022).

[63] Montero-Sistiaga M L, Godino-Martinez M, Boschmans K et al. Microstructure evolution of 316L produced by HP-SLM (high power selective laser melting )[J]. Additive Manufacturing, 23, 402-410(2018).

[64] Montero-Sistiaga M L, Pourbabak S, Van Humbeeck J et al. Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)[J]. Materials & Design, 165, 107598(2019).

[65] Liu Y, Wang Y C, Savinov R et al. Epitaxial growth of a single-crystal nickel-based superalloy during laser melting with high-power flat-top laser[J]. Optics & Laser Technology, 144, 107444(2021).

[66] Jodi D E, Kitashima T, Singh A et al. High-temperature microstructural stability of pure Ni fabricated by laser powder bed fusion using Gaussian and flat-top beam profiles[J]. Materials Characterization, 200, 112897(2023).

[67] Jodi D E, Kitashima T, Watanabe M. Effect of scan strategy on the formation of a pure nickel single-crystal structure using a flat-top laser beam via laser powder bed fusion[J]. Science and Technology of Advanced Materials, 24, 2201380(2023).

[68] Liu M N, Wei K W, Yue X Z et al. High power laser powder bed fusion of AlSi10Mg alloy: effect of laser beam mode[J]. Journal of Alloys and Compounds, 909, 164779(2022).

[69] Okunkova A A, Peretyagin P Y, Podrabinnik P A et al. Development of laser beam modulation assets for the process productivity improvement of selective laser melting[J]. Procedia IUTAM, 23, 177-186(2017).

[70] Pilz S, Gustmann T, Günther F et al. Controlling the Youngs modulus of a ß-type Ti-Nb alloy via strong texturing by LPBF[J]. Materials & Design, 216, 110516(2022).

[71] Meng G R, Gong Y D, Zhang J D et al. Microstructure and mechanical properties of Inconel 718 thin walls prepared by laser direct energy deposition and selective laser melting[J]. Thin-Walled Structures, 193, 111284(2023).

[72] Chen Y, Guo Y B, Xu M J et al. Study on the element segregation and Laves phase formation in the laser metal deposited IN718 superalloy by flat top laser and Gaussian distribution laser[J]. Materials Science and Engineering: A, 754, 339-347(2019).

[73] Wang A, Wei Q L, Luo S et al. Blue laser directed energy deposition of aluminum with synchronously enhanced efficiency and quality[J]. Additive Manufacturing Letters, 5, 100127(2023).

[74] Wang A, Wei Q L, Tang Z J et al. Effects of processing parameters on pore defects in blue laser directed energy deposition of aluminum by in and ex situ observation[J]. Journal of Materials Processing Technology, 319, 118068(2023).

[75] Kim C K, Jeong J I, Choi S G et al. High-throughput directed energy deposition process with an optimized scanning nozzle[J]. Journal of Materials Processing Technology, 295, 117165(2021).

[76] Cheng M P, Xiao X F, Luo G Y et al. Effect of laser intensity profile on the microstructure and texture of Inconel 718 superalloy fabricated by direct energy deposition[J]. Journal of Materials Research and Technology, 18, 2001-2012(2022).

[77] Wang R, Wang J, Cao T W et al. Microstructure characteristics of a René N5 Ni-based single-crystal superalloy prepared by laser-directed energy deposition[J]. Additive Manufacturing, 61, 103363(2023).

[78] Cloots M, Uggowitzer P J, Wegener K. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles[J]. Materials & Design, 89, 770-784(2016).

[79] Wischeropp T M, Tarhini H, Emmelmann C. Influence of laser beam profile on the selective laser melting process of AlSi10Mg[J]. Journal of Laser Applications, 32, 022059(2020).

[80] Grigoriev S N, Gusarov A V, Metel A S et al. Beam shaping in laser powder bed fusion: Péclet number and dynamic simulation[J]. Metals, 12, 722(2022).

[81] Duocastella M, Arnold C B. Bessel and annular beams for materials processing[J]. Laser & Photonics Reviews, 6, 607-621(2012).

[82] Grünewald J, Gehringer F, Schmöller M et al. Influence of ring-shaped beam profiles on process stability and productivity in laser-based powder bed fusion of AISI 316L[J]. Metals, 11, 1989(2021).

