Hydrothermal aging of moso bamboo: Degradation mechanisms and storage life prediction
Jia Hao, Su Wenhui, Huang Bin, He Xianxian, Fan Shaohui, Huang Zhoubin, Pan Chuanxia, and Liu Chenye
The fluctuations of storage temperature and humidity detrimentally affect the bamboo quality and longevity, making it crucial to investigate. Herein, we explored the physical and mechanical properties of moso bamboo (Phyllostachys edulis) subjected to 100-day moist heat cycling aging (MHCA-1: transitioning from low-temperature/high-humidity to high-temperature/low-humidity; MHCA-2: transitioning from low-temperature/low-humidity to high-temperature/high-humidity; CHT: 25 ℃-constant temperature and 60% relative humidity) alongside a control group. Employing a multiscale characterization and Random Forest (RF) modeling, we evaluated the impacts of temperature and humidity fluctuations on the bamboo quality, and the influence mechanism of storage conditions on its physical and mechanical properties were elucidated. Results indicated that elevated temperature and humidity led to remarkable fluctuation in bamboo moisture (from ?20.36% to 32.99%), weight gain (from ?32.69% to 6.19%), and dimensional expansion (from ?5.37% to 2.38%). Conversely, high-temperature and low-humidity drying conditions resulted in moisture loss and dimensional shrinkage. Total color difference (TCD) of bamboo cortex followed the order: MHCA-2 (7.46) < CHT (12.24) < MHCA-1 (20.10) < control (22.63). The TCD of bamboo pith positively was related with storage temperature. Periodic moist heat aging induced the permanent deformation in bamboo, reducing its elastic modulus by 30.05%–43.79%. Under moist heat aging conditions, the characteristic hemicellulose functional groups, including hydroxyl (?OH), carbonyl (C = O), ether (C–O–C), and aromatic C = C moieties exhibited remarkable structural modifications, i.e., peak weakening, shifting, or morphological alterations in Fourier transform infrared (FT-IR) spectra. Additionally, these conditions elevated the thermal decomposition onset temperature of cellulose while decreasing its peak intensity. Overall, the RF modeling approach demonstrated a high accuracy in predicting bamboo behavior under varying moisture-heat conditions. It improved bamboo storage and recycling by supporting sorting and grading with reliable long-term data.The fluctuations of storage temperature and humidity detrimentally affect the bamboo quality and longevity, making it crucial to investigate. Herein, we explored the physical and mechanical properties of moso bamboo (Phyllostachys edulis) subjected to 100-day moist heat cycling aging (MHCA-1: transitioning from low-temperature/high-humidity to high-temperature/low-humidity; MHCA-2: transitioning from low-temperature/low-humidity to high-temperature/high-humidity; CHT: 25 ℃-constant temperature and 60% relative humidity) alongside a control group. Employing a multiscale characterization and Random Forest (RF) modeling, we evaluated the impacts of temperature and humidity fluctuations on the bamboo quality, and the influence mechanism of storage conditions on its physical and mechanical properties were elucidated. Results indicated that elevated temperature and humidity led to remarkable fluctuation in bamboo moisture (from ?20.36% to 32.99%), weight gain (from ?32.69% to 6.19%), and dimensional expansion (from ?5.37% to 2.38%). Conversely, high-temperature and low-humidity drying conditions resulted in moisture loss and dimensional shrinkage. Total color difference (TCD) of bamboo cortex followed the order: MHCA-2 (7.46) < CHT (12.24) < MHCA-1 (20.10) < control (22.63). The TCD of bamboo pith positively was related with storage temperature. Periodic moist heat aging induced the permanent deformation in bamboo, reducing its elastic modulus by 30.05%–43.79%. Under moist heat aging conditions, the characteristic hemicellulose functional groups, including hydroxyl (?OH), carbonyl (C = O), ether (C–O–C), and aromatic C = C moieties exhibited remarkable structural modifications, i.e., peak weakening, shifting, or morphological alterations in Fourier transform infrared (FT-IR) spectra. Additionally, these conditions elevated the thermal decomposition onset temperature of cellulose while decreasing its peak intensity. Overall, the RF modeling approach demonstrated a high accuracy in predicting bamboo behavior under varying moisture-heat conditions. It improved bamboo storage and recycling by supporting sorting and grading with reliable long-term data.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 660 (2025)
- DOI：10.1016/j.jobab.2025.09.002
Hierarchically porous coaxial wet-spun cellulose/polyurethane based hexamethylene diisocyanate (PUH) solid-solid phase change fiber for enhanced thermal management
Yang Kang, Duan Chao, Wen Yijian, Tian Guodong, Ma Ruoteng, Liu Xiaoshuang, and Bie Yucheng
In the present study, we innovatively construct a porous sponge-like solid-solid phase change fiber (SSPCF) based on one-pot coaxial wet spinning process. For the core-sheath SSPCF, cellulose serves as the sheath precursor, while an isocyanate modified polyethylene glycol (PEG), namely polyurethane-based hexamethylene diisocyanate (PUH), acts as the core solid-solid phase change material (SSPCM). Upon the non-solvent induced phase separation (NIPS) during the wet spinning, the unique SSPCF with thin and dense sheath yet thick and porous sponge-like core were successfully fabricated, and they exhibited excellent slow heat release, high-temperature thermal protection. It is hypothesized that the porous structure within the fiber core primarily accounts for the superior temperature control heat release behavior and thermal insulation capability. Additionally, the prepared SSPCFs demonstrate high phase change enthalpy (105.26 J/g), high strength (10.38 MPa), excellent leak-proof and cyclic stability. Compared to solid-liquid phase change fibers (enthalpy: 110.7 J/g) and commercial polyethylene terephthalate (PET) fibers, the thermal response time (900 s) of the SSPCFs is extended by 300 s and 755 s, while their heat release time (450 s) is increased by 127 and 347 s, respectively. This research provides inspiration for the development of high-temperature insulation and slow heat release functional fibers and fabrics.In the present study, we innovatively construct a porous sponge-like solid-solid phase change fiber (SSPCF) based on one-pot coaxial wet spinning process. For the core-sheath SSPCF, cellulose serves as the sheath precursor, while an isocyanate modified polyethylene glycol (PEG), namely polyurethane-based hexamethylene diisocyanate (PUH), acts as the core solid-solid phase change material (SSPCM). Upon the non-solvent induced phase separation (NIPS) during the wet spinning, the unique SSPCF with thin and dense sheath yet thick and porous sponge-like core were successfully fabricated, and they exhibited excellent slow heat release, high-temperature thermal protection. It is hypothesized that the porous structure within the fiber core primarily accounts for the superior temperature control heat release behavior and thermal insulation capability. Additionally, the prepared SSPCFs demonstrate high phase change enthalpy (105.26 J/g), high strength (10.38 MPa), excellent leak-proof and cyclic stability. Compared to solid-liquid phase change fibers (enthalpy: 110.7 J/g) and commercial polyethylene terephthalate (PET) fibers, the thermal response time (900 s) of the SSPCFs is extended by 300 s and 755 s, while their heat release time (450 s) is increased by 127 and 347 s, respectively. This research provides inspiration for the development of high-temperature insulation and slow heat release functional fibers and fabrics.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 648 (2025)
- DOI：10.1016/j.jobab.2025.07.005
Antioxidative lignin materials attenuate type 2 diabetes mellitus (T2DM) progression by preserving glutathione via insulin receptor substrate 1/phosphoinositide 3-kinase/protein kinase B (IRS1/PI3K/AKT) axis
Qi Shuang, Yang Hui, Fang Tian, Zhang Tingwei, Jiang Bo, Manan Sehrish, Zhang Chaofeng, Wang Peng, Huang Caoxing, Wu Wenjuan, and Jin Yongcan
