Journals >Opto-Electronic Advances
Contents
2021
Volume: 4 Issue 3
4 Article(s)
Export citation format
Original Article
Flexible rotation of transverse optical field for 2D self-accelerating beams with a designated trajectory
Lei Zhu, Xuesong Zhao, Chen Liu, Songnian Fu, Yuncai Wang, and Yuwen Qin
Self-accelerating beams have the unusual ability to remain diffraction-free while undergo the transverse shift during the free-space propagation. We theoretically identify that the transverse optical field distribution of 2D self-accelerating beam is determined by the selection of the transverse Cartesian coordinates, Self-accelerating beams have the unusual ability to remain diffraction-free while undergo the transverse shift during the free-space propagation. We theoretically identify that the transverse optical field distribution of 2D self-accelerating beam is determined by the selection of the transverse Cartesian coordinates, when the caustic method is utilized for its trajectory design. Based on the coordinate-rotation method, we experimentally demonstrate a scheme to flexibly manipulate the rotation of transverse optical field for 2D self-accelerating beams under the condition of a designated trajectory. With this scheme, the transverse optical field can be rotated within a range of 90 degrees, especially when the trajectory of 2D self-accelerating beams needs to be maintained for free-space photonic interconnection..
Opto-Electronic Advances
- Publication Date: Mar. 25, 2021
- Vol. 4, Issue 3, 200021-1 (2021)
Dynamic full-color digital holographic 3D display on single DMD
Chonglei Zhang, Dongfang Zhang, and Zhouping Bian
Digital holography has high potentials for future 3D imaging and display technology. We present a method for a dynamic full-color digital holographic 3D display on single digital micro-mirror device (DMD) with full-color, high-speed and high-fidelity characteristics. We combine the square regions of adjacent micro-mirrDigital holography has high potentials for future 3D imaging and display technology. We present a method for a dynamic full-color digital holographic 3D display on single digital micro-mirror device (DMD) with full-color, high-speed and high-fidelity characteristics. We combine the square regions of adjacent micro-mirrors into super-pixels that can modulate amplitude and phase independently. Gray images are achieved by amplitude modulation and precise positioning of each color is achieved by phase modulation. The proposed method realizes a full-color imaging based on the three primary colors and achieves measured structural similarity of more than 88% and color similarity of more than 98%, while retaining the high switch speed of 9 kHz, thus achieving dynamic full-color 3D display on charge-coupled device (CCD)..
Opto-Electronic Advances
- Publication Date: Mar. 25, 2021
- Vol. 4, Issue 3, 200049-1 (2021)
Review
Review of micromachined optical accelerometers: from mg to sub-μg
Qianbo Lu, Yinan Wang, Xiaoxu Wang, Yuan Yao, Xuewen Wang, and Wei Huang
Micro-Opto-Electro-Mechanical Systems (MOEMS) accelerometer is a new type of accelerometer which combines the merits of optical measurement and Micro-Electro-Mechanical Systems (MEMS) to enable high precision, small volume and anti-electromagnetic disturbance measurement of acceleration. In recent years, with the in-deMicro-Opto-Electro-Mechanical Systems (MOEMS) accelerometer is a new type of accelerometer which combines the merits of optical measurement and Micro-Electro-Mechanical Systems (MEMS) to enable high precision, small volume and anti-electromagnetic disturbance measurement of acceleration. In recent years, with the in-depth research and development of MOEMS accelerometers, the community is flourishing with the possible applications in seismic monitoring, inertial navigation, aerospace and other industrial and military fields. There have been a variety of schemes of MOEMS accelerometers, whereas the performances differ greatly due to different measurement principles and corresponding application requirements. This paper aims to address the pressing issue of the current lack of systematic review of MOEMS accelerometers. According to the optical measurement principle, we divide the MOEMS accelerometers into three categories: the geometric optics based, the wave optics based, and the new optomechanical accelerometers. Regarding the most widely studied category, the wave optics based accelerometers are further divided into four sub-categories, which is based on grating interferometric cavity, Fiber Bragg Grating (FBG), Fabry-Perot cavity, and photonic crystal, respectively. Following a brief introduction to the measurement principles, the typical performances, advantages and disadvantages as well as the potential application scenarios of all kinds of MOEMS accelerometers are discussed on the basis of typical demonstrations. This paper also presents the status and development tendency of MOEMS accelerometers to meet the ever-increasing demand for high-precision acceleration measurement..
Opto-Electronic Advances
- Publication Date: Mar. 25, 2021
- Vol. 4, Issue 3, 200045-1 (2021)
Light-emitting MXene quantum dots
Anir S. Sharbirin, Sophia Akhtar, and Jeongyong Kim
MXene (Mn+1Xn) is an emerging class of layered two-dimensional (2D) materials, which are derived from their bulk-state MAX phase (Mn+1AXn, where M: early transition metal, A: group element 13 and 14, and X: carbon and/or nitrogen). MXenes have found wide-ranging applications in energy storage devices, sensors, catalysiMXene (Mn+1Xn) is an emerging class of layered two-dimensional (2D) materials, which are derived from their bulk-state MAX phase (Mn+1AXn, where M: early transition metal, A: group element 13 and 14, and X: carbon and/or nitrogen). MXenes have found wide-ranging applications in energy storage devices, sensors, catalysis, etc. owing to their high electronic conductivity and wide range of optical absorption. However, the absence of semiconducting MXenes has limited their applications related to light emission. Research has shown that quantum dots (QDs) derived from MXene (MQDs) not only retain the properties of the parent MXene but also demonstrate significant improvement on light emission and quantum yield (QY). The optical properties and photoluminescence (PL) emission mechanisms of these light-emitting MQDs have not been comprehensively investigated. Recently, work on light-emitting MQDs has shown good progress, and MQDs exhibiting multi-color PL emission along with high QY have been fabricated. The synthesis methods also play a vital role in determining the light emission properties of these MQDs. This review provides an overview of light-emitting MQDs and their synthesis methods, optical properties, and applications in various optical, sensory, and imaging devices. The future prospects of light-emitting MQDs are also discussed to provide an insight that helps to further advance the progress on MQDs..
Opto-Electronic Advances
- Publication Date: Mar. 25, 2021
- Vol. 4, Issue 3, 200077-1 (2021)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20