[83] Nahr F, Bartels D, Rothfelder R et al. Influence of novel beam shapes on laser-based processing of high-strength aluminium alloys on the basis of EN AW-5083 single weld tracks[J]. Journal of Manufacturing and Materials Processing, 7, 93(2023).

[84] Tumkur T U, Voisin T, Shi R P et al. Nondiffractive beam shaping for enhanced optothermal control in metal additive manufacturing[J]. Science Advances, 7, eabg9358(2021).

[85] Roehling T T, Wu S S Q, Khairallah S A et al. Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing[J]. Acta Materialia, 128, 197-206(2017).

[86] Roehling T T, Shi R P, Khairallah S A et al. Controlling grain nucleation and morphology by laser beam shaping in metal additive manufacturing[J]. Materials & Design, 195, 109071(2020).

[87] Shi R P, Khairallah S A, Roehling T T et al. Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy[J]. Acta Materialia, 184, 284-305(2020).

[88] Zhong Q, Wei K W, Lu Z A et al. High power laser powder bed fusion of Inconel 718 alloy: effect of laser focus shift on formability, microstructure and mechanical properties[J]. Journal of Materials Processing Technology, 311, 117824(2023).

[89] Nie X J, Chen Z, Qi Y et al. Effect of defocusing distance on laser powder bed fusion of high strength Al-Cu-Mg-Mn alloy[J]. Virtual and Physical Prototyping, 15, 325-339(2020).

[90] Soylemez E. High deposition rate approach of selective laser melting through defocused single bead experiments and thermal finite element analysis for Ti-6Al-4V[J]. Additive Manufacturing, 31, 100984(2020).

[91] Patel S, Chen H X, Vlasea M et al. The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy: AlSi10Mg[J]. Additive Manufacturing, 59, 103112(2022).

[92] McLouth T D, Bean G E, Witkin D B et al. The effect of laser focus shift on microstructural variation of Inconel 718 produced by selective laser melting[J]. Materials & Design, 149, 205-213(2018).

[93] Bean G E, Witkin D B, McLouth T D et al. Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting[J]. Additive Manufacturing, 22, 207-215(2018).

[94] Zhao Y H, Sun W Y, Wang Q et al. Effect of beam energy density characteristics on microstructure and mechanical properties of nickel-based alloys manufactured by laser directed energy deposition[J]. Journal of Materials Processing Technology, 319, 118074(2023).

[95] Chen X Y, Xie X L, Wu H et al. In-situ control of residual stress and its distribution in a titanium alloy additively manufactured by laser powder bed fusion[J]. Materials Characterization, 201, 112953(2023).

[96] Lu X F, Lin X, Chiumenti M et al. Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by directed energy deposition: modelling and experimental calibration[J]. Additive Manufacturing, 26, 166-179(2019).

[97] Polozov I, Kantyukov A, Popovich V et al. Microstructure and mechanical properties of TiAl-based alloy produced by selective laser melting[C], 1037-1041(2020).

[98] Gussone J, Hagedorn Y C, Gherekhloo H et al. Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures[J]. Intermetallics, 66, 133-140(2015).

[99] Deng H, Qiu W B, Chen L Q et al. Microstructure and mechanical property of Ti-5Al-5Mo-5V-3Cr-1Zr alloy fabricated by selective laser melting with a preheated substrate[J]. Advanced Engineering Materials, 23, 2100265(2021).

[100] Zhu S M, Katti I, Qiu D et al. Microstructural analysis of the influences of platform preheating and post-build heat treatment on mechanical properties of laser powder bed fusion manufactured AlSi10Mg alloy[J]. Materials Science and Engineering: A, 882, 145486(2023).

[101] Nezhadfar P D, Shamsaei N, Phan N. Enhancing ductility and fatigue strength of additively manufactured metallic materials by preheating the build platform[J]. Fatigue & Fracture of Engineering Materials & Structures, 44, 257-270(2021).

[102] Liang J W, Wu S B, Lei Z L et al. In-situ aging treatment by preheating to obtain high-strength ZK60 Mg alloy processed by laser powder bed fusion[J]. Materials Characterization, 194, 112361(2022).

[103] Chen Y X, Wang W H, Ou Y et al. Effect of high preheating on the microstructure and mechanical properties of high gamma prime Ni-based superalloy manufactured by laser powder bed fusion[J]. Journal of Alloys and Compounds, 960, 170598(2023).

[104] Chambrin N, Dalverny O, Cloue J M et al. In situ ageing with the platform preheating of AlSi10Mg alloy manufactured by laser powder-bed fusion process[J]. Metals, 12, 2148(2022).