Lignin, a natural and renewable aromatic biopolymer, has gained attention in various biomedical applications due to its diverse structure, excellent biocompatibility, and antioxidant activity. However, the effects of lignin with tailored molecular weight on treating type 2 diabetes mellitus (T2DM) remain largely unexplored. In this study, a series of heterogeneous natural phenolic kraft lignin (KL) with tailored molecular weights, derived through an anti-sugar strategy, were prepared by continuous fractionation. The lignin fractions were categorized as F1, F2, and F3, corresponding to high, medium, and low molecular weights, respectively. Their therapeutic effects on T2DM were evaluated using a fractionated lignin culture cell model and intravenous injection into the tail vein of diabetic rats. The results demonstrated that lignin's protective effects in attenuating T2DM progression were molecular weight-dependent. Specifically, F3 reduced fasting blood glucose, reversed insulin resistance, and improved insulin sensitivity by mitigating oxidative stress and inflammatory responses. Mechanistic investigations revealed that F3 positively regulated glucose and lipid metabolism, inhibited hepatic gluconeogenesis, and enhanced hepatic glycogen synthesis by activating the insulin receptor substrate 1/phosphoinositide 3-kinase/protein kinase B (IRS1/PI3K/AKT) signaling pathway. Results revealed that lignin exerts its therapeutic effects on T2DM in a molecular weight-dependent manner, with IRS1/PI3K/AKT signaling as a potential underlying mechanism. This highlights lignin with a defined molecular weight as a promising candidate for T2DM treatment.Lignin, a natural and renewable aromatic biopolymer, has gained attention in various biomedical applications due to its diverse structure, excellent biocompatibility, and antioxidant activity. However, the effects of lignin with tailored molecular weight on treating type 2 diabetes mellitus (T2DM) remain largely unexplored. In this study, a series of heterogeneous natural phenolic kraft lignin (KL) with tailored molecular weights, derived through an anti-sugar strategy, were prepared by continuous fractionation. The lignin fractions were categorized as F1, F2, and F3, corresponding to high, medium, and low molecular weights, respectively. Their therapeutic effects on T2DM were evaluated using a fractionated lignin culture cell model and intravenous injection into the tail vein of diabetic rats. The results demonstrated that lignin's protective effects in attenuating T2DM progression were molecular weight-dependent. Specifically, F3 reduced fasting blood glucose, reversed insulin resistance, and improved insulin sensitivity by mitigating oxidative stress and inflammatory responses. Mechanistic investigations revealed that F3 positively regulated glucose and lipid metabolism, inhibited hepatic gluconeogenesis, and enhanced hepatic glycogen synthesis by activating the insulin receptor substrate 1/phosphoinositide 3-kinase/protein kinase B (IRS1/PI3K/AKT) signaling pathway. Results revealed that lignin exerts its therapeutic effects on T2DM in a molecular weight-dependent manner, with IRS1/PI3K/AKT signaling as a potential underlying mechanism. This highlights lignin with a defined molecular weight as a promising candidate for T2DM treatment.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 631 (2025)
- DOI：10.1016/j.jobab.2025.10.001
Modulating pore channels of activated carbon from biomass to assemble zinc ion hybrid supercapacitor with high specific capacitance
Qu Qiang, Xing Di, Chen Yongliang, and Zhu Mingqiang
A notable challenge in zinc ion hybrid supercapacitor (ZiHSC) is the size discrepancy between the carbon cathode pores and the [Zn·(H2O)6]2+ (diameter of ~0.86 nm), which weakens ionic migration kinetics and reduces energy density. To address this, wood-derived porous carbon with a hierarchical pore structure was synthesized via combined chemical and physical activation. The thermal reduction reaction between H2O steam and the marginal carbon atoms in the pre-existing pores was revealed, successfully enlarging pore diameters from 0.54 nm to 0.71 nm and 1.13 nm. The optimized electrode exhibited a specific capacitance of 412.76 F/g at the scan rate of 5 mV/s in a three-electrode system, and a specific capacity of 269.54 mAh/g at 0.2 A/g current density, and a high energy density of 210.76 Wh/kg at the power density of 1 296 W/kg (based on active material). Furthermore, it exhibited accelerated ion diffusion kinetics within the ZiHSC device and excellent cycling stability (93.55% capacity retention after 20,000 cycles). In situ X-ray powder diffraction (XRD) and Raman spectra revealed that the enhanced charge storage mechanism was coupled with dynamic phase transitions of Zn4SO4(OH)6·5H2O crystallites on electrode surface and the adsorption of Zn2+/[Zn·(H2O)6]2+ into hierarchical pore channel during discharge. This study presents a novel approach for improving the structural and supercapacitive properties of activated carbon materials, demonstrating excellent potential for practical applications.A notable challenge in zinc ion hybrid supercapacitor (ZiHSC) is the size discrepancy between the carbon cathode pores and the [Zn·(H2O)6]2+ (diameter of ~0.86 nm), which weakens ionic migration kinetics and reduces energy density. To address this, wood-derived porous carbon with a hierarchical pore structure was synthesized via combined chemical and physical activation. The thermal reduction reaction between H2O steam and the marginal carbon atoms in the pre-existing pores was revealed, successfully enlarging pore diameters from 0.54 nm to 0.71 nm and 1.13 nm. The optimized electrode exhibited a specific capacitance of 412.76 F/g at the scan rate of 5 mV/s in a three-electrode system, and a specific capacity of 269.54 mAh/g at 0.2 A/g current density, and a high energy density of 210.76 Wh/kg at the power density of 1 296 W/kg (based on active material). Furthermore, it exhibited accelerated ion diffusion kinetics within the ZiHSC device and excellent cycling stability (93.55% capacity retention after 20,000 cycles). In situ X-ray powder diffraction (XRD) and Raman spectra revealed that the enhanced charge storage mechanism was coupled with dynamic phase transitions of Zn4SO4(OH)6·5H2O crystallites on electrode surface and the adsorption of Zn2+/[Zn·(H2O)6]2+ into hierarchical pore channel during discharge. This study presents a novel approach for improving the structural and supercapacitive properties of activated carbon materials, demonstrating excellent potential for practical applications.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 616 (2025)
- DOI：10.1016/j.jobab.2025.08.002
Catalyst-free engineered robust cellulose ionogel for high-performance ionotronic devices
Yang Jiawei, Li Qingyuan, Lu Shengchang, Wu Hui, Huang Liulian, Chen Lihui, and Li Jianguo
Ionogels, a newly emerging type of gel material, are considered the most attractive candidate for constructing the next-generation ionotronic devices in the Internet of Things era. However, building robust and sustainable ionogels toward high-performance ionotronic devices in broad scenarios remains a huge challenge. Herein, a mechanically robust cellulose ionogel (RCI) via the facile “catalyst-free” yet chemically cross-linked engineering of cellulose molecules was developed. More specifically, ionic liquid, a typical cellulose solvent, and an ion-conductive component of cellulose ionogel were employed to afford the proton and replace the conventional, additional chemical catalyst, which indeed triggers the chemical reactions between cellulose and glutaraldehyde molecules, and thus creates the chemical-bonded, robust cellulose network of RCI. The prepared RCI (0.4 g glutaraldehyde to 0.6 g cellulose) demonstrated surprisingly high strength of ~11 MPa with 1 000% improvement and toughness of 2.8 MJ/m3 with 700% increase compared to the original cellulose ionogel (CI), as well as acceptable conductivity of 29.1 ms/cm, surpassing most ionogel materials. Such RCI easily constructed versatile ionotronic devices with unexpected voltage-pressure sensitivity, wide-range loading, and linear and steady-state output for self-powered, body motion, human health, and Morse-code information communication applications. The catalyst-free engineering paves the way toward easy-to-prepare, robust, and promising ionogels in our sustainable society, beyond the cellulose material.Ionogels, a newly emerging type of gel material, are considered the most attractive candidate for constructing the next-generation ionotronic devices in the Internet of Things era. However, building robust and sustainable ionogels toward high-performance ionotronic devices in broad scenarios remains a huge challenge. Herein, a mechanically robust cellulose ionogel (RCI) via the facile “catalyst-free” yet chemically cross-linked engineering of cellulose molecules was developed. More specifically, ionic liquid, a typical cellulose solvent, and an ion-conductive component of cellulose ionogel were employed to afford the proton and replace the conventional, additional chemical catalyst, which indeed triggers the chemical reactions between cellulose and glutaraldehyde molecules, and thus creates the chemical-bonded, robust cellulose network of RCI. The prepared RCI (0.4 g glutaraldehyde to 0.6 g cellulose) demonstrated surprisingly high strength of ~11 MPa with 1 000% improvement and toughness of 2.8 MJ/m3 with 700% increase compared to the original cellulose ionogel (CI), as well as acceptable conductivity of 29.1 ms/cm, surpassing most ionogel materials. Such RCI easily constructed versatile ionotronic devices with unexpected voltage-pressure sensitivity, wide-range loading, and linear and steady-state output for self-powered, body motion, human health, and Morse-code information communication applications. The catalyst-free engineering paves the way toward easy-to-prepare, robust, and promising ionogels in our sustainable society, beyond the cellulose material.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 601 (2025)
- DOI：10.1016/j.jobab.2025.08.001
Biofunctional cellulose fibers from mulberry bast via suberin nanointerface engineering
Zhai Wenxiang, Zhong Yijing, Zhang Wei, Ren Zechun, Ji Tong, Ding Kejiao, Chen Song, Wei Xinli, Cai Liping, Xia Changlei, and Xu Min
The development of yarn-free cellulose fibers from natural biomass provides a low-energy and environmentally conscious alternative for producing functional textiles. This study introduced a method for producing yarn-free cellulose fibers from the bast of Broussonetia papyrifera (paper mulberry), a fast-growing plant that does not require pesticides. The fibers were extracted using a mild alkaline treatment that preserved their alignment and allowed them to be knitted directly without traditional spinning. A coating of suberin, obtained from cork bark waste (Quercus variabilis), was applied using ethanol dispersion and fixed by heating at 110 ℃. The coating improved the fiber’s antibacterial performance, moisture response, and mechanical strength (tensile strength: 0.43 GPa; Young’s modulus: 6.4 GPa), while keeping the material flexible and washable. The suberin layer could be removed and reused through a recycling process involving ionic liquids, allowing over 95% recovery after multiple cycles. A life cycle assessment showed that this fiber system had a lower environmental impact compared to conventional synthetic textile fibers. Overall, this work provided a practical and recyclable approach to making functional textiles from natural plant materials.The development of yarn-free cellulose fibers from natural biomass provides a low-energy and environmentally conscious alternative for producing functional textiles. This study introduced a method for producing yarn-free cellulose fibers from the bast of Broussonetia papyrifera (paper mulberry), a fast-growing plant that does not require pesticides. The fibers were extracted using a mild alkaline treatment that preserved their alignment and allowed them to be knitted directly without traditional spinning. A coating of suberin, obtained from cork bark waste (Quercus variabilis), was applied using ethanol dispersion and fixed by heating at 110 ℃. The coating improved the fiber’s antibacterial performance, moisture response, and mechanical strength (tensile strength: 0.43 GPa; Young’s modulus: 6.4 GPa), while keeping the material flexible and washable. The suberin layer could be removed and reused through a recycling process involving ionic liquids, allowing over 95% recovery after multiple cycles. A life cycle assessment showed that this fiber system had a lower environmental impact compared to conventional synthetic textile fibers. Overall, this work provided a practical and recyclable approach to making functional textiles from natural plant materials.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 589 (2025)
- DOI：10.1016/j.jobab.2025.07.002
Sustainable anti-fibrillation and multifunction enhancement of lyocell fabric via electrostatic adsorption and discontinuous membrane formation
Wang Yongjin, Bao Wei, Li Hanyu, Fang Lei, Gao Hongguo, and Fang Kuanjun
Lyocell is a type of regenerated cellulose fiber with an eco-friendly production process and desirable properties. However, it is susceptible to fibrillation, which often results in pilling and diminished color appearance after laundering. Conventional anti-fibrillation methods are plagued by drawbacks such as significant strength loss, low utilization rates, formaldehyde release, and yellowing. To overcome these challenges, we developed an innovative approach involving the treatment of lyocell fibers with a cationic modifier (CM), poly(diallyldimethylammonium chloride), followed by the application of anionic polyacrylic acid emulsions (AEs). The effects of AE concentration, curing temperature, and curing time on anti-fibrillation performance were systematically evaluated. Through scanning electron microscopy (SEM), zeta potential, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FT-IR) analyses, we demonstrated that the anionic latex was effectively adsorbed onto the CM-treated fiber surface via electrostatic interactions. Upon curing, a discontinuous film formed on the fiber surface, which hindered water penetration and enhanced lateral cohesion between microfibrils under wet conditions. As a result, the modified fabrics exhibited markedly improved anti-fibrillation performance without compromising mechanical properties or whiteness. Furthermore, the air permeability of wet fabrics increased by 46.4%, and dyeing properties and glossiness were markedly enhanced. The results also indicate that this treatment has good abrasion resistance and durability. This study introduces a sustainable strategy for achieving multifunctional performance and green dyeability in cellulose textiles, thereby expanding their potential applications.Lyocell is a type of regenerated cellulose fiber with an eco-friendly production process and desirable properties. However, it is susceptible to fibrillation, which often results in pilling and diminished color appearance after laundering. Conventional anti-fibrillation methods are plagued by drawbacks such as significant strength loss, low utilization rates, formaldehyde release, and yellowing. To overcome these challenges, we developed an innovative approach involving the treatment of lyocell fibers with a cationic modifier (CM), poly(diallyldimethylammonium chloride), followed by the application of anionic polyacrylic acid emulsions (AEs). The effects of AE concentration, curing temperature, and curing time on anti-fibrillation performance were systematically evaluated. Through scanning electron microscopy (SEM), zeta potential, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FT-IR) analyses, we demonstrated that the anionic latex was effectively adsorbed onto the CM-treated fiber surface via electrostatic interactions. Upon curing, a discontinuous film formed on the fiber surface, which hindered water penetration and enhanced lateral cohesion between microfibrils under wet conditions. As a result, the modified fabrics exhibited markedly improved anti-fibrillation performance without compromising mechanical properties or whiteness. Furthermore, the air permeability of wet fabrics increased by 46.4%, and dyeing properties and glossiness were markedly enhanced. The results also indicate that this treatment has good abrasion resistance and durability. This study introduces a sustainable strategy for achieving multifunctional performance and green dyeability in cellulose textiles, thereby expanding their potential applications.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 576 (2025)
- DOI：10.1016/j.jobab.2025.05.003
Cellulose nanofibrils-stabilized legume protein-based pickering emulsions for capsaicin delivery: Fabrication, characterization, and encapsulation mechanism exploration☆
Zhu Jinpeng, Lu Yunhao, Xia Yumeng, and He Qiang