[105] Krajňák T, Janeček M, Kozlík J et al. Influence of the thermal history on the phase composition of laser directed energy deposited Ti-8.5wt% Mo alloy[J]. Materials & Design, 222, 111049(2022).

[106] Cui C, Leitner H, Platl J et al. Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusion[J]. Materials Characterization, 197, 112689(2023).

[107] Ali H, Ma L, Ghadbeigi H et al. In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of selective laser melted Ti6Al4V[J]. Materials Science and Engineering: A, 695, 211-220(2017).

[108] Baek G Y, Lee K Y, Park S H et al. Effects of substrate preheating during direct energy deposition on microstructure, hardness, tensile strength, and notch toughness[J]. Metals and Materials International, 23, 1204-1215(2017).

[109] Zhou L B, Sun J S, Chen J et al. Study of substrate preheating on the microstructure and mechanical performance of Ti-15Mo alloy processed by selective laser melting[J]. Journal of Alloys and Compounds, 928, 167130(2022).

[110] Mertens R, Dadbakhsh S, van Humbeeck J et al. Application of base plate preheating during selective laser melting[J]. Procedia CIRP, 74, 5-11(2018).

[111] Müller A V, Schlick G, Neu R et al. Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000 ℃[J]. Nuclear Materials and Energy, 19, 184-188(2019).

[112] Li W, Liu J, Zhou Y et al. Effect of substrate preheating on the texture, phase and nanohardness of a Ti-45Al-2Cr-5Nb alloy processed by selective laser melting[J]. Scripta Materialia, 118, 13-18(2016).

[113] Shim D S, Baek G Y, Lee E M. Effect of substrate preheating by induction heater on direct energy deposition of AISI M4 powder[J]. Materials Science and Engineering: A, 682, 550-562(2017).

[114] Caprio L, Demir A G, Chiari G et al. Defect-free laser powder bed fusion of Ti-48Al-2Cr-2Nb with a high temperature inductive preheating system[J]. Journal of Physics: Photonics, 2, 024001(2020).

[115] Dalaee M T, Gloor L, Leinenbach C et al. Experimental and numerical study of the influence of induction heating process on build rates induction heating-assisted laser direct metal deposition (IH-DMD)[J]. Surface and Coatings Technology, 384, 125275(2020).

[116] Fan W, Tan H, Zhang F Y et al. Effect of synchronous induction heating on residual stress for laser-based directed energy deposition of thin-walled structures[J]. Materials Today Communications, 35, 105702(2023).

[117] Papadakis L, Chantzis D, Salonitis K. On the energy efficiency of pre-heating methods in SLM/SLS processes[J]. The International Journal of Advanced Manufacturing Technology, 95, 1325-1338(2018).

[118] Yan L, Zhang Y L, Liou F. A conceptual design of residual stress reduction with multiple shape laser beams in direct laser deposition[J]. Finite Elements in Analysis and Design, 144, 30-37(2018).

[119] Meng W, Zhang W H, Zhang W et al. Additive fabrication of 316L/Inconel625/Ti6Al4V functionally graded materials by laser synchronous preheating[J]. The International Journal of Advanced Manufacturing Technology, 104, 2525-2538(2019).

[120] Wei M, Yin X H, Wang Z et al. Additive manufacturing of a functionally graded material from Inconel625 to Ti6Al4V by laser synchronous preheating[J]. Journal of Materials Processing Technology, 275, 116368(2020).

[121] Meng W, Zhang W H, Zhang W et al. Fabrication of steel-Inconel functionally graded materials by laser melting deposition integrating with laser synchronous preheating[J]. Optics Laser Technology, 131, 106451(2020).

[122] Chen C P, Xiao Z X, Wang Y L et al. Prediction study on in situ reduction of thermal stress using combined laser beams in laser powder bed fusion[J]. Additive Manufacturing, 47, 102221(2021).

[123] Maurya H S, Kosiba K, Juhani K et al. Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process[J]. Additive Manufacturing, 58, 103013(2022).

[124] Zhang W Y, Abbott W M, Sasnauskas A et al. Process parameters optimisation for mitigating residual stress in dual-laser beam powder bed fusion additive manufacturing[J]. Metals, 12, 420(2022).