Capsaicin (CAP) faces limitations in its widespread application due to its low bioaccessibility. Pickering emulsions based on legume proteins are efficient for encapsulating bioactive compounds, but poor solubility and environmental sensitivity of proteins undermine emulsion stability. To tackle these challenges, this study developed a novel Pickering emulsion by using cellulose nanofibrils (CNFs) and chickpea protein isolate (CPI) for efficient CAP delivery. The combination of CPI and CNF at a ratio of 20?1 (w/w) exhibited the highest encapsulation efficiency (70.90% ± 1.66%) and sustained release properties during in vitro digestion, thereby enhancing CAP bioaccessibility from 39.40% ± 2.33% to 81.54% ± 1.95%. Notably, CNF also enhanced emulsion stability through enhanced hydrogen bonding, reduced droplet size (589.51 ± 47.08 nm), and increased hydrophobicity (contact angle: 85.83° ± 1.20°). Comprehensive characterization revealed that the incorporation of CNF significantly improved the colloidal properties of the emulsion, including its rheological behavior and thermal stability. Mechanistic investigations demonstrated that the enhanced encapsulation capability was attributed to the formation of stable hydrogen-bonding networks between CNF and CPI. Moreover, CAP is bound with CPI through synergistic hydrogen bonding and van der Waals interactions, with Arginine-179 identified as the key residue for binding (binding free energy: 10.46 kJ/mol). These findings offer valuable insights into the development of plant-based nanocarrier systems and highlight the potential of CNF-legume protein complexes in the delivery of bioactive compounds.Capsaicin (CAP) faces limitations in its widespread application due to its low bioaccessibility. Pickering emulsions based on legume proteins are efficient for encapsulating bioactive compounds, but poor solubility and environmental sensitivity of proteins undermine emulsion stability. To tackle these challenges, this study developed a novel Pickering emulsion by using cellulose nanofibrils (CNFs) and chickpea protein isolate (CPI) for efficient CAP delivery. The combination of CPI and CNF at a ratio of 20?1 (w/w) exhibited the highest encapsulation efficiency (70.90% ± 1.66%) and sustained release properties during in vitro digestion, thereby enhancing CAP bioaccessibility from 39.40% ± 2.33% to 81.54% ± 1.95%. Notably, CNF also enhanced emulsion stability through enhanced hydrogen bonding, reduced droplet size (589.51 ± 47.08 nm), and increased hydrophobicity (contact angle: 85.83° ± 1.20°). Comprehensive characterization revealed that the incorporation of CNF significantly improved the colloidal properties of the emulsion, including its rheological behavior and thermal stability. Mechanistic investigations demonstrated that the enhanced encapsulation capability was attributed to the formation of stable hydrogen-bonding networks between CNF and CPI. Moreover, CAP is bound with CPI through synergistic hydrogen bonding and van der Waals interactions, with Arginine-179 identified as the key residue for binding (binding free energy: 10.46 kJ/mol). These findings offer valuable insights into the development of plant-based nanocarrier systems and highlight the potential of CNF-legume protein complexes in the delivery of bioactive compounds.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 560 (2025)
- DOI：10.1016/j.jobab.2025.09.004
Design of bio-based P-N synergistic aerogels: Integrating phosphorylated chitosan into sodium alginate for fire-safe thermal insulation
Zhu Fengfan, Zhan Huanhui, Wang Chenfei, Fu Bo, and Zhou Jiancheng
In response to the growing demand for sustainable thermal management solutions, this study developed an eco-friendly flame-retardant aerogel through a green manufacturing process that incorporates bio-derived phosphorylated chitosan (PCS) into a sodium alginate (SA) matrix. The strategic incorporation of PCS, synthesized from renewable chitin resources, significantly enhanced the interfacial compatibility and thermal stability of the composite material while introducing a phosphorus-nitrogen synergistic flame-retardant mechanism. Systematic characterization revealed that the sodium alginate mixed with 30% that mass of phosphorylated chitosan (SA-30 PCS) exhibits exceptional fire safety performance, achieving a limiting oxygen index (LOI) of 33.7% and a V-0 rating in the vertical burning test (Underwriters Laboratories Standard 94), which indicates the highest level of flame resistance. Additionally, this formulation shows a 45% reduction in total heat release compared to pristine SA aerogels. The composite maintains low thermal conductivity (0.035 0 W/(m·K)), fulfilling dual requirements for high-temperature insulation and fire protection. A sustainable hydrophobic modification strategy employing methyltrichlorosilane vapor deposition further endowed the aerogel with moisture resistance. As a wholly biomass-derived system (SA/PCS), the aerogel eliminates persistent toxic residues associated with halogenated flame retardants, while its phosphorus components are covalently bonded in polymeric chains, significantly reducing environmental mobility compared to inorganic phosphates. The inherent biopolymer composition enables potential end-of-life management via enzymatic digestion (e.g., chitinase/alginate lyase), positioning it as an eco-design alternative for sustainable insulation.In response to the growing demand for sustainable thermal management solutions, this study developed an eco-friendly flame-retardant aerogel through a green manufacturing process that incorporates bio-derived phosphorylated chitosan (PCS) into a sodium alginate (SA) matrix. The strategic incorporation of PCS, synthesized from renewable chitin resources, significantly enhanced the interfacial compatibility and thermal stability of the composite material while introducing a phosphorus-nitrogen synergistic flame-retardant mechanism. Systematic characterization revealed that the sodium alginate mixed with 30% that mass of phosphorylated chitosan (SA-30 PCS) exhibits exceptional fire safety performance, achieving a limiting oxygen index (LOI) of 33.7% and a V-0 rating in the vertical burning test (Underwriters Laboratories Standard 94), which indicates the highest level of flame resistance. Additionally, this formulation shows a 45% reduction in total heat release compared to pristine SA aerogels. The composite maintains low thermal conductivity (0.035 0 W/(m·K)), fulfilling dual requirements for high-temperature insulation and fire protection. A sustainable hydrophobic modification strategy employing methyltrichlorosilane vapor deposition further endowed the aerogel with moisture resistance. As a wholly biomass-derived system (SA/PCS), the aerogel eliminates persistent toxic residues associated with halogenated flame retardants, while its phosphorus components are covalently bonded in polymeric chains, significantly reducing environmental mobility compared to inorganic phosphates. The inherent biopolymer composition enables potential end-of-life management via enzymatic digestion (e.g., chitinase/alginate lyase), positioning it as an eco-design alternative for sustainable insulation.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 545 (2025)
- DOI：10.1016/j.jobab.2025.08.004
An end-to-end microbial platform for 100% bio-based long-chain polyester: From renewable substrate to eco-friendly polymer
Park Jongbeom, Jeon Woo-Young, Jang Min-Jeong, Lee Hye-Jeong, Seo Sung-Hwa, Kim Young-Su, Park HyunA, Heo Kyung Taek, Pardhe Bashu Dev, Kim Hyunju, Park Dongjun, Ahn Ik-Sung, Bae Ye Won, Kang Hee Cheol, Chung Jae Woo, Jang Soon Ho, and Ahn Jung-Oh
The development of sustainable, eco-friendly polyesters from renewable resources is crucial for reducing dependence on petroleum-based plastics. However, despite advances in microbial production of bioplastics, significant challenges remain in achieving high conversion efficiency and scalability for industrial applications. This study is the first to report the synthesis of a 100% bio-based polyester using both 1,12-dodecanedioic acid (1,12-diacid) and 1,12-dodecanediol (1,12-diol) via a two-step microbial bioconversion from a single plant oil-derived alkane. An engineered Candida tropicalis strain produced 150 g/L of 1,12-diacid with a productivity of 1.53 g/(L·h) in a 5 L fed-batch system using a two-phase biotransformation strategy. Escherichia coli engineered to express carboxylic acid reductase, which reduces carboxylic acids to aldehydes, and its activation enzyme phosphopantetheinyl transferase, converted 1,12-diacid into 68 g/L 1,12-diol with a productivity of 1.42 g/(L·h) in a 5 L fed-batch system, representing high titer and productivity for microbial production of long-chain α,ω-diols. Both monomer production processes were successfully scaled up to a 50 L pilot fermenter, validating their potential for industrial implementation. A highly efficient downstream purification process was developed, achieving > 98% purity and recovery rates for both monomers. The bio-derived monomers enabled the synthesis of polyesters with molecular weight and thermal characteristics similar to petroleum-based monomers of the same chemical structure. This integrated approach establishes a robust and scalable microbial platform that converts renewable lipid feedstocks into fully bio-based polyesters, thereby demonstrating an environmentally sustainable and industrially viable route to circular bioeconomy-based polyester production.The development of sustainable, eco-friendly polyesters from renewable resources is crucial for reducing dependence on petroleum-based plastics. However, despite advances in microbial production of bioplastics, significant challenges remain in achieving high conversion efficiency and scalability for industrial applications. This study is the first to report the synthesis of a 100% bio-based polyester using both 1,12-dodecanedioic acid (1,12-diacid) and 1,12-dodecanediol (1,12-diol) via a two-step microbial bioconversion from a single plant oil-derived alkane. An engineered Candida tropicalis strain produced 150 g/L of 1,12-diacid with a productivity of 1.53 g/(L·h) in a 5 L fed-batch system using a two-phase biotransformation strategy. Escherichia coli engineered to express carboxylic acid reductase, which reduces carboxylic acids to aldehydes, and its activation enzyme phosphopantetheinyl transferase, converted 1,12-diacid into 68 g/L 1,12-diol with a productivity of 1.42 g/(L·h) in a 5 L fed-batch system, representing high titer and productivity for microbial production of long-chain α,ω-diols. Both monomer production processes were successfully scaled up to a 50 L pilot fermenter, validating their potential for industrial implementation. A highly efficient downstream purification process was developed, achieving > 98% purity and recovery rates for both monomers. The bio-derived monomers enabled the synthesis of polyesters with molecular weight and thermal characteristics similar to petroleum-based monomers of the same chemical structure. This integrated approach establishes a robust and scalable microbial platform that converts renewable lipid feedstocks into fully bio-based polyesters, thereby demonstrating an environmentally sustainable and industrially viable route to circular bioeconomy-based polyester production.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 530 (2025)
- DOI：10.1016/j.jobab.2025.09.005
Evaluating nanocellulose from food waste as a functional amendment for sandy soils: Linking fiber structure to water dynamics, soil mechanics, and plant-microbes interactions ✩
Dali M-Haidar Ali, Salim Mohamed Hamid, AbuZaid Malak, Qassem Maryam Omar Subhi, Marzooqi Faisal Al, Ceriani Andrea, Decarlis Alessandro, Dumée Ludovic Francis, and Tardy Blaise Leopold
Micro and nanofibers have the ability to imbue control over water transport properties and mechanical cohesion to granular materials. These key characteristics are proportional to the fiber size, if finely tuned, and can enable soils to more effectively host life. Typically, requirements include a high organic matter content, a rich microbiome, and especially physico-chemical properties conducive to water dynamics. Herein, we developed mechanochemical processes to fibrillate food-waste-based biomass (namely, peels) into a range of fiber solutions. Macrofibers and nanofibers were obtained via mild processing steps and were fully characterized, the relation between the morphology as well as physico-chemical properties of the fibers was thoroughly studied. Three sand types associated with deserts were evaluated for their potential benefits from the fiber amendments. The compressive response of the amended soils and, more importantly, their water holding, water permeability, and evaporation rate were thoroughly evaluated. The resistance of reinforced soil matrices to biodegradation and dry-wet cycling was also used to evaluate long-term performance. Finally, this study provides an outlook on nutrient retention for agricultural endeavors as a function of fiber amendment type and content.Micro and nanofibers have the ability to imbue control over water transport properties and mechanical cohesion to granular materials. These key characteristics are proportional to the fiber size, if finely tuned, and can enable soils to more effectively host life. Typically, requirements include a high organic matter content, a rich microbiome, and especially physico-chemical properties conducive to water dynamics. Herein, we developed mechanochemical processes to fibrillate food-waste-based biomass (namely, peels) into a range of fiber solutions. Macrofibers and nanofibers were obtained via mild processing steps and were fully characterized, the relation between the morphology as well as physico-chemical properties of the fibers was thoroughly studied. Three sand types associated with deserts were evaluated for their potential benefits from the fiber amendments. The compressive response of the amended soils and, more importantly, their water holding, water permeability, and evaporation rate were thoroughly evaluated. The resistance of reinforced soil matrices to biodegradation and dry-wet cycling was also used to evaluate long-term performance. Finally, this study provides an outlook on nutrient retention for agricultural endeavors as a function of fiber amendment type and content.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 513 (2025)
- DOI：10.1016/j.jobab.2025.09.003
Structural insights of sulfoethylated kraft lignin at different drying temperatures ✩
Bacchus Ameena, Gao Weijue and Fatehi Pedram
Sulfonated lignin has potential applications in various fields, including wastewater treatment, the textile industry, and construction. Although the reaction chemistry of sulfonated lignin has been well studied, the method of drying this material after synthesis has not been evaluated. In this study, sulfoethylated kraft lignin (SEKL) was synthesized as a representative sulfonated lignin to investigate the impact of drying temperature on its structure and properties. For SEKL, freeze-drying at –55 ℃ resulted in the highest charge density, water-solubility, and more uniform chemical structures. The sulfonic acid groups underwent alkylation reaction after the sample was oven-dried at 55 and 80 ℃, which was accompanied by a reduction in solubility and charge density of the sample, as well as an increase in glass transition temperature. Furthermore, the sample after drying at higher temperatures of 105 and 130 ℃ not only exhibited the alkylation but also underwent hydrolysis of the sulfonic acid groups at the phenolic position of lignin. This change was accompanied by a further reduction in molecular weight, solubility, and charge density, as well as a decrease in the glass transition temperature. It was found that the alkylation and hydrolysis of SEKL occurred to varying degrees, and higher temperatures promoted hydrolysis. Based on the results of this work, drying temperature has a significant effect on the properties of the SEKL sample, implying that it must be taken into account when considering its application in different fields.Sulfonated lignin has potential applications in various fields, including wastewater treatment, the textile industry, and construction. Although the reaction chemistry of sulfonated lignin has been well studied, the method of drying this material after synthesis has not been evaluated. In this study, sulfoethylated kraft lignin (SEKL) was synthesized as a representative sulfonated lignin to investigate the impact of drying temperature on its structure and properties. For SEKL, freeze-drying at –55 ℃ resulted in the highest charge density, water-solubility, and more uniform chemical structures. The sulfonic acid groups underwent alkylation reaction after the sample was oven-dried at 55 and 80 ℃, which was accompanied by a reduction in solubility and charge density of the sample, as well as an increase in glass transition temperature. Furthermore, the sample after drying at higher temperatures of 105 and 130 ℃ not only exhibited the alkylation but also underwent hydrolysis of the sulfonic acid groups at the phenolic position of lignin. This change was accompanied by a further reduction in molecular weight, solubility, and charge density, as well as a decrease in the glass transition temperature. It was found that the alkylation and hydrolysis of SEKL occurred to varying degrees, and higher temperatures promoted hydrolysis. Based on the results of this work, drying temperature has a significant effect on the properties of the SEKL sample, implying that it must be taken into account when considering its application in different fields.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 497 (2025)
- DOI：10.1016/j.jobab.2025.09.001
Multifunctional biomass materials based on electroless plating ✩
Zhang Qi, Tang Xiaohong, Zhao Qian, Chen Xianchun, Wang Ke, Zhang Qin, and Fu Qiang