[125] Li X, Gagnoud A, Ren Z M et al. Investigation of thermoelectric magnetic convection and its effect on solidification structure during directional solidification under a low axial magnetic field[J]. Acta Materialia, 57, 2180-2197(2009).

[126] Li X, Fautrelle Y, Gagnoud A et al. Effect of a weak transverse magnetic field on solidification structure during directional solidification[J]. Acta Materialia, 64, 367-381(2014).

[127] Xu W, Surla V, Jaworski M A et al. Investigation of the heat transfer in TEMHD driven swirling lithium flow[J]. Journal of Nuclear Materials, 415, S981-S984(2011).

[128] Du D F, Wang L, Dong A P et al. Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion[J]. International Journal of Machine Tools and Manufacture, 183, 103965(2022).

[129] Wang L, Yan W T. Thermoelectric magnetohydrodynamic model for laser-based metal additive manufacturing[J]. Physical Review Applied, 15, 064051(2021).

[130] Zhou H X, Song C H, Yang Y Q et al. Effect of axial static magnetic field on microstructure evolution, performance, and melt pool signals of AlSi10Mg fabricated by laser powder bed fusion[J]. Optics Laser Technology, 163, 109316(2023).

[131] Kang N, Yuan H, Coddet P et al. On the texture, phase and tensile properties of commercially pure Ti produced via selective laser melting assisted by static magnetic field[J]. Materials Science & Engineering C, Materials for Biological Applications, 70, 405-407(2017).

[132] Zhu W L, Yu S, Chen C Y et al. Effects of static magnetic field on the microstructure of selective laser melted Inconel 625 superalloy: numerical and experiment investigations[J]. Metals, 11, 1846(2021).

[133] Du D F, Haley J C, Dong A P et al. Influence of static magnetic field on microstructure and mechanical behavior of selective laser melted AlSi10Mg alloy[J]. Materials & Design, 181, 107923(2019).

[134] Nie J W, Chen C Y, Shuai S S et al. Effect of static magnetic field on the evolution of residual stress and microstructure of laser remelted Inconel 718 superalloy[J]. Journal of Thermal Spray Technology, 29, 1410-1423(2020).

[135] Wang R, Wang J, Lei L M et al. Laser additive manufacturing of strong and ductile Al-12Si alloy under static magnetic field[J]. Journal of Materials Science & Technology, 163, 101-112(2023).

[136] Filimonov A M, Rogozin O A, Dubinin O N et al. Modification of mechanical properties in directed energy deposition by a static magnetic field: experimental and theoretical analysis[J]. Materials, 14, 5190(2021).

[137] Chen L W, Li H, Liu S et al. Simulation of surface deformation control during selective laser melting of AlSi10Mg powder using an external magnetic field[J]. AIP Advances, 9, 045012(2019).

[138] Bian Q F, Tang X L, Dai R K et al. Evolution phenomena and surface shrink of the melt pool in an additive manufacturing process under magnetic field[J]. International Journal of Heat and Mass Transfer, 123, 760-775(2018).

[139] Fan X Q, Fleming T G, Rees D T et al. Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturing[J]. Additive Manufacturing, 71, 103587(2023).

[140] Zhao R X, Chen C Y, Shuai S S et al. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field[J]. Materials Research Letters, 10, 530-538(2022).

[141] Smith P H, Murray J W, Jones D O et al. Magnetically assisted directed energy deposition[J]. Journal of Materials Processing Technology, 288, 116892(2021).

[142] Smith P H, Murray J W, Jackson-Crisp A et al. Magnetic manipulation in directed energy deposition using a programmable solenoid[J]. Journal of Materials Processing Technology, 299, 117342(2022).

[143] Zhou H X, Song C H, Yang Y Q et al. The microstructure and properties evolution of SS316L fabricated by magnetic field-assisted laser powder bed fusion[J]. Materials Science and Engineering: A, 845, 143216(2022).

[144] Ma G Y, Liu X, Song C C et al. TiCp reinforced Ti6Al4V of follow-up synchronous electromagnetic induction-laser hybrid directed energy deposition: microstructure evolution and mechanical properties[J]. Additive Manufacturing, 59, 103087(2022).

[145] Zheng Y, Cao L, Wang J et al. Surface morphology refinement and Laves phase control of plasma arc additively manufactured Inconel 718 via an alternating magnetic field[J]. Materials & Design, 223, 111161(2022).

[146] Yu Q D, Xu Z C, Zhao J et al. Experimental study on ultrasonic cavitation and acoustic streaming structure[J]. Journal of Applied Acoustics, 40, 865-870(2021).