The multifunctional utilization of biomass materials represents an effective strategy to address global resource shortages, mitigate environmental challenges, and support sustainable human development. However, the inherent insulating properties of most natural biomass materials significantly limit their applicability in advanced electronic technologies, including electromagnetic shielding, electrode capacitors, and triboelectric generators. Electroless plating (ELP), a versatile technique for metallization and functionalization, has attracted considerable attention over the past decade for its potential to endow biomass materials with tailored properties. This review provides a comprehensive analysis of ELP technology in the development of multidimensional functionalized biomass materials, emphasizing surface chemistry and functional applications. It outlines the underlying principles and recent technological advancements of ELP, as well as the properties and applications of metallized biomass materials. By achieving an optimal balance between functionality and ease of fabrication, the ELP demonstrates significant potential to expand the applications of biomass materials across various domains.The multifunctional utilization of biomass materials represents an effective strategy to address global resource shortages, mitigate environmental challenges, and support sustainable human development. However, the inherent insulating properties of most natural biomass materials significantly limit their applicability in advanced electronic technologies, including electromagnetic shielding, electrode capacitors, and triboelectric generators. Electroless plating (ELP), a versatile technique for metallization and functionalization, has attracted considerable attention over the past decade for its potential to endow biomass materials with tailored properties. This review provides a comprehensive analysis of ELP technology in the development of multidimensional functionalized biomass materials, emphasizing surface chemistry and functional applications. It outlines the underlying principles and recent technological advancements of ELP, as well as the properties and applications of metallized biomass materials. By achieving an optimal balance between functionality and ease of fabrication, the ELP demonstrates significant potential to expand the applications of biomass materials across various domains.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 476 (2025)
- DOI：10.1016/j.jobab.2025.01.001
Unveiling the potential of olive oil production residues as adsorbent materials for water treatment: A literature review ✩
Correia Iris, Fernandes Maria Eduarda and Marques-da-Silva Dorinda
Olive oil is a nutritionally and economically valuable product whose global production has steadily increased, alongside the generation of large volumes of solid and liquid waste. Olive oil mill wastewater and solid residues such as olive pomace and olive stones have become major environmental concerns due to their high pollutant load. At the same time, these byproducts offer an opportunity: their valorization as low-cost, sustainable adsorbents for water treatment. Addressing this dual environmental challenge, this review provides a comprehensive and systematized synthesis of the current state of research on the use of olive oil production residues for water decontamination via adsorption. Specifically, the study maps the types of byproducts used, their target pollutants, removal efficiencies, and adsorption capacities. Unlike previous reviews, this work emphasizes studies that apply raw or minimally processed residues, as well as experiments conducted with real wastewater or under environmentally relevant conditions. The data are presented in a structured and comparative format, highlighting promising results and underexplored combinations. By identifying trends, gaps, and practical applications, this review contributes to advancing the development of circular economy-based, eco-friendly solutions for water pollution control and provides a valuable resource for future research and implementation.Olive oil is a nutritionally and economically valuable product whose global production has steadily increased, alongside the generation of large volumes of solid and liquid waste. Olive oil mill wastewater and solid residues such as olive pomace and olive stones have become major environmental concerns due to their high pollutant load. At the same time, these byproducts offer an opportunity: their valorization as low-cost, sustainable adsorbents for water treatment. Addressing this dual environmental challenge, this review provides a comprehensive and systematized synthesis of the current state of research on the use of olive oil production residues for water decontamination via adsorption. Specifically, the study maps the types of byproducts used, their target pollutants, removal efficiencies, and adsorption capacities. Unlike previous reviews, this work emphasizes studies that apply raw or minimally processed residues, as well as experiments conducted with real wastewater or under environmentally relevant conditions. The data are presented in a structured and comparative format, highlighting promising results and underexplored combinations. By identifying trends, gaps, and practical applications, this review contributes to advancing the development of circular economy-based, eco-friendly solutions for water pollution control and provides a valuable resource for future research and implementation.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 460 (2025)
- DOI：10.1016/j.jobab.2025.07.001
Hydrothermal liquefaction of sewage sludge for circular bioeconomy: Focus on lignocellulose wastes, microplastics, and pharmaceuticals
Abbas Syed Comail, Alam Amna, Mian Md. Manik, Walker Colleen, and Ni Yonghao
The rapid increase in sewage sludge (SS) generation from wastewater treatment plants (WWTPs) has become a pressing global environmental challenge. The SS contains a wide variety of pollutants, including lignocellulose from plants and paper wastes, microplastics (MPs) from plastic wastes, and pharmaceutical residues (PRs), all of which pose substantial risks to ecosystems and human health. To address these waste management issues while also meeting rising energy demands, a shift towards a circular bioeconomy is essential. Hydrothermal liquefaction (HTL) of SS (SS-HTL) presents a sustainable solution by converting waste into renewable biofuels and mitigating environmental hazards. This review addresses five key areas: (1) an in-depth analysis of current advancements in SS-HTL technology; (2) factors influencing bio-oil production; (3) transformation pathways of lignocellulose, MPs, and PRs during HTL; (4) advanced methods for upgrading SS, including chemical, mechanical, and in situ liquefaction techniques; and (5) future perspectives on enhancing SS-HTL technology. Additionally, the review evaluates the potential applications of byproducts like the aqueous (AQ) phase, solid residues (SRs), and gases. By addressing the challenges in SS-HTL research and implementation, this article aims to improve economic feasibility and expand industrial applications. It serves as a valuable resource for researchers and innovators committed to advancing waste management technologies and accelerating the transition to a sustainable circular bioeconomy.The rapid increase in sewage sludge (SS) generation from wastewater treatment plants (WWTPs) has become a pressing global environmental challenge. The SS contains a wide variety of pollutants, including lignocellulose from plants and paper wastes, microplastics (MPs) from plastic wastes, and pharmaceutical residues (PRs), all of which pose substantial risks to ecosystems and human health. To address these waste management issues while also meeting rising energy demands, a shift towards a circular bioeconomy is essential. Hydrothermal liquefaction (HTL) of SS (SS-HTL) presents a sustainable solution by converting waste into renewable biofuels and mitigating environmental hazards. This review addresses five key areas: (1) an in-depth analysis of current advancements in SS-HTL technology; (2) factors influencing bio-oil production; (3) transformation pathways of lignocellulose, MPs, and PRs during HTL; (4) advanced methods for upgrading SS, including chemical, mechanical, and in situ liquefaction techniques; and (5) future perspectives on enhancing SS-HTL technology. Additionally, the review evaluates the potential applications of byproducts like the aqueous (AQ) phase, solid residues (SRs), and gases. By addressing the challenges in SS-HTL research and implementation, this article aims to improve economic feasibility and expand industrial applications. It serves as a valuable resource for researchers and innovators committed to advancing waste management technologies and accelerating the transition to a sustainable circular bioeconomy.
- Dec. 11, 2025
- Journal of Bioresources and Bioproducts
- Vol. 10, Issue 4, 427 (2025)
- DOI：10.1016/j.jobab.2025.02.001
Liquefied dimethyl ether as alternative extraction solvent for high γ-oryzanol rice bran oil: Systematic HSP theory and experimental evaluation
Daisuk Phannipha, Takami Seiichi, Honda Masaki, Goto Motonobu, Usaku Chonlatep, and Shotipruk Artiwan
This study aimed to systematically find an alternative solvent to replace hexane for the extraction of bio-oil with high γ-oryzanol content from rice bran (RB). The selection involved predicting solubility through Hansen solubility theory, experimental validation, determination of suitable extraction conditions, and comparison of oil quality with that of conventional hexane. A wide variety of solvents: subcritical water (SCW), supercritical carbon dioxide (SCCO2), bio-based solvents (alcohols and terpenes), and liquefied dimethyl ether (LDME), were initially assessed for rice bran oil (RBO) and γ-oryzanol solubility using Hansen solubility spheres. Solvents demonstrating high solubility for both RBO and γ-oryzanol, including LDME, ethyl acetate, acetone, and others (alcohols and SCCO2) known for effective vegetable oil extraction, were selected/identified for experimental extraction comparison. Among these, LDME performed better overall, affording greater solubility and requiring less solvent, shorter duration, lower pressure, and no additional co-solvents for equivalent extractions. Optimal conditions for LDME extraction were identified as 30 ℃ with a solvent-to-sample ratio of 10 mL/g and an extraction time of 10 min. Oils extracted with LDME and hexane displayed similar fatty acid compositions and no adverse effects on RB protein and carbohydrate structures after LDME extraction were observed. This study demonstrates LDME as a promising alternative to replace hexane for RBO extraction to further valorize this abundant low-cost RB residue into bio-oil and its γ-oryzanol and de-oil RB co-products.This study aimed to systematically find an alternative solvent to replace hexane for the extraction of bio-oil with high γ-oryzanol content from rice bran (RB). The selection involved predicting solubility through Hansen solubility theory, experimental validation, determination of suitable extraction conditions, and comparison of oil quality with that of conventional hexane. A wide variety of solvents: subcritical water (SCW), supercritical carbon dioxide (SCCO2), bio-based solvents (alcohols and terpenes), and liquefied dimethyl ether (LDME), were initially assessed for rice bran oil (RBO) and γ-oryzanol solubility using Hansen solubility spheres. Solvents demonstrating high solubility for both RBO and γ-oryzanol, including LDME, ethyl acetate, acetone, and others (alcohols and SCCO2) known for effective vegetable oil extraction, were selected/identified for experimental extraction comparison. Among these, LDME performed better overall, affording greater solubility and requiring less solvent, shorter duration, lower pressure, and no additional co-solvents for equivalent extractions. Optimal conditions for LDME extraction were identified as 30 ℃ with a solvent-to-sample ratio of 10 mL/g and an extraction time of 10 min. Oils extracted with LDME and hexane displayed similar fatty acid compositions and no adverse effects on RB protein and carbohydrate structures after LDME extraction were observed. This study demonstrates LDME as a promising alternative to replace hexane for RBO extraction to further valorize this abundant low-cost RB residue into bio-oil and its γ-oryzanol and de-oil RB co-products.
- Nov. 14, 2025
- Journal of Bioresources and Bioproducts
- Vol. 9, Issue 4, 577 (2024)
- DOI：10.1016/j.jobab.2024.06.002
Valorization of palm oil refining by-product for organotin mercaptide as a polyvinyl chloride thermal stabilizer: Synthesis, efficacy and comparison to mixed metal stearate
Putrawan I Dewa Gede Arsa and Azharuddin Adli
Organotin mercaptide-based thermal stabilizer is recognized for its effectiveness in enhancing thermal stability of polyvinyl chloride (PVC). In this study, we synthesized an organotin mercaptide-based thermal stabilizer from palm fatty acid distillate, which is a by-product of palm oil refining process, and then evaluated its thermal stabilizing effects on PVC and compared its efficacy and economics to those of mixed metal stearate. The synthesized thermal stabilizer manifests as methyltin mercaptoethyl carboxylate sulfides. Both dehydrochlorination and two-roll mill discoloration tests have demonstrated the high efficacy of the resulting thermal stabilizer in stabilizing PVC, surpassing the performance of mixed metal stearate, as evidenced by the lower dosage required. The synthesized PVC thermal stabilizer not only provides effective stabilization but also presents a competitive viable alternative.Organotin mercaptide-based thermal stabilizer is recognized for its effectiveness in enhancing thermal stability of polyvinyl chloride (PVC). In this study, we synthesized an organotin mercaptide-based thermal stabilizer from palm fatty acid distillate, which is a by-product of palm oil refining process, and then evaluated its thermal stabilizing effects on PVC and compared its efficacy and economics to those of mixed metal stearate. The synthesized thermal stabilizer manifests as methyltin mercaptoethyl carboxylate sulfides. Both dehydrochlorination and two-roll mill discoloration tests have demonstrated the high efficacy of the resulting thermal stabilizer in stabilizing PVC, surpassing the performance of mixed metal stearate, as evidenced by the lower dosage required. The synthesized PVC thermal stabilizer not only provides effective stabilization but also presents a competitive viable alternative.
- Nov. 14, 2025
- Journal of Bioresources and Bioproducts
- Vol. 9, Issue 4, 565 (2024)
- DOI：10.1016/j.jobab.2024.06.001
Enhanced biomass densification pretreatment using binary chemicals for efficient lignocellulosic valorization
Yuan Xinchuan, Shen Guannan, Huo Juncheng, Chen Sitong, Shen Wenyuan, Zhang Chengcheng, and Jin Mingjie
Many effective pretreatment methods (such as dilute acid, dilute alkali, ionic liquids, etc.) have been developed for lignocellulose upgrading, but several defaults of low working mass, high sugar loss and extra cost of solid-liquid separation and water washing hinder their large-scale application in industry. Besides, the valorization of lignin-rich residue from pretreated biomass after hydrolysis or fermentation greatly contributes to the economy and sustainability of lignocellulosic biorefinery, which is usually underestimated. This study developed a densification pretreatment with binary chemicals (densifying lignocellulosic biomass with sulfuric acid (SA) and metal salt (MS) followed by autoclave treatment ((DLCA(SA-MS)), which was conducted under mild condition (121 ℃) with a biomass working mass as high as 400 kg/m3. The DLCA(SA-MS) biomass achieved over 95% sugar retention, 90% enzymatic sugar conversion and a high concentration of fermentable sugar (212.3 g/L) with superior fermentability. Furthermore, bio-adsorbent derived from DLCA(SA-MS) biomass residue was highly adsorptive and suitable for dyeing wastewater treatment, providing a feasible and eco-friendly method for lignin-rich residue valorization. These findings indicated that DLCA(SA-MS) pretreatment enables the full-component utilization of biomass and boosts the economic viability of lignocellulosic biorefinery.Many effective pretreatment methods (such as dilute acid, dilute alkali, ionic liquids, etc.) have been developed for lignocellulose upgrading, but several defaults of low working mass, high sugar loss and extra cost of solid-liquid separation and water washing hinder their large-scale application in industry. Besides, the valorization of lignin-rich residue from pretreated biomass after hydrolysis or fermentation greatly contributes to the economy and sustainability of lignocellulosic biorefinery, which is usually underestimated. This study developed a densification pretreatment with binary chemicals (densifying lignocellulosic biomass with sulfuric acid (SA) and metal salt (MS) followed by autoclave treatment ((DLCA(SA-MS)), which was conducted under mild condition (121 ℃) with a biomass working mass as high as 400 kg/m3. The DLCA(SA-MS) biomass achieved over 95% sugar retention, 90% enzymatic sugar conversion and a high concentration of fermentable sugar (212.3 g/L) with superior fermentability. Furthermore, bio-adsorbent derived from DLCA(SA-MS) biomass residue was highly adsorptive and suitable for dyeing wastewater treatment, providing a feasible and eco-friendly method for lignin-rich residue valorization. These findings indicated that DLCA(SA-MS) pretreatment enables the full-component utilization of biomass and boosts the economic viability of lignocellulosic biorefinery.