[147] Guo A F, Tang R J, Guo S et al. Acoustic field-assisted powder bed fusion of tungsten carbide-reinforced 316L stainless steel composites[J]. Journal of Materials Research and Technology, 26, 5488-5502(2023).

[148] Yan Z W, Trofimov V, Song C H et al. Microstructure and mechanical properties of GH5188 superalloy additively manufactured via ultrasonic-assisted laser powder bed fusion[J]. Journal of Alloys and Compounds, 939, 168771(2023).

[149] Cong W L, Ning F D. A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel[J]. International Journal of Machine Tools and Manufacture, 121, 61-69(2017).

[150] Niu F Y, Li Y, Song C C et al. Microstructure and wear resistance of TiCp/Ti6Al4V composite coatings by follow-up ultrasonic-assisted laser additive manufacturing[J]. Coatings, 12, 986(2022).

[151] Wu D J, Song C C, Di T D et al. Intermetallic regulation mechanism of Inconel 718/Ti6Al4V composite by novel follow-up ultrasonic assisted laser additive manufacturing[J]. Composites Part B: Engineering, 235, 109736(2022).

[152] Gorunov A I. Additive manufacturing of Ti6Al4V parts using ultrasonic assisted direct energy deposition[J]. Journal of Manufacturing Processes, 59, 545-556(2020).

[153] Wang H, Hu Y B, Ning F D et al. Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: effects of ultrasonic frequency on microstructural and mechanical properties[J]. Journal of Materials Processing Technology, 276, 116395(2020).

[154] Todaro C J, Easton M A, Qiu D et al. Grain refinement of stainless steel in ultrasound-assisted additive manufacturing[J]. Additive Manufacturing, 37, 101632(2021).

[155] Chen Y J, Zhou Q. Directed energy deposition additive manufacturing of CoCrFeMnNi high-entropy alloy towards densification, grain structure control and improved tensile properties[J]. Materials Science and Engineering: A, 860, 144272(2022).

[156] Yao Z H, Wang Z, Chen J et al. Equiaxed microstructure formation by ultrasonic assisted laser metal deposition[J]. Manufacturing Letters, 31, 56-59(2022).

[157] Sun L B, Huang L J, Huang R S et al. Progress in the effect of ultrasonic impact treatment on microstructure improvement and strengthening mechanism in additive manufacturing[J]. Acta Metallurgica Sinica, 60, 273-286(2024).

[158] Zhang M X, Liu C M, Shi X Z et al. Residual stress, defects and grain morphology of Ti-6Al-4V alloy produced by ultrasonic impact treatment assisted selective laser melting[J]. Applied Sciences, 6, 304(2016).

[159] Wang Y C, Roy S, Choi H et al. Cracking suppression in additive manufacturing of hard-to-weld nickel-based superalloy through layer-wise ultrasonic impact peening[J]. Journal of Manufacturing Processes, 80, 320-327(2022).

[160] Zhou C P, Wang J D, Guo C H et al. Numerical study of the ultrasonic impact on additive manufactured parts[J]. International Journal of Mechanical Sciences, 197, 106334(2021).

[161] Wang F B, Liu Y K, Zhang B B et al. Strengthening effect in laser metal deposited Ti6Al4V alloy via layer-by-layer ultrasonic impact treatment[J]. Materials Science and Engineering: A, 886, 145693(2023).

[162] Wang Y C, Shi J. Microstructure and properties of Inconel 718 fabricated by directed energy deposition with in-situ ultrasonic impact peening[J]. Metallurgical and Materials Transactions B, 50, 2815-2827(2019).

[163] Xu L Y, Gao Y L, Zhao L et al. Ultrasonic micro-forging post-treatment assisted laser directed energy deposition approach to manufacture high-strength Hastelloy X superalloy[J]. Journal of Materials Processing Technology, 299, 117324(2022).

[164] Wei X, Li X L, Zhang L Q et al. Effect of in situ ultrasonic impact treatment on flow and solidification behavior of laser metal deposition: by finite element simulation[J]. International Journal of Heat and Mass Transfer, 192, 122914(2022).

[165] Wang Y C, Shi J. Recrystallization behavior and tensile properties of laser metal deposited Inconel 718 upon in situ ultrasonic impact peening and heat treatment[J]. Materials Science and Engineering: A, 786, 139434(2020).