- Nov. 14, 2025
- Journal of Bioresources and Bioproducts
- Vol. 9, Issue 4, 548 (2024)
- DOI：10.1016/j.jobab.2024.09.004
Development of Methylene Bis-Benzotriazolyl Tetramethylbutylphenol-grafted lignin sub-microspheres loaded with TiO2 for sunscreen applications
Li Yarong, Tang Zhiguang, Zhou Xiaohan, Zhang Junhua, Song Xueping, Li Kai, Liu Wei, and Zhang Zhanying
Lignin serves as a promising Ultraviolet (UV) absorber within sunscreen industry. However, the commercial development of lignin-containing sunscreens faces challenges due to their low sun protection factor (SPF) and dark color in cosmetics industry. In this study, dual modifications on the chemical and physical structures of lignin were conducted to address these challenges. Initially, methylene bis-benzotriazolyl tetramethylbutylphenol (MBBT) was grafted onto alkali lignin (AL) through an atom transfer radical polymerization reaction, resulting in a polymer of AL-graft-MBBT3 (AL-g-MBBT3). The sunscreen prepared with 10% AL-g-MBBT3 displays outstanding sun protection performance with a SPF of 42.93 and a light color with a color difference value (ΔE) of 45.6, in contrast to 10% AL with a SPF of 4.74 and a ΔE value of 49.5. Subsequently, AL-g-MBBT3 was transformed into normal submicron spheres (AL-g-MBBT3 N) and TiO2-loading submicron spheres (AL-g-MBBT3/TiO2). The sun protection performances of 10% AL-g-MBBT3 N@C and AL-g-MBBT3/TiO2@C sunscreens obviously surpass that of AL-g-MBBT3@C sunscreen, achieving SPFs of 60.38 and 66.20, respectively. Additionally, there is a considerable improvement in the color of these sunscreens, with ΔE values of 41.8 and 36.3, respectively. These results provide valuable insights into exploring lignin's high-value applications in sunscreen.Lignin serves as a promising Ultraviolet (UV) absorber within sunscreen industry. However, the commercial development of lignin-containing sunscreens faces challenges due to their low sun protection factor (SPF) and dark color in cosmetics industry. In this study, dual modifications on the chemical and physical structures of lignin were conducted to address these challenges. Initially, methylene bis-benzotriazolyl tetramethylbutylphenol (MBBT) was grafted onto alkali lignin (AL) through an atom transfer radical polymerization reaction, resulting in a polymer of AL-graft-MBBT3 (AL-g-MBBT3). The sunscreen prepared with 10% AL-g-MBBT3 displays outstanding sun protection performance with a SPF of 42.93 and a light color with a color difference value (ΔE) of 45.6, in contrast to 10% AL with a SPF of 4.74 and a ΔE value of 49.5. Subsequently, AL-g-MBBT3 was transformed into normal submicron spheres (AL-g-MBBT3 N) and TiO2-loading submicron spheres (AL-g-MBBT3/TiO2). The sun protection performances of 10% AL-g-MBBT3 N@C and AL-g-MBBT3/TiO2@C sunscreens obviously surpass that of AL-g-MBBT3@C sunscreen, achieving SPFs of 60.38 and 66.20, respectively. Additionally, there is a considerable improvement in the color of these sunscreens, with ΔE values of 41.8 and 36.3, respectively. These results provide valuable insights into exploring lignin's high-value applications in sunscreen.
- Nov. 14, 2025
- Journal of Bioresources and Bioproducts
- Vol. 9, Issue 4, 534 (2024)
- DOI：10.1016/j.jobab.2024.09.003
Valorization of the Caragana waste via two-stage bioaugmentation: Optimizing nutrition composition, palatability, and microbial contaminant control
Du Guilin, Tišma Marina, He Beiru, Zhai Xinghui, Yuan Chenyang, Su Zhengding, Shi Jiping, and Zhang Baoguo
Caragana korshinskii kom. (CKK) waste, a common forestry byproduct in northwest of China, presents challenges in its transformation into alternative ruminant feed due to its initial nutritional limitations and unappealing palatability. Conventional strategies, such as ensiling and fungal-based solid-state fermentation (SSF) cannot effectively address this issue in practice. Herein, a two-stage bioaugmentation (TBA) process was devised, leveraging the benefits of ensiling and SSF. During the anaerobic ensiling phase, CKK waste was inoculated with Lactiplantibacillus plantarum LP1, effectively suppressing potential animal pathogens such as Aspergillus and Nocardiopsis while enriching the material with potential probiotics like Pediococcus and Lactiplantibacillus, reaching an abundance of 95.7%. In the subsequent aerobic SSF stage, the ensiled CKK underwent inoculation with the white-rot fungus Irpex lacteus F17, which became enriched to 87.9%. Comprehensive multi-omics analysis identified Irpex as the key taxon, possessing an extensive redox enzyme system that led to the improvement in nutrient composition, reduction of astringent phenolic substances, and mitigation of mycotoxins. As a result, the crude protein content of the CKK increased by 39.2%, while lignin, total phenolic substances, and tannic acid content decreased by 24.4%, 52.2%, and 51.4%, respectively. The mycotoxin levels, including aflatoxin B1, zearalenone, and vomitoxin, were rendered negligible, confirming the safety. Overall, this study demonstrates the TBA strategy can successfully transform challenging and unpalatable CKK waste into a nutrient-enriched and safe mycelium-based bioproduct, thereby enabling the valorization of a previously underutilized forestry resource as a promising alternative feed.Caragana korshinskii kom. (CKK) waste, a common forestry byproduct in northwest of China, presents challenges in its transformation into alternative ruminant feed due to its initial nutritional limitations and unappealing palatability. Conventional strategies, such as ensiling and fungal-based solid-state fermentation (SSF) cannot effectively address this issue in practice. Herein, a two-stage bioaugmentation (TBA) process was devised, leveraging the benefits of ensiling and SSF. During the anaerobic ensiling phase, CKK waste was inoculated with Lactiplantibacillus plantarum LP1, effectively suppressing potential animal pathogens such as Aspergillus and Nocardiopsis while enriching the material with potential probiotics like Pediococcus and Lactiplantibacillus, reaching an abundance of 95.7%. In the subsequent aerobic SSF stage, the ensiled CKK underwent inoculation with the white-rot fungus Irpex lacteus F17, which became enriched to 87.9%. Comprehensive multi-omics analysis identified Irpex as the key taxon, possessing an extensive redox enzyme system that led to the improvement in nutrient composition, reduction of astringent phenolic substances, and mitigation of mycotoxins. As a result, the crude protein content of the CKK increased by 39.2%, while lignin, total phenolic substances, and tannic acid content decreased by 24.4%, 52.2%, and 51.4%, respectively. The mycotoxin levels, including aflatoxin B1, zearalenone, and vomitoxin, were rendered negligible, confirming the safety. Overall, this study demonstrates the TBA strategy can successfully transform challenging and unpalatable CKK waste into a nutrient-enriched and safe mycelium-based bioproduct, thereby enabling the valorization of a previously underutilized forestry resource as a promising alternative feed.
- Nov. 14, 2025
- Journal of Bioresources and Bioproducts
- Vol. 9, Issue 4, 518 (2024)
- DOI：10.1016/j.jobab.2024.07.004
OpticsNatural ScienceEngineeringAgricultureMedical ScienceInterdisciplinaryMultidisciplinaryAll Subjects
Slide
Optics Frontier—The 17th International Conference on Information Optics and Photonics (CIOP 2026)
Dec. 15, 2025
Journal Slide
Dec. 11, 2025
Journal
Dec. 11, 2025
Journal
Dec. 11, 2025
Theme Issue on Time-Varying Photonics (2025)
Submission Open:10 December 2025; Submission Deadline: 30 April 2026
Theme Issue on Time-Varying Photonics (2025)
Submission Open:10 December 2025; Submission Deadline: 30 April 2026
Special Issue on Advanced Direct Drive Laser Driven Fusion Research and Technology (2025)
Submission Open:1 August 2025; Submission Deadline: 30 November 2025
Editor (s): Dimitri Batani, Sebastien Le Pape, Jianqiang Zhu, Ping Zhu
